| www.tmatlantic.com
Test & Soldering Equipment On-line Store |
|
D.E.V.I.C.E. (Wiki)Calculators Services |
|||||
Filter by first letter
|
Automatic MeasurementsSearch by section D.E.V.I.C.E. services
Delay A→B¯ means time delay measurement between the edges of two signals. The first edge should be rising and the second one – falling or vice versa.
FFF is one of the auto measurement types of a digital oscilloscope located in the time domain (“Delay” menu item), which is used for the measurement of the time delay between the first falling edge of channel 1 and the first falling edge of channel 2.
FFR - is one of the auto measurement types of a digital oscilloscope located in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first falling edge of channel 1 and the first rising edge of channel 2.
A type of automatic measurements. The measurement of U (shoot) at the bottom on the falling edge.
A type of automatic measurements. The measurement of U shoot at the top on the falling edge.
FRF - is one of the auto measurement types of a digital oscilloscope located in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first rising edge of channel 1 and the first falling edge of channel 2.
FRR - is one of the auto measurement types of a digital oscilloscope located in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first rising edge of channel 1 and the first rising edge of channel 2.
LFF is one of auto measurement types of a digital oscilloscope in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first falling edge of channel 1 and the last falling edge of channel 2.
LFR is one of auto measurement types of a digital oscilloscope in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first falling edge of channel 1 and the last rising edge of channel 2.
LRF is one of auto measurement types of a digital oscilloscope in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first rising edge of channel 1 and the last falling edge of channel 2.
Articles 11 - 20 of 34 First | Prev. | 1 2 3 4 | Next | Last |
Measurement History Events
|
|