Industry news

RSS

New Dual-Channel Multimeter from Tektronix Combines Highest Density with Industry Leading Performance
12/18/2018 | 1042
Tektronix, Inc., a leading worldwide provider of measurement solutions, introduced the Keithley DMM7512 dual channel 7½-digit sampling multimeter that packs two independent and identical digital multimeters into a low profile 1U high, full rack width space-saving enclosure. Featuring industry leading density and performance, the DMM7512 is ideally suited for a range of demanding high-volume manufacturing test applications that require measurement capacity, performance and a compact footprint.

Rohde & Schwarz presents new modular RF switch and control platform for a wide range of test scenarios
12/14/2018 | 892
Test setups for new technologies such as 5G and state-of-the-art radar technology require switch and control technology with large frequency ranges and short switching times. To meet this requirement, Rohde & Schwarz has completely revised its platform and now presents the new R&S OSP220/230/320 units and the new R&S OSP-B200S2 satellite box.

Anritsu Expands Industry-leading PIM Master™ Field Analyzer Family with Introduction of Model Supporting LTE at 600 MHz
12/11/2018 | 879
Anritsu Company introduces the PIM Master™ MW82119B-0600, a 600 MHz field passive intermodulation (PIM) analyzer to verify installation of LTE at 600 MHz cell sites currently being deployed. Leveraging the industry-leading performance of the PIM Master platform, the new model supports 600 MHz PIM measurements generated by IM3 and IM5 products and has a second built-in 1900 MHz-receiver port to measure PIM generated by third harmonic products falling in the 1900 MHz PCS bands.

Keysight Technologies, SGS Extend Collaboration on 5G Conformance Testing
12/07/2018 | 932
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers, and governments accelerate innovation to connect and secure the world, announced that the company has extended its collaboration with SGS, a world-leading inspection, verification, testing and certification company, on 5G conformance testing.

NI Trend Watch 2019 Explores the Internet of Things, the Commercial Deployment of 5G and Autonomous Driving for the Masses
12/04/2018 | 888
NI (Nasdaq: NATI), the provider of a software-defined platform that helps accelerate the development and performance of automated test and automated measurement systems, announced the release of NI Trend Watch 2019. The report examines the most crucial engineering trends and challenges of the changing technology landscape, including the Internet of Things (IoT), the progression of 5G technology from prototyping to commercial deployment and autonomous driving for the masses.

Tektronix Redefines the Arbitrary/Function Generator
11/30/2018 | 946
Tektronix, Inc., a leading worldwide provider of measurement solutions, announced that it has redefined the arbitrary/function generator (AFG) with the introduction of the AFG31000 series. A completely new design, the AFG31000 features many key firsts including the industry's largest touchscreen and new user interface that will delight engineers and researchers who need to generate increasingly complex test cases for debugging, troubleshooting, characterizing and validating devices under test.

Anritsu Introduces 5G NR Signal Generation Software for MG3710A and MS269xA Series
11/27/2018 | 895
Anritsu Company introduces two 5G New Radio (NR) TDD sub-6 GHz IQproducer™ software packages for its Vector Signal Generator MG3710A and Signal Analyzer MS2690A/MS2691A/MS2692A series with a vector signal generator installed. The new software provides engineers developing and manufacturing 5G NR mobiles terminals and wireless communications equipment with a solution that speeds time-to-market and lowers test costs.

Rohde & Schwarz adds new handheld microwave spectrum analyzers to its R&S Spectrum Rider FPH family
11/23/2018 | 1037
Rohde & Schwarz has expanded its successful R&S Spectrum Rider FPH family with three new base models providing frequency ranges from 5 kHz to 6 GHz, 13.6 GHz and 26.5 GHz. The R&S Spectrum Rider FPH was the industry's first handheld spectrum analyzer to offer a capacitive touchscreen and a unique frequency upgrade concept via keycodes. Since upgrades require neither downtime nor recalibration, users can effortlessly upgrade their base models, e.g. from 26.5 GHz to 31 GHz.

Keysight Technologies, FormFactor, Industrial Technology Research Institute Collaborate to Deliver Silicon Photonics Test and Measurement Solution
11/20/2018 | 860
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers, and governments accelerate innovation to connect and secure the world, announced a collaboration with FormFactor and the Industrial Technology Research Institute (ITRI) to accelerate integrated photonics innovation.

NI Announces New FlexRIO Transceiver for Prototyping and Testing High Bandwidth Radar Systems
11/16/2018 | 862
National Instruments, the provider of a software-defined platform that helps accelerate the development and performance of automated test and automated measurement systems, announced the FPGA-enabled PXIe-5785 FlexRIO transceiver, which aims to shorten the design cycle for advanced radar applications in aerospace and defense.


News 541 - 550 of 1368
First | Prev. | 53 54 55 56 57 | Next | Last
AKTAKOM - the Best in Test Award Winner!
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024