AKTAKOM ATK-2103 clamp meter and multimeter
You no longer need to buy these two separate devices if you need them both for work. AKTAKOM ATK-2103 is a clamp meter but at the same time it can be used as a multimeter!
ATK-2103 is capable of measuring up to 8 electric quantities, continuity testing. Big diameter of clamp meter jaws allows you to measure current in flat wires 2.4 in / 60 mm wide as well as round wires with 2 in / 50 mm diameter.
- 2 in 1, 2000 A clamp meter + Digital multimeter
- True RMS reading for ACV & ACA measurement
- 4000 counts, Auto range, multi-functions for ACA, DCA, ACV, DCV, Ohms, Capacitance, Hz, Duty cycle, diode and continuity test
- Wide ranges (2000A, 400 A) clamp on current measurement both for ACA and DCA
- 4 ranges (400 µA, 4000 µA, 40 mA, 400 mA) direct current input measurement both for ACA and DCA
- LSI circuit provides high reliability and durability
- Overload protection circuit is provided for all ranges
- Data hold
- Display: 0.6 in / 15 mm, 4 digit LCD, max. indication: 4000
- Measurement range: ACA, DCA, ACV, DCV, Ohms, Capacitance, Hz, Duty cycle, diode and continuity test
- Polarity: Automatic switching
- Current Sensor: Hall effect sensor
- Over-input: Indication of "1" or "-1"
- Sampling time: 0.35 sec. approx.
- Battery: DC 9V battery, heavy duty or Alkaline type, 006P, MN1604 ( PP3) or equivalent
- Power consumption: approx. DC 5 mA
- Operating temperature: 32°F to 122°F / 0°C to 50°C
- Operating humidity: less than 80% RH
- Dimensions: 10 x 2.9 x 1.5 in / 255 x 73 x 38 mm
- Weight: 0.85 lb / 380 g
Discount price for this very model is $130 only! More details can be checked on page of AKTAKOM ATK-2103.
Back to the list
Design. Engineering. Value. Interest. Creativity. Encyclopedia.