Industry news

RSS

The R&S MNT100 RF interference locator from Rohde & Schwarz introduces expert interference hunting in mobile networks
11/17/2017 | 1133
Unwanted transmitters are pervasive in today’s mobile networks. They degrade network capacity and subscriber QoE, making interference hunting a key issue for mobile network operators and regulators. The new handheld R&S MNT100 RF interference locator from Rohde & Schwarz uses receiver technology and intelligent processing to quickly detect, analyze and locate even complex pulsed interference signals.

TI enables designers to achieve a new low in standby power
11/14/2017 | 1049
Texas Instruments (TI) introduced a new inductor-inductor-capacitor (LLC) resonant controller with an integrated high-voltage gate driver that enables the industry's lowest standby power, as well as longer system lifetimes.

Keysight Technologies Launches Industry-First Automotive Ethernet Solutions for Standards-Compliance of BroadR-Reach,100Base-T, 1000Base-T Devices
11/10/2017 | 1522
Keysight Technologies, Inc. unveiled a total of five new automotive Ethernet solutions at the Automotive Testing Expo 2017, Suburban Collection Showplace, Booth 2008, Novi, Michigan, Oct. 24-26. These solutions help automotive design and test engineers bring their products to market faster with easy-to-use conformance testing.

NI Announces an Automated Solution for Turning Big Analog Data™ Complexities Into Insights
11/07/2017 | 971
NI, the provider of platform-based systems that enable engineers and scientists to solve the world’s greatest engineering challenges, announced the release of the Data Management Software Suite. This enterprise software solution offers a complete workflow to standardize measurement data across teams, mine that data for useful information, transform the data through automated analysis and deliver reports with valuable insight.

New R&S ZN-Z32/33 vector network analyzer calibration solution for TVAC and multiport production testing
11/03/2017 | 1066
Rohde & Schwarz presents new vector network analyzer calibration equipment: the R&S ZN-Z32 and R&S ZN-Z33 inline calibration units. These calibration units are ideal for satellite component testing in thermal vacuum chambers (TVAC) and for multiport component testing on production lines.

Keysight Technologies Adds Signal Demodulation, Vector Signal Analysis, I/Q Analysis to its FieldFox Handheld Analyzers
10/31/2017 | 1197
Keysight Technologies, Inc. announced new enhancements for its FieldFox handheld RF and microwave analyzers. FieldFox analyzers now connect to Keysight's 89600 VSA software, the industry's leading toolset for signal demodulation and vector signal analysis.

Industry First Multi-Region V2X Message Analysis for Vehicle-to-Vehicle and Vehicle-to-Roadside Communications Standards Introduced by Anritsu
10/27/2017 | 983
Anritsu Company introduces the V2X 802.11p Evaluation Software MX727000A, a first of its kind solution that supports V2X message analysis for U.S., Europe, and Japan vehicle-to-vehicle and vehicle-to-roadside (V2X) communications standards.

NI and Innovari Help Grid Operators Improve Utilization, Lower Costs
10/24/2017 | 1020
NI, the provider of platform-based systems that enable engineers and scientists to solve the world’s greatest engineering challenges, announced a technology collaboration with Innovari to help utility companies around the world improve system utilization, manage distributed energy resources and foster relationships between customers, local communities and regulators.

Keysight Technologies Collaborates with Bluetest on NarrowBand-Internet of Things Over-the-Air Test Solution
10/20/2017 | 1071
Keysight Technologies, Inc. announced the collaboration with Bluetest on the successful creation of a narrowband - internet of things (NB-IoT)) over-the-air (OTA) solution for use in Bluetest Reverberation Test Systems (bluetest.se/products/chambers). The solution, used by one of Japan's top operator customers, demonstrates the market leading position of both companies in NB-IoT test.

NEP Australia Selects Tektronix to Monitor Hybrid IP/SDI Video Production Infrastructure
10/17/2017 | 1026
Tektronix, Inc., an industry-leading innovator of video test and monitoring solutions, announced that NEP Australia, leading provider of outsourced broadcast production solutions, has selected Tektronix as a key technology provider for the broadcaster's move to an IP-enabled production infrastructure based on the SMPTE ST-2110 standard for video over IP. NEP has purchased a range of Tektronix equipment for its IP build out including both standalone and rackmount PRISM hybrid IP/SDI media analysis instruments as well as SPG8000A hybrid sync generator and PTP grandmaster clock units, ECO8000 automatic changeover devices and WFM5200 waveform monitors.


News 651 - 660 of 1368
First | Prev. | 64 65 66 67 68 | Next | Last
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024