DP-25 Differential Probe

DP-25 Differential Probe
Click an image to enlarge

Retail price: $225.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Sold out

Subscribe

The DP-25 differential probe provides a safety means for measuring differential voltage for all models of oscilloscopes.

The DP-25 converts high differential voltage into low voltage and displays the result on the oscilloscope screen. DP-25 is designed to operate with 1MΩ impendance oscilloscopes. When combining with the 50Ω load, the attenuation will be 2 times.

Specifications

  • Bandwidth: DC to 25 MHz (-3 dB)
  • Attenuation: x20, x50, x200
  • Accuracy: ±2%
  • Voltage Input Ranges (DC + AC peak to peak)
    • ≤140 Vp-p for x20 (about 45 Vrms or DC)
    • ≤350 Vp-p for x50 (about 110 Vrms or DC)
    • ≤1400 Vp-p for x200 (about 450 Vrms or DC)
  • Permitted Max Input Voltage
    • Max differential voltage: 1400 V (DC + AC peak to peak) or 450 Vrms
    • Max voltage between each input terminal and ground: 600 Vrms
  • Input Impedance:
    • Differential: 4 MΩ / 1.2 pF
    • Between terminals and ground: 2 MΩ / 2.3 pF
  • Output: ≤±7.0 V
  • Output Impedance: 50 Ω
  • Rise Time: 14 ns
  • Rejection Rate on Common Mode:
    • 60 Hz: > 80 dB
    • 100 Hz: > 60 dB
    • 1 MHz: > 50 dB
  • External 9 V DC power supply
  • Consumption: < 300 mA max
  • Operating Temperature / Relative Humidity: 0°C ... +50°C / 10 % ... 85 % RH
  • Storage Temperature / Relative Humidity: -30°C ... +70°C / 10 % ... 90 % RH
  • Dimensions: 7.68 x 2.17 x 1.18 in / 195 x 55 x 30 mm
  • Weight: 250g
  • Electrical Safety to IEC 1010-1
    • Dual Insulation
    • Installation Category III
    • Degree of Pollution 2
    • Rated Voltage or Max Line-Earth: 600 Vrms

Included Accessories

  • An Insulated BNC/BNC lead, length 100cm
  • AC Adapter
  • High voltage IC clips
  • Banana to Banana high voltage plug
  • Alligator plug
  • Instruction Manual

La sonda diferencial DP-25 ofrece una gran seguridad para la medición de tensión diferencial para todos los modelos de osciloscopios.

El DP-25 convierte el voltaje diferencial de alta en baja tensión y muestra el resultado en la pantalla del osciloscopio. DP-25 está diseñado para funcionar con 1MΩ osciloscopios impedancia. Cuando se combina con la carga de 25Ω, la atenuación será 2 veces.


Back to the section
AKTAKOM - the Best in Test Award Winner!
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024