|
DPS-3005D 150W Variable LED Display Digital Adjustable Switching DC Power Supply
DPS-3005D 150W Variable LED Display Digital Adjustable Switching DC Power Supply
DPS-3005D switching DC power supply provides stabilized DC voltage and current with low noise.
Features
- Response and high accuracy when compared with linear power supply.
- Output voltage and output current between 0 to rated value is continuously adjustable.
- Constant voltage and constant current can automatic conversion.
- Overload and reverse polarity protection keep power supply and its loads safe from unexpected conditions.
- LED digital display output voltage and output current.
- Cooling fan is connected with temperature sensor. Its can reduce the fan speed automatically when the internal temperature or load decreases to prevent the additional noise.
- Single Output.
- Has A / mA converter to display the current function and four voltage and current display.
- Dual LED show voltage (red), current (blue)
Channels | 1 |
Output voltage (V) | 30 |
Output voltage accuracy | ±(0.01% + 2 mV) |
Output voltage display resolution | 1 mV |
Output current (A) | 5 |
Output current display resolution | 1 mA |
Output power | 150 W |
Power supply | 220 V |
Accuracy tables
"Absolute measurement error" service allows you to estimate the measurement accuracy considering uncertainty (error) in the absolute value. It's important if you take measurements at the range edge when the error value contributes to the value displayed on the device screen. To get the value range it'd be enough to enter the estimate of the value under measurement into Value input field and to see the range of possible values taking all of the standardized errors into consideration. Note: a point is used as a separator of the integer and fractional part.
Output voltage
Specifications
- Output Voltage: 0~30V
- Output Current: 0~5A
- Ripple and Noise: ≤1mVrms (RMS)
- Load stability: ≤0.01% + 2mV
- Regulation accuracy: ≤0.01% + 2mV
- Output terminals: three output terminals.
- Protection: over-current protection.
- Current/Voltage display Accuracy: 4 LED Display
- Display Resolutions: 0.001V, 0.001A
- Operating Temperature: -10°C -40°C
- Input voltage: 220V ± 10% 50Hz ~ 60Hz
- AC Input Fuse: 1.5A
- Weight: 4.8 kg
- Dimensions: 275 x 126 x 160 mm
Back to the section
|
|
|
|