Depending on a destination shipping cost may vary. Free shipping for orders over $450 on items weighting under 20 lbs (certain restrictions apply!) See shipping page for international rates or contact sales@tmatlantic.com
Description
Specifications
Accessories
Application
FAQ
Software
Descripción
ATE-1034 Hot Wire Anemometer-Thermometer with Excel-formatted Data Logging SD Card and "K/J" Port is a combination of hot wire and standard thermistor; the device makes rapid and precise measurements even at low air velocity value.
Features:
Slim probe, ideal for grilles & diffusers
Air velocity: m/s, Ft/min, Km/h, Knot, Mile/h
Air temperature (°C, °F)
Air Temp. used thermistor sensor, fast response time
Type K, Type J thermocouple thermometer
Real time SD memory card Datalogger, Built-in Clock and Calendar, real time data recorder, sampling time set from 1 second to 3600 seconds
Manual datalogger is available (set the sampling time to 0), during the use of manual datalogger function it can set the different position (location) No. (position 1 to position 99)
Innovation and easy operation, computer doesn’t need any extra software, after the datalogger use just take the SD card away from the meter and plug in the SD card into the computer, it can download all of the measured value with the time information (year/month/date/hour/minute/second) to the Excel directly; then users can make the further data or graphic analysis by themselves
SD card capacity: 1 GB to 16 GB
LCD with green light backlight, easy reading
Can default auto power off or manual power off
Data hold, record max. and min. reading
Microcomputer circuit, high accuracy
Power by UM3/AA (1.5 V) x 6 batteries or DC 9V adapter
Interface: RS-232, USB via interface converter
Separate probe, easy for operation of different
measurement environment
Applications: environmental testing, air conveyors, flow hoods, clean rooms, air velocity, air balancing, fans/motors/blowers, furnace velocity, refrigerated case, paint spray booths
Instrument: 8 x 3 x 1.5 in / 203 x 76 x 38 mm, Probe: 0.47 in / 12 mm Dia
Specifications:
General Specifications:
Circuit: Custom microprocessor LSI circuit
Display:
LCD size: 2.1in x 1.5in / 52mm x 38mm
LCD with green backlight (ON/OFF)
Measurement:
Air velocity:
m/S (meters per second)
Km/h (kilometers per hour)
Ft/min (FPM, feet per minute)
Knots (nautical miles per hour)
Mile/h (mph, miles per hour)
Air temperature: °C, °F Type K/ Type J thermometer: °C, °F
Measurement:
Air velocity:
m/s (meters per second)
Km/h ( kilometers per hour )
Ft/min ( FPM, feet per minute )
Knots ( nautical miles per hour )
Mile/h ( mph, miles per hour )
Air temperature: °C, °F
Type K/ Type J thermometer: °C, °F
Sensor Structure:
Air velocity & Air flow: Tiny glass bead thermistor
Air temperature: Thermistor
Type K, Type J thermometer: Type K/J thermocouple probe, Probes are optional
Datalogger / Sampling Time / Setting range:
Auto:
1 second to 3600 seconds
Sampling time can set to 1 second, but memory data may loss
Manual:
Push the data logger button once will save data one time
Set the sampling time to 0 second
Manual mode, can also select the 1 to 99 position (Location) no.
Memory Card: SD memory card. 1 GB to 16 GB; It recommend use memory card ≤ 4 GB
Advanced setting:
Set clock time (Year/Month/Date, Hour/Minute/ Second)
Decimal point of SD card setting
Auto power OFF management
Set beep Sound ON/OFF
Set thermometer type to Type K or Type J
Set temperature unit to °C or °F
Set sampling time
SD memory card Format
Temperature compensation: Automatic temp. compensation for the Anemometer function and the type K/J thermometer
Data Hold: Freeze the display reading
Memory Recall: Maximum & Minimum value
Sampling Time of Display: Approx. 1 second
Data Output:
RS-232 serial interface capable of PC connection via USB with Aktakom ACE-1025 interface converter and wide data processing capabilities with ADLM-W software or ASDM and ASDL applications Windows and Android based respectively.
Operating Temperature: 0 to 50°C
Operating Humidity: Less than 85% R.H.
Power Supply:
Alkaline or heavy duty DC 1.5 V battery (UM3, AA) x 6 PCs, or equivalent
ADC 9V adapter input. (AC/DC power adapter is optional)
Power Current:
Normal operation (w/o SD card save data and LCD Backlight is OFF): Approx. DC 30 mA.
When SD card save the data and LCD Backlight is OFF): Approx. DC 50 mA.
Electrical Specifications (23±5°C):
Measurement
Range
Resolution
Accuracy
m/s
0.2 to 5.0
0.01
±(5% + a) reading or ±(1% + a) full scale
5.1 to 25.0 m/s
0.1 m/s
Km/h
0.70 to 18.00
0.01
18.0 to 72.0
0.1
Mile/h (mph)
0.50 to 11.20
0.01
11.2 to 44.7
0.1
Knot
0.40 to 9.70
0.01
9.7 to 38.8
0.1
Ft/min
40-3940 ft/min
1 Ft/min
a = 0.1m/s, 0.3km/h, 0.2mile/h, 0.2 knot, 20ft/min
Note:
m/s - meters per second
km/h - kilometers per hour
ft/min - feet per minute
knot - nautical miles per hour
mile/h - miles per hour (international knot)
Air temperature:
Measuring Range: 32°F to 122°F / 0°C to 50°C
Resolution: 0.1°F / 0.1°C
Accuracy: 1.5°F / ±0.8°C
Type K/J thermometer:
Sensor Type
Resolution
Range
Accuracy
Type K
0.1°C
-50.0 to 1300.0°C
± (0.4 % + 0.5°C )
-50.1 to -100.0°C
± (0.4 % + 1°C )
0.1°F
-58.0 to 2372.0°F
± (0.4 % + 1°F )
-58.1 to -148.0°F
± (0.4 % + 1.8°F )
Type J
0.1°C
-50.0 to 1200.0°C
± (0.4 % + 0.5°C )
-50.1 to -100.0°C
± (0.4 % + 1°C )
0.1°F
-58.0 to 2192.0°F
± (0.4 % + 1°F )
-58.1 to -148.0°F
± (0.4 % + 1.8°F )
Above specification tests under the environment RF Field Strength less than 3 V/M & frequency less than 30 MHz only
Dimensions:
Main instrument: 8x3x1.5in / 203x76x38mm
Telescope Probe :
Round, 0.5in / 12mm Dia x 11in / 280mm (min. length)
Round, 0.5in / 12mm Dia x 37in / 940mm (max. length)
Can I using Aktakom Data Logger Monitor (ADLM-W) software load all of the information from the memory card to plot a graph?
The environment meter records data to the memory card in *.xls format. All of the data can be copied to the PC after the measurement process.
Aktakom Data Logger Monitor (ADLM-W) software can be used for the measurement data transmission (using Aktakom ACE-1025 interface converter) that means for online monitoring only.
How to collect your recorder data using Datalogger memory card
Once you have finished to record your measurements with your Data Logger memory card just take off the card from your equipment and stick in to your computer. You'll be able to read the plain files using Microsoft Excel or any open source software.
SD card capacity: 1 GB to 16 GB available everywhere
ADLM-w software is designed for data reading from devices of AKTAKOM ATT, ATE series, for measurement data acquisition, its processing, displaying and storage in a PC with Windows XP x32, Windows 7 x64, Windows 7x32, Windows 8 x64, Windows Vista OS.
AKTAKOM ATE Easy Monitor software provides the numerical indication of 4 channel measurements as well as the data recording into file in CSV format. For the device connection the use of ACE-1025/ACE-1026 USB-RS232 interface converters is required.
ADLM-A software is designed for data reading from devices of AKTAKOM ATT, ATE series, for measurement data acquisition, its processing, displaying and storage in a tablet PC with Android OS of 4.0 and more advanced versions.
El AKTAKOM ATE-1034 es una combinación de cable conductor caliente y termistor estándar, el dispositivo realiza mediciones rápidas y precisas incluso a bajos valores de velocidad del viento.
Características:
Sonda delgada, ideal para rejillas y difusores
Velocidad del aire: m / s, ft / min, Km / h, nudos, millas / h
La temperatura del aire (° C, ° F)
El sensor del Termistor para la temperatura del aire es de respuesta rápida
Termómetro Tipo K, termopar tipo J
Registrador en tiempo real con memoria SD, incorpora Reloj y Calendario en tiempo real de registro de datos, el tiempo de muestreo regulable de 1 a 3600 segundos
Registrador manual de datos disponible (ajuste del tiempo de muestreo a 0), durante el uso de la función de registro de datos manual, puede ajustar la posición diferente (ubicación) N º (posición 1 a la posición 99)
Operación fácil, la computadora no necesita ningún software adicional, después de que el Registrador (datalogge) guarde, utilice sólo la tarjeta SD y conectela en el ordenador, puede descargar la totalidad del valor medido con la información de la hora (año / mes / día / hora / minuto / segundo) transferir a Excel directamente, el usuario puede hacer análisis gráfico con los datos por sí mismos
Capacidad de la tarjeta SD: 1 GB a 16 GB
Pantalla LCD con luz de fondo verde claro, de fácil lectura
Por defecto apagado automatico y tambien manual
Datos en pausa, grabacion de lecturas max. y min.
Circuito del microordenador, de alta precisión
Alimentación por UM3/AA (1,5 V) x 6 baterías o adaptador de 9V DC
Interfaz RS232/USB \
Sonda independiente, fácil para la operación
Medición de medio ambiente
Aplicaciones: pruebas ambientales, transportadores de aire, campanas de flujo, habitaciones limpias, velocidad del aire, balanceo de flujos de aire, ventiladores / motores / sopladores, velocidad del viento en horno, caja refrigerada, cabinas de pintura en aerosol
