AKTAKOM ACE-1045 RS-232-USB interface converter is used for debugging and repair of any systems, instruments and machine tools with numerical control which use the full set of RS-232 interface signals.
For connection to RS-232 interface they use the standard DB-25 connector with a complete (in accordance with RS-232 standard) set of controlling signals. The converter allows changing the commutation type of the RS-232 connector (null-modem cable / cross-cable) with the help of built-in jumpers. Therefore it is required to open the housing of DB-25-type connector.
The exchange rate and other interface parameters can be set arbitrarily in the emulator and stored in the non-volatile memory of the converter. Further on all installed RS-232 protocol settings are saved.
The length of the converter cable: 19.7 in / 50 cm.
The converter is powered from the USB interface.
AKTAKOM ACE-1045 RS-232-USB interface converter is used for debugging and repair of any systems, instruments and machine tools with numerical control which use the full set of RS-232 interface signals.
For connection to RS-232 interface they use the standard DB-25 connector with a complete (in accordance with RS-232 standard) set of controlling signals. The converter allows changing the commutation type of the RS-232 connector (null-modem cable / cross-cable) with the help of built-in jumpers. Therefore it is required to open the housing of DB-25-type connector.
The exchange rate and other interface parameters can be set arbitrarily in the emulator and stored in the non-volatile memory of the converter. Further on all installed RS-232 protocol settings are saved.
The length of the converter cable: 19.7 in / 50 cm.
The converter is powered from the USB interface.
Compatible with software:
El convertidor de interfaz AKTAKOM ACE-1045 RS-232-USB se utiliza para la depuración y reparación de cualquier sistema, instrumento y máquina herramienta con control numérico que utilice el conjunto completo de señales de interfaz RS-232.
Para la conexión a la interfaz RS-232, utilizan el conector estándar DB-25 con un conjunto completo (de acuerdo con el estándar RS-232) de señales de control. El convertidor permite cambiar el tipo de conmutación del conector RS-232 (cable de módem nulo / cable cruzado) con la ayuda de puentes integrados. Por lo tanto, es necesario abrir la carcasa del conector tipo DB-25.
El tipo de cambio y otros parámetros de la interfaz pueden establecerse arbitrariamente en el emulador y almacenarse en la memoria no volátil del convertidor. Más adelante se guardan todos los ajustes de protocolo RS-232 instalados.
La longitud del cable del convertidor: 19.7 in / 50 cm.
El convertidor se alimenta desde la interfaz USB.
