AM-1038 Application Software

AM-1038 Application Software
Click an image to enlarge
Compatible with: 

Free for registered users 

First install the driver and the application software in your computer, then start it. Once you have connected the USB cable between your DMM and your computer, press the HOLD key on your AM-1038 for two seconds and then release it, the meter will open the infrared interface for sending the measured data and status to the RS-232C interface of computer. Equipped with record and graphic software (options) the meter can display, record and describe the measured electric quantity on computer. As the data transmission between the meter and computer is depending on light coupling, so measurement of high voltage will not affect the safety of computer.

Any time you may choose time and sampling rate by clicking on a clock setup icone.

Once you finish your measurements you may save it and opening any time you want using the same AKTAKOM application software.

Select where to keep your files and the appropriate name.

Once you have saved your measurements you may reopen files for reviewing or printing any time.

By clicking on a graphic image at the top you may move right or left to review each record before printing.

By clicking on Print Graph boton you'll get a graphic printed in your default printer.

Or you may print a list of records of your interest. First choose records

Then the complete list in your default printer.

Standard package

The software in the standard package of the device has no physical media (CD) and can be downloaded at after the purchasing and registering the equipment with a serial number. This software is not free however its cost is included into device value.

We recommend you save a copy of your software. If lost: registered user can download software free of charge during warranty period. After warranty period has expired the software could be purchased and downloaded from the tmatlantic website. The software could be written on the CD and shipped to the customer for an additional fee and only upon request.

Frequently Asked Questions

  • There are problems when connecting AKTAKOM AM-1038 multimeter, what should be done?
  • Is it possible to operate several software copies of AM-1038 set simultaneously and independently on one PC?

  • There are problems when connecting AKTAKOM AM-1038 multimeter, what should be done?

    There can be several reasons and solutions accordingly:

    • Installation failure / wrong installation of the software
      Reinstall the program and the driver, restart the PC and reset the software once again;
    • Error has been caused by the operation system
      Try connecting the device to another PC, if it operates properly the problem is connected with your PC, if you see the same error the device requires service repair.
    • Wrong driver on the CD (the CD contains wrong optical cable driver)
      and install free USB to Serial Bridge Prolific PL-2303 converter driver. Afterwards optical cable from AM-1038 set should be successfully detected by the OS when connecting to USB.


    Is it possible to operate several software copies of AM-1038 set simultaneously and independently on one PC?

    Yes, it’s possible!

    AM-1038 software recognizes the device connection port automatically. If you connect several devices to different USB-ports of one PC (activating PC-Link mode on each of them by keeping HOLD button pressed), run a respective number of the Software copies and press START button one by one in each Software you will see an independent data collection of the appropriate device.

    The below screenshot demonstrates the example of simultaneous operation of 2 devices (one of them is in “µA” mode, the other one – in “mV” mode)


    RESERVADOS TODOS LOS DERECHOS. El software AKTAKOM™ está protegido por leyes y tratados internacionales y federales sobre derechos de autor. Se prohíbe cualquier copia, reimpresión o uso no autorizado de este material. Ninguna parte de este software puede ser reproducida o transmitida de ninguna forma o por ningún medio, electrónico o mecánico, incluyendo fotocopias, grabaciones o por cualquier sistema de almacenamiento y recuperación de información sin el permiso expreso por escrito del autor / editor.

    ALL RIGHTS RESERVED. AKTAKOM™ software is protected under International and Federal Copyright Laws and Treaties. Any unauthorized copy, reprint or use of this material is prohibited. No part of this software may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system without express written permission from the author / publisher.

    Back to the section
    Choose your clamp meter!
    Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024