ATE-2530 Infrared Thermometer with Laser Targeting

AKTAKOM ATE-2530 Infrared Thermometer with Laser Targeting
Click an image to enlarge
User's Manual:Download

Retail price:$69.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact
Sold out


AKTAKOM ATE-2530 infrared thermometer with Laser Targeting detects infrared energy emitted by objects, providing non-contact temperature measurement from a safe distance with high accuracy. ATE-2530 infrared (IR) thermometer (analog of VA6530) focuses energy through its lens, changing the temperature of a special material that creates an electrical signal. A microcomputer processes this signal and displays the output on the thermometer. The laser is used only for sighting the instrument and has no other effect on temperature measurement.


  • Laser-On Indicator
  • Holding indicator
  • The first temperature display
  • Low power indicator
  • Average value indicator
  • MAX/MIN indicator
  • The second temperature display
  • F temperature unit
  • C temperature unit
  • Emissivity display
  • Measurement indicator

Temperature-20...537 C / -4...999 F
Temperature sensor typeIR


  • LCD Display: 2-temperature, 4 digits
  • Distance to Spot Ratio: 12:1
  • Emissivity: Fixed at 0.95
  • Spectral Response: 8-14μm
  • Measurement Range: -20C ~ 537C / -4F ~ 999F
  • Alarming temperature range (ATE-2533): 30C ~ 535 C / 86F ~ 995F
  • Accuracy: -20C ~ 50C: 2.5C; 50C ~ 537C: (reading x1%+1C)
  • Response Time: 1.5 seconds
  • Laser Power: Less than 1 mW
  • Auto-off: After 10 seconds
  • Backlight: White
  • Operating Environment: 0~ 40C, 10~90%RH
  • Storage Environment: -10C ~ 60C, <75%RH
  • Battery: 9Volt, 6F22
  • Dimensions: 162mm (L) x 56mm (W) x 190mm (H)

Included accessories

  • 9V battery
  • User manual
  • Carrying bag

El termmetro de infrarrojos de gran alcance AKTAKOM ATE-2530 con enfoque lser detecta la energa infrarroja emitida por los objetos. El instrumento enfoca la energa a travs de su lente, cambiando la temperatura de un material especial que crea una seal elctrica. Un microordenador procesa esta seal y muestra la salida en el termmetro. El lser se usa solo para observar el instrumento y no tiene ningn otro efecto en la medicin de la temperatura.

  • Indicador lser encendido
  • Indicador de espera
  • La primera pantalla de temperatura
  • Indicador de baja potencia
  • Indicador de valor promedio
  • Indicador MAX / MIN
  • La segunda pantalla de temperatura.
  • Unidad de temperatura F
  • unidad de temperatura C
  • Pantalla de emisividad
  • Indicador de medida

Back to the section
AKTAKOM - the Best in Test Award Winner!
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2023