Industry news

RSS

Rohde & Schwarz first to bring 1 GHz analysis bandwidth to a mid-range signal and spectrum analyzer – ideal for 5G NR
12/04/2020 | 5
Manufacturers of future cellular and wireless systems, infrastructure and amplifiers can now profit from a wideband signal test solution that was previously available only in high-end instruments. Rohde & Schwarz has added an unparalleled internal analysis bandwidth of up to 1 GHz to its R&S FSVA3000 mid-range signal and spectrum analyzer. The new R&S FSV3-B1000 hardware option is available for all models from 7.5 GHz to 44 GHz, while comparable solutions offer just 160 MHz analysis bandwidth.

Keysight Technologies and ROHM Semiconductor enable designers to rapidly modify SMPS Reference Design for SiC Power Devices
12/01/2020 | 13
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, and ROHM Semiconductor, a leading semiconductor company, jointly announce a PathWave Advanced Design System (ADS)-compatible workspace that enables designers to perform pre-compliance testing on virtual prototypes of switched-mode power supply (SMPS) designs. This new capability saves time and cost by catching errors early in the design before they become a big problem.

Rohde & Schwarz and VIAVI cooperate to advance their 5G NR test coverage
11/27/2020 | 21
5G NR uses a combination of various features, functions and complex algorithms, making it vital for UE manufacturers to perform extensive testing of 5G mobile devices before bringing them to the market. The thorough validation of the standardized coexistence methodology is key to the success of 5G technology.

Yokogawa released DLM5000 series mixed signal oscilloscopes
11/24/2020 | 31
Yokogawa Test & Measurement Corporation announced new DLM5000 series mixed signal oscilloscopes (350 MHz and 500 MHz models). The new DLM5000 oscilloscopes are successors to the eight-channel DLM4000 series mixed signal oscilloscopes, and feature a number of improved functions and enhanced operability. In addition, a DLMsync option is planned to be released by next spring that will enable measurements to be taken simultaneously by two connected DLM5000 oscilloscopes.

Anritsu adds PCIe® 6.0 support to Signal Quality Analyzer-R MP1900A
11/20/2020 | 35
Anritsu Company enhances its Signal Quality Analyzer-R MP1900A BERT with expanded PCI Express® (PCIe) receiver test capability to support emerging PCIe 6.0 designs using PAM4 32-Gbaud technology. With the upgraded high-quality waveform performance of the PAM4 pulse pattern generator (PPG) MU196020A, the MP1900A can conduct PCIe receiver tests on high-end servers, high-performance computers, 400 GbE communications equipment, and other products, according to the latest high-speed, large-capacity PCIe standards.

Keysight works with Qualcomm Technologies and SGS to advance testing of cellular vehicle-to-everything technology
11/17/2020 | 40
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced that the company is working with Qualcomm Technologies, Inc. and SGS to help advance testing of cellular vehicle-to-everything (C-V2X) technology.

Rohde & Schwarz raises the bar in low power VHF transmitters with R&S TLV9
11/13/2020 | 45
Rohde & Schwarz will further extend its portfolio of low power VHF transmitters with the introduction of the R&S TLV9. The new model is designed to operate in the VHF band III with an output power of 50 to 300 W from a single 2U box. It has been developed for applications spanning DAB+ and digital TV standards in VHF band III.

Tektronix introduces S530 Series Parametric Test System with KTE 7 software to support wide bandgap (WBG) fabrication
11/10/2020 | 43
Tektronix, Inc. released the new Keithley S530 Series Parametric Test System with KTE 7 software and other enhancements. The S530 platform enables semiconductor fabs to add parametric test capacity for high-growth new technologies while minimizing CAPEX investment and maximizing wafers per hour efficiency. This reduced overall cost of ownership profile helps manufactures meet aggressive price pressures in competitive new markets.

Keysight delivers first 256 GSa/s arbitrary waveform generator with 65 GHz analog bandwidth
11/06/2020 | 41
Keysight Technologies, Inc. announced the first 256 GSa/s arbitrary waveform generator (AWG) – Keysight's M8199A - with 65 GHz analog bandwidth in a compact 2-slot AXIe module.

Anritsu enhances MT8000A/SmartStudio NR Solution to support 5G SA mode EPS Fallback Testing
11/03/2020 | 41
Anritsu Company enhances its SmartStudio NR (SSNR) MX800070A control software to support 5G-device Evolved Packet System (EPS) Fallback tests using the Radio Communication Test Station MT8000A. With the new EPS Fallback functionality, the MT8000A/SSNR environment dramatically simplifies evaluation and reduces cost-of-test when verifying 5G New Radio (NR) UE being developed for emerging applications.


News 1 - 10 of 1032
First | Prev. | 1 2 3 4 5 | Next | Last All

Also visit:

 

Please give us your feedback to help us improve our website

* - required fields

Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2020