Accessories

BNC male adapter connector. 2 jacks: 0.2in / 4mm. 2 branch jacks: 0.2in / 4mm (for parallel connection or additional cables). Plug length: 0.6in /15mm. Distance between the plugs: 0.8in / 19mm. BNC plug length: 0.7 in / 17 mm. Shell length: 1.02 in / 26 mm

Shunt adapter. 2 banana plugs on one side and 1 jack of 0.2in / 4mm (depth: 0.4in / 11mm) on the other side. Plug diameter: 0.2in / 4mm. Distance between the plugs: 0.8in / 19mm. Plug length: 0.8in / 19mm. Shell length: 1in / 25mm

Measuring cable with a banana tip of 4mm diameter and through branch slot for parallel connection. For work with high-current installations. Supplied in sets, each set consists of 2 pcs.

Measuring cable with a tip of 4mm diameter and through branch slot for parallel connection. Supplied in sets, each set consists of 2 pcs.

Connecting cable with 2 banana plugs with spring-loaded rotating tips. It’s used for grounding, as connecting wires to any measuring devices with a connector of 4mm diameter. Supplied in sets, each set consists of 2 pcs.

Crocodile clip (small). One side is equipped with a double insulated socket of 4mm diameter, on the other side – crocodile clip. Covered with a plastic insulation to be more secured. Supplied in sets, each set consists of 2 pcs.

Coaxial test lead, BNC-clips. Wave resistance: 50Ω. Resistance: 60 mΩ. Recommended frequency range: 100 MHz. Length: 45.7in / 116 cm. Max. voltage: 30V AC, 60V DC. Max. current: 3A.

BNC-BNC measuring coaxial cable. Wave impedance: 50Ω. Recommended frequency range is 500MHz. Length: 93cm.

BNC-BNC measuring coaxial cable with protected plastic connectors. Wave impedance: 50Ω. Recommended frequency range is 500MHz. Length: 39.4in / 1m.