ACK-3117 four-channel USB PC-based oscilloscope with galvanic isolation

AKTAKOM ACK-3117 four-channel digital storage USB oscilloscope. This is a PC-based unit which is connected to a computer (PC) via USB-port or LPT parallel port. This model is used for a wide range of oscilloscope measurements and allows user to view waveforms using 4 independent channels with 8 bit resolution and sensitivity from 2 mV/div to 10 V/div at the bandwidth from 0 up to 100 MHz. Input resistance is 1 MΩ or 50 Ω.

This USB oscilloscope has a standard triggering system operable in “waiting”, “single” and “auto” modes with regulated trigger level.

Horizontal sweep varies in the wide range and corresponds to 3 main modes of a USB oscilloscope:

• real-time mode (sweep range: from 500 ns/div up to 50 ms/div; sample rate: up to 100 MHz)
• stroboscopic mode (sweep range: from 25 ns/div up to 200 ns/div; equivalent sample rate: up to 2 GHz)
• recorder (paperless, sweep range: 500µs/div up to 50 h/div, sample rate: up to 50 kHz depending on the PC used)

Interface	USB, LPT
Power supply	+6.5 V with a network adapter
Dimensions	8.3 x 2.8 x 10.3 in / 210 x 70 x 260 mm

Specifications:

• Sampling: up to 100 MHz (real-time mode)
• 4 independent channels with the bandwidth of up to 100 MHz per channel
• Record length: up to 132 kB per channel (selected by user)
• Arbitrary selectable pre record/after record length
• High sensitivity (from 2 mV/div)
• Input resistance: 1 MΩ or 50 Ω
• Interface: USB 1.1
• Record mode (paperless)
• Alarm signaling
• Sweep/triggering auto set button
• Automatic measurements including phase angle determination
• Statistic measurement and histogram construction
• Spectrum analyzer (FFT)
• Digital afterglow
• Digital filtering
• Program emulation of the input signal
• Data save as MS Excel maintaining the scales along the oscillogram axes
• Resolution: 8 bit
• Power supply: +6.5 V with a network adapter
• Dimensions: 8.3 x 2.8 x 10.3 in / 210 x 70 x 260 mm
• Weight: 2.1 lb / 0.96 kg

Galvanic isolation:

• Max. acceptable pulse amplitude between the input and output of galvanic isolation (via USB interface): not more than 1000 V.
• Rate of rise: not exceeding 5000 V/µs
• Repetition frequency: not more than 100 Hz

Embedded generator:

• Output socket: BNC matched with external triggering input
• Output impedance: about 150 Ω
• Input signal: square with duty factor 2
• Output signal frequency: 1 kHz
• Output voltage: about 3.5V peak-to-peak

Accessories:

• Cable
• Brief instruction
• Network adapter

Optional accessories:

• HP-9150 oscilloscope probe
• HP-9258 oscilloscope probe
• BNC cable PTL922, PTL923, PTL924

AKTAKOM File Converter (AULFConverter)

AKTAKOM File Converter (AULFConverter) is an utility to convert AKTAKOM data file format used in AKTAKOM applications including APM to other formats such as CSV and WAV.

Learn more...

Free for registered users

Download
(5.75 Mb)
Product registration required

AKTAKOM Web Server (AULWebServer)

AULWebServer is a web interface based application (TCP/IP protocols). It allows remote control of an AKTAKOM instrument over the local area network (LAN).

Learn more...

Free for registered users

Download
(26.31 Mb)
Product registration required