AKTAKOM APS-7303L programmable remote controlled (USB or LAN) DC power supply provides a great protection capability and can protect a user’s device from getting burnt/damaged. AKTAKOM APS-7303L is designed for industrial, laboratory and other engineering solutions. Includes Aktakom Power Manager Software for Windows (including Windows 10). Available software development kit (SDK) for LabVIEW, C++, LabWindows-CVI and MS VB is designed to help users in developing their own applications for AKTAKOM power supplies.
AKTAKOM APS-73xxL series are programmable DC power supplies with 3 LED displays. There is a single channel, output regulated voltage of 0…30 V, output current of 0…3 A (APS-7303L) or 0…5 A (APS-7305L), overheat protection, current and voltage stabilization mode.
AKTAKOM APS-73xxL series programmable DC power supplies differ from other similar devices by wide capabilities of local and remote control through AKTAKOM Power Manager software.
APS-73xxL power supplies are capable of operating in several modes:
Manual control mode. Including the use of 4 memory cells to store preset voltage and current.
Control mode with the built-in memory use.
Remote control mode to operate AKTAKOM APS-7303L DC power supply by computer via USB interface through AKTAKOM Power Manager Software. Moreover the USB interface has full galvanic isolation between the power supply and the computer.
Remote control mode to operate AKTAKOM APS-7303L programmable power supply by computer using an USB cable or LAN cable (ethernet).
Remote control mode to operate AKTAKOM APS-7303L DC power supply by computer via WEB interface. This remote control mode allows you to operate a power supply remotely not only by computer but through iPad, iPhone or any other Android-based mobile device.
Remote control mode to operate AKTAKOM APS-7303L programmable DC power supply throught the remote access to the computer USB-connected to APS-7303L. AKTAKOM Power Manager Software provides the operation in «server-client» mode even for power supplies without built-in LAN interface. Meanwhile the power supply is physically connected to computer-server via USB interface and the data is available for reading from any computer of the network.
AKTAKOM Power Manager Software (APM) provides a wide range of control capabilities of output voltage and stabilization current both in manual and functional modes. Functional control is a very powerful tool of APM software which allows you not only to control your programmable power supply automatically by computer but also to program its off-line operation mode by prespecified algorithm. Functional control mode in APM allows automatically controlling the output parameters (voltage and current) of the power supply according to the principle specified with the help of graphics and tabular editors. In a convenient graphics editor user may specify 10 standard forms of parameters (including sine, square, triangle, saw, flash, pulse, 2 types of exponents, 2 types of S-curves), as well as, almost any arbitrary form which can be described formulary. The program operation in equipment operation compatibility mode is also available.
The software system for AKTAKOM APS-7303L programmable power supply includes a software development kit (SDK) which contains an instrument driver for AKTAKOM APS-73xxL series remote controllable power supplies. This driver contains all necessary functions to operate the power supply and represents Windows dynamic link library (DLL) accompanied with a header file for C language, LabWindows function tree and a tool library for NI LabVIEW which completely repeats this tree. Driver library functions can be also called from any other programming environment by the method common for DLL.
The most economical programmable regulated power supply
High stability. Low Drift (<300ppm)
Offers lots of complex testing capabilities through computer controlling
Switching on or off the output
Low Ripple and Noise
Over-voltage, over-current, over temperature protection
AKTAKOM Power Manager (APM) Software offers wide opportunities for controlling the output voltage and stabilization current both in arbitrary (manual) and in functional modes. Functional control is a powerful APM software tool which allows you not only to automatically control the power supply via your computer but also to program it for the off-line mode operation in accordance with the predetermined algorithm. Functional control mode in APM software allows you to automatically control the output parameters (voltage or current) of the power supply according to the law set by the graphical and tabular editors. In the convenient graphical editor user may set 10 standard forms of parameter changes (including: sine, square, triangle, saw, flash, pulse, 2 types of exponent, 2 types of S-curves) as well as any arbitrary shape which can be described with a formula.
Please note! When you run AKTAKOM Power Manager Software for the first time it will require an access key. This key can be received (copied) at www.tmatlantic.com after the product registration. The key can be entered later, see Settings/Pass key menu.
May I use AKTAKOM power supplies to charge accumulators?
AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.
How to install the device driver for the operation via USB?
Device USB driver can be installed in several stages.
At the first stage files necessary for the driver installation should be copied to the PC hard disk. It happens during APM program installation. At this moment the device shouldn’t be connected to the PC USB port.
When the installation is completed the installer will suggest connecting the device via USB, afterwards it will start installing the copied driver files into the operating system.
If you missed this stage or for some reason driver auto installation failed you may install the driver manually in an ordinary way for Windows any time in the future. In this case connect the device to your PC, wait for Add New Hardware Wizard and specify the path to the driver files on the installation disk or in the working folder of the installed program, for example: «C:\Program Files (x86)\AKTAKOM\AKTAKOM Power Manager\Driver». Up
How to see MAC address of a power supply with network management?
As for any other network device MAC address (Media Access Control, a device physical address in the network) can be determined by standard means of the operating system such as getmac, nbtstat, ping and arp.
But for a device connected via network to APM program there is a method much simpler. Open “About the program…” (in Help menu) and read the device MAC address in «HW MAC» line.
There can be two ways of connection: via USB interface or via LAN interface (TCP/IP protocol).
1) Connection via USB
Open Settings window (in Settings main window – Settings panel or just Ctrl+O keys). Go to Connection and Presets tab. Select the right device type you need in the list of models and click “Detect”:
After the scanning select the device you need in the list of detected devices and click “Connect”:
Now the device is connected to the program and ready for further operation.
2) TCP/IP connection
Network connection requires one prior stage: the device socket should be added.
In Settings window go to Network Sockets, enter the device IP-address into Name column in accordance with its network settings. Check Port and Login columns, they should correspond with the device settings as well. Click “Add”:
A line with the device network settings will be added to the network sockets list.
Afterwards do the steps similar to the connection via USB.
How to see a device serial number in AKTAKOM Power Manager software?
The program automatically reads the serial numbers of all devices found. To detect the device open Settings window, go to Connection and Presets tab, select the right device type you need in the list of models and click “Detect”:
In the list of detected devices you will see all names and serial numbers of the devices found.
After you select one of the detected devices and connect it to the program its serial number will be displayed in the program main window title. Up
Video can't watch in explorer 9
For a quick fix, go to explorer tools and tick Compativility View.
For a permanent solution go to Compatibility View settings and add the site to a current list.
AKTAKOM Net Configurator is designed to record and read the network settings data of AKTAKOM Universal Lab devices (supporting AULNet protocol). The application provides simple and convenient user interface to work with settings, they can be recorded into the file and read afterwards.
AUNLibUSB device driver for Windows supports AKTAKOM USB Lab instruments (PC-based oscilloscopes and other). AUNLibUSB driver is a low-level program which does not communicate with user directly neither has user interface. After its installation in the operating system the driver starts working as a part of this operating system and supplies applications with the access to the resource of AKTAKOM supported devices and appropriate programs.
APS-730xL SDK (Software Development Kit) for APS-7303L & APS-7305L
The SDK library provide all you need for programming in different enviroments and example projects for Borland C++ Builder 6, NI LabWindows/CVI and MS Visual C++ and more. It contains all necessary functions to operate a device and Wndows dynamic link library (DLL) followed by C header file, LabWindows function tree and a complete tools library for LabVIEW. Also a manual contains APS-730xL programming examples for LabWindows and LabVIEW in different modes.