Depending on a destination shipping cost may vary. Free shipping for orders over $450 on items weighting under 20 lbs (certain restrictions apply!) See shipping page for international rates or contact sales@tmatlantic.comIn stock, 2 left
AME-8821-05 is a non-invasive AC sensor (5A max), there is a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control.
Specifications:
Max. current: 5A
Capture parameter: 0.5 in x 0.5 in / 13 mm x 13 mm
Lead wire length: 4.9 ft / 1.5 m
Ø3.5, three-pin
Output type: voltage (built-in low-value resistor)
Core material: ferrite
Mechanical strength: no less than 1000 times closing (test temperature: 68°F / 20°С)
Dielectric strength (between the shell and output): 5000 V AC/1 min.
Operating temperature: -13°F +158°F / -25°C +70°C
AME-8821-05 es un sensor de CA no invasivo (5A mбx.), Se utiliza un transformador de corriente con un nъcleo de ferrita dividido. Se recomienda usarlo para el monitoreo de mediciуn de corriente, asн como para el control de eficiencia energйtica.