Depending on a destination shipping cost may vary. Free shipping for orders over $450 on items weighting under 20 lbs (certain restrictions apply!) See shipping page for international rates or contact sales@tmatlantic.comIn stock
AKTAKOM ATT-9002 Vibration meter measuring procedure
Plug in BNC plug of cable to the meter socket accordingly.
Plug in Mini plug of cable to the input socket of the vibration sensor
For the acceleration measurement change Acceleration/Velocity switch to the "ACC" position.
For the velocity measurement change Acceleration/Velocity switch to "VEL" position.
Change RMS/PEAK switch to "RMS" position.
Power on the meter pushing Power button.
If the surface of the item under measurement is not made of ferrous material, hold the vibration sensor by hand and touch the sensor to the surface of this item.
If the surface of the item under measurement is made of ferrous material, connect the vibration sensor to the Magnetic base. Put the whole unit (Vibration sensor and Magnetic base) to the surface of the item under measurement.
Peak value measurement with AKTAKOM ATT-9002
Before the measurement change RMS/PEAK switch to "PEAK" position. Then during the measurement, the LCD will display the peak value.
Data Record (Max., Min. reading) with AKTAKOM ATT-9002 Vibration meter
Data record function displays max/min and average values. To launch data record function, press Record button. You will see "REC" symbol on the LCD.
When there is "REC" symbol on the display:
- Press Recall button, you will see "Max" symbol along with the maximum value on the display.
- Press Recall button again, you will see "Min" symbol along with the minimum value.
- To exit the memory record function press Record button once again. The display will revert to the current reading.
What other capabilities does AKTAKOM ATT-9002 Vibration meter has?
ATT-9002 has a built-in auto switch off function that saves the battery life. In case there are no buttons pressed for about 10 minutes the device will be switched off automatically.
To deactivate this function select memory record function during the measurement process by pressing Record button.
AKTAKOM ATE Easy Monitor software provides the numerical indication of 4 channel measurements as well as the data recording into file in CSV format. For the device connection the use of ACE-1025/ACE-1026 USB-RS232 interface converters is required.
ADLM-A software is designed for data reading from devices of AKTAKOM ATT, ATE series, for measurement data acquisition, its processing, displaying and storage in a tablet PC with Android OS of 4.0 and more advanced versions.
ADLM-w software is designed for data reading from devices of AKTAKOM ATT, ATE series, for measurement data acquisition, its processing, displaying and storage in a PC with Windows XP x32, Windows 7 x64, Windows 7x32, Windows 8 x64, Windows Vista OS.
AKTAKOM ATT-9002 es un medidor de vibración portátil que está diseñado para medir la respuesta desequilibrada de los mecanismos.
caracteristicas:
• Aplicaciones para monitoreo de vibraciones industriales.
• Rango de frecuencia: 10 Hz - 1 kHz
• Rango de medición de velocidad: 200 mm / s
• Rango de medición de la aceleración: 200 m / s2
• RMS y medición de picos
• Amplio rango de frecuencia: 10 Hz ... 5 kHz
• Tasa de medición: 1 seg. aprox.
• Botón de retención de datos para mantener el valor requerido
• Memoria para grabar máx. y min. lecturas
• Sonda de vibración, fácil manejo.
• Interfaz RS 232.
• Pantalla LCD grande
• Circuito microordenador, alto rendimiento.
• El apagado automático ahorra la vida de la batería
• Indicador de batería baja incorporado