AM-7113 Multifunction Calibrator

1. Source 4~20 mA loop Current
2. Simulate 4~20 mA transmitter
3. Simulate electronic load (Max. 30V, 20mA)
4. Test LED brightness (0~24mA)
5. Source 0~70mV and 0~15V
6. Calibrate temperature with selection of 11 types of thermocouples
7. Source frequency (0.3 to 20kHz) of many waveforms
8. Source: mA, V, Hz, sine wave, square wave, triangular wave, truncated sine wave, user programmable waveform and temperature.
9. Generate arbitrary waveform
10. Generate single pulse (3µs to 999.99ms)
11. Map 4~20 mA into engineering units
12. Measure: Current (mA), Voltage (mV, V), and temperature (°C, °F)
13. Measure 4~20 mA with 24V loop supply simultaneously
14. Selectable 250Ω HART resistor to facilitate use with HART communication device
15. Programmable cold junction compensation for temperature measurement
16. Auto step and auto ramp for sourcing mA, V, and temperature
17. Dot matrix LCD with backlight
18. Rechargeable lithium battery (1600mAh)
19. Data logging function for source and measurement
20. Program calibrator through PC USB port
21. Programmable 0% and 100% value for easy 25% step function
22. DTMF (Dual Tone Multi-Frequency) can perform professional testing for telephone line and audio product (MP3 or MD)

DC Voltage (DCV)	15 V
DC Current (DCA)	24 mA

Source 4~20 mA loop Current - Simulate 4~20 mA transmitter - Simulate electronic load (Max. 30V, 20mA) - Test LED brightness (0~24mA) - Source 0~70mV and 0~15V - Calibrate temperature with selection of 11 types of thermocouples - Source frequency (0.3 to 20KHz) of many waveforms - Source: mA, V, Hz, sine wave, square wave, triangular wave, truncated sine wave, user programmable waveform and temperature. - Generate arbitrary waveform - Generate single pulse (3µS to 999.99mS) - Map 4~20 mA into engineering units - Measure: Current (mA), Voltage (mV, V), and temperature (°C, °F) - Measure 4~20 mA with 24V loop supply simultaneously - Selectable 250O HART resistor to facilitate use with HART communication device - Programmable cold junction compensation for temperature measurement - Auto step and auto ramp for sourcing mA, V, and temperature - Dot matrix LCD with backlight - Rechargeable lithium battery (1600mAh) - Data logging function for source and measurement 20. Program calibrator through PC USB port 21. Programmable 0% and 100% value for easy 25% step function. DTMF (Dual Tone Multi-Frequency) can perform professional testing for telephone line and audio product (MP3 or MD)