|
APS-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel
APS-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel
AKTAKOM APS-3333 Power supply with digital indication is designed for the use in debugging process, repair or in laboratory research.
APS-3333 power supply (analog of QJ3003EIII) outputs smoothly regulated stabilized DC Voltage up to 30V and stabilized current up to 3A.
- 3 digit LCDs – 4 pcs
- Short circuit protection
- Stabilization mode (current, voltage)
| Channels | 3 |
| Output voltage (V) | 30 |
| Output voltage accuracy | ±(1% + 2 digits) |
| Output voltage display resolution | 0.1 V |
| Output current (A) | 3 |
| Output current accuracy | ±(2% + 2 digits) |
| Output current display resolution | 0.01 A |
| Output power | 195 W |
| Ripple and Noise | 10 mV |
| Series working method | 0...60 V / 0...3 A |
| Parallel working method | 0...30 V / 0...6 A |
| Display | 4 3-digit LCDs |
| Power supply | 110 V / 220 V |
| Dimensions | 15.2 x 10.5 x 6.5 in / 385 x 268 x 164 mm |
Specifications
- Number of channels: 3
- Output voltage (channel 1 and 2): 0...30 V x 2
- Output current (channel 1 and 2): 0…3 A x 2
- Output voltage/current (channel 3): 5V / 3A
- Inaccuracy of output voltage setting: 1% + 2 digits
- Inaccuracy of output current setting: 2% + 2 digits
- Voltage ripple and noise, RMS (typical): 10mV
- Current ripple and noise, RMS (typical): 2mA
- Power supply: 110V/220V
- Dimensions: 15.2 x 10.5 x 6.5 in / 385 x 268 x 164 mm
- Weight: 22.1 lb / 10.5 kg.
Frequently Asked Questions
May I use AKTAKOM power supplies to charge accumulators?
May I use AKTAKOM power supplies to charge accumulators?
|
|
AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.
Up
|
AKTAKOM APS-3333 La fuente de alimentación con indicación digital está diseñada para su uso en el proceso de depuración, reparación o investigación de laboratorio.
Las salidas de la fuente de alimentación APS-3333 regulan sin problemas el voltaje de CC estabilizado hasta 30 V y la corriente estabilizada hasta 3A.
- LCD de 3 dígitos - 4 piezas
- Protección contra cortocircuitos
- Modo de estabilización (corriente, tension)
Back to the section
|
|
|
|
