APS-1233 DC Power Supply 30V / 30A, 1 channel

AKTAKOM APS-1233 DC Power Supply 30V / 30A, 1 channel
Click an image to enlarge

Retail price : $615.00

Depending on a destination shipping cost may vary.
See shipping page for international rates
or contact sales@tmatlantic.com

Sold out


AKTAKOM APS-1233 is a high-precision regulated DC power supply which is widely used in debugging process, repair and laboratory research. Besides other applications it’s a perfect power supply for science investigation, college, factory, electronic appliance maintenance and etc.

AKTAKOM APS-1233 single channel bench power supply (analog of M10-QS3030) outputs smoothly adjustable stabilized DC voltage and stabilized current. Constant voltage and constant current are switchable automatically and the current limit protection point can be set arbitrarily. In the constant current mode, output current is continuously adjustable.


  • 3 digit LCD
  • Short circuit protection
  • Stabilization mode (current, voltage)
  • Additional USB 5V/2A output to charge mobile devices

Output voltage (V)30
Output voltage accuracy±(0.5% + 200 mV)
Output voltage display resolution0.01 V
Output current (A)30
Output current accuracy±(1% + 20 mA)
Output current display resolution0.01 A
Ripple and Noise10 mV
Display2 LED displays
Power supply110 V / 220 V
Dimensions12.4 x 10 x 6.1 in / 315 x 255 x 155 mm


  • Number of channels: 1
  • Output voltage: 0...30 V
  • Output current: 0...30 A
  • Inaccuracy of output voltage setting: 0.2% + 2 digits
  • Inaccuracy of output current setting: 1% + 2 digits
  • Voltage ripple and noise, RMS (typical): 10mV
  • Power supply: 110V/220V
  • Dimensions: 12.4 x 10 x 6.1 in / 315 x 255 x 155 mm
  • Weight: 46.3 lb / 21 kg

Standard accessories

  • Power cord
  • User manual

Frequently Asked Questions

  • May I use AKTAKOM power supplies to charge accumulators?

  • May I use AKTAKOM power supplies to charge accumulators?

    AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.


    AKTAKOM APS-1233 es una fuente de alimentaciуn regulada por CC de alta precisiуn que se usa ampliamente en el proceso de depuraciуn, reparaciуn e investigaciуn de laboratorio. Ademбs de otras aplicaciones, es una fuente de alimentaciуn perfecta para investigaciуn cientнfica, universidad, fбbrica, mantenimiento de aparatos electrуnicos, etc.

    APS-1233 emite una tensiуn de CC estabilizada suavemente ajustable y una corriente estabilizada. El voltaje constante y la corriente constante son conmutables automбticamente y el punto de protecciуn del lнmite de corriente puede establecerse arbitrariamente. En el estado actual constante, la corriente de salida es continuamente ajustable.

    La estructura de la unidad es bastante compacta, esto permite que el APS-1233 ocupe un espacio mнnimo y organice un бrea de trabajo de alto rendimiento. Otras caracterнsticas de esta fuente de alimentaciуn incluyen alto rendimiento, disponibilidad de protecciуn contra cortocircuitos, diseсo moderno, etc.


    • LCD de 3 dнgitos
    • Protecciуn contra cortocircuitos
    • Modo de estabilizaciуn (corriente, tension)

    Back to the section
    Choose your clamp meter!
    Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2022