PA-699 Current Probe

 PA-699 Current Probe
Click an image to enlarge

Retail price : $999.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

In stock, 2 left

Buy Add to cart

The PA-699 current probe enables a general purpose oscilloscope to display AC and DC current signals up to 40 A Peak (28A RMS). The PA-699 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory (BNC-to-banana) plug adapter.

Features

  • High sensitivity of 1mA
  • Wide AC bandwidth up to 1MHz
  • Low noise (about 1/3 lower than competitors)
  • Dual power: AC adaptor for indoor, batteries for outdoor applications
  • Detachable output wire — convenient for packing, storing and self examination for any damages

Specifications

Max. DC A Current ± 40A DC
Max. AC A Peak 80A p-p
Max. AC A RMS 28A rms
Range Selection
Division
2 Range
0.1V/A;1V/A
Max. Sensitivity 1mA
DC Accuracy Typical ±3% ±10mA at 1/A
(100 mA to 80A peak range)
±4% ±100mA at 0.1V/A
(100mA to 80A peak range)
Frequency Range DC to 1.5MHz (-3dB)
Rise Time 0.23μs (Typ.)
Battery Type and Life, typical 9V NEDA 1604A, IEC 6LR61
4 hours minimum (1 each)
Max. Working Voltage
Max Floating Voltage
600V CAT III
600V CAT II
Cable Length 100 cm (3.3 feet)
Maximum Conductor Size 11 mm (0.43 inch)
Weight 260 g (9.5 oz) (without battery)
  • An Insulated BNC/BNC lead, length 100cm
  • AC Adapter
  • Connector BNC to Banana
  • Instruction Manual

Back to the section
 
AKTAKOM - the Best in Test Award Winner!
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2021