ATH-2335 DC Power Supply 30V / 5A, 2 channels

AKTAKOM ATH-2335 DC Power Supply 30V / 5A, 2 channels
Click an image to enlarge
Brand:AKTAKOM

Perfect power supply to use when repairing or adjusting electronic equipment as well as for the use in research laboratories. 30V, 5A. 2 channels

Retail price :$229.00

Depending on a destination shipping cost may vary.
See shipping page for international rates
or contact sales@tmatlantic.com

In stock, 3 left

BuyAdd to cart

AKTAKOM ATH-2335 laboratory DC power supply outputs smoothly regulated stabilized voltage and current. Due to its precise setting capabilities of the output parameters and affordable price ATH-2335 is considered a perfect power supply to use when repairing or adjusting electronic equipment as well as for the use in research laboratories.

Features:

  • 4 3-digit LCDs
  • Short circuit protection
  • Current and voltage stabilization mode

Channels2
Output voltage (V)30
Output voltage accuracy(1% + 2 digits)
Output voltage display resolution0.1 V
Output current (A)5
Output current accuracy(2% + 2 digits)
Output current display resolution0.01 A
Ripple and Noise1 mV
Load stability(0.01% + 5 mV)
Series working method0...60 V / 0...5 A
Parallel working method0...30 V / 0...10 A
Display4 3-digit LCDs
Power supply110 V / 220 V
Dimensions8.1 x 6.02 x 4.3 in / 206 x 153 x 110 mm

Specifications:

  • Channels: 2
  • Output voltage: 0...30 V x 2
  • Output current: 0...5 A x 2
  • Setting error of the output voltage: 1% + 2 dgt
  • Setting error of the output current: 2% + 2 dgt
  • Voltage ripple and noise (rms), typical: 1 mV
  • Current ripple and noise (rms), typical: 2 mA
  • Dimensions: 8.1 x 6.02 x 4.3 in / 206 x 153 x 110 mm
  • Weight: 26.5 lb / 12 kg

Frequently Asked Questions

  • May I use AKTAKOM power supplies to charge accumulators?

  • May I use AKTAKOM power supplies to charge accumulators?

    AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.


    Up

    La fuente de alimentacin CC de laboratorio AKTAKOM ATH-2335 produce un voltaje y una corriente estabilizados regulados sin problemas. Debido a sus capacidades de configuracin precisas de los parmetros de salida y precio asequible, el ATH-2335 se considera una fuente de alimentacin perfecta para usar al reparar o ajustar equipos electrnicos, as como para el uso en laboratorios de investigacin.

    caracteristicas:


    4 LCD de 3 dgitos
    Proteccin contra cortocircuitos
    Modo de estabilizacin de corriente y tension.


    Back to the section

    Please give us your feedback to help us improve our website

    * - required fields

    Choose your clamp meter!
    Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2020