ATH-3243 DC Power Supply 40V/3A (2 adjustable channels), 5V/3A (1 fixed channel)

AKTAKOM ATH-3243 DC Power Supply 40V/3A (2 adjustable channels), 5V/3A (1 fixed channel)
Click an image to enlarge

High-precision DC regulated power supply with its continuously adjustable voltage output. Widely used in debugging process, repair and laboratory research. 40V/3A (2 adjustable channels), 5V/3A (1 fixed channel)

Retail price :$289.00

Depending on a destination shipping cost may vary.
See shipping page for international rates
or contact

In stock, 2 left

BuyAdd to cart

AKTAKOM ATH-3243 is a high-precision DC regulated power supply which is widely used in debugging process, repair and laboratory research. Besides other applications its a perfect power supply for science investigation, college, factory, electronic appliance maintenance and etc.

ATH-3243 outputs smoothly adjustable stabilized DC voltage and stabilized current. The model has three ways output: two ways are adjustable and one way is fixed.

The two adjustable outputs can also be selected for constant voltage or constant current, designed in high stability and performance circuit. In constant voltage state the output voltage can be arbitrarily adjusted from 0V on in the nominal range; and in the state of constant current the output current can be adjustable from 0A on in the nominal range. The two outputs can be connected in parallel or in series.

The one fixed way outputs 5 V voltage. Due to the single chip integrated regulator this output has good stability and ripple factor and it has reliable overload protection to protect ATH-3243 against being damaged whenever overload or short circuit.

The unit structure is rather compact, this allows ATH-3243 to occupy a minimal space and organize a high performance work area. Other features of this power supply include high performance, short circuit protection availability, modern design etc.

ATH-3243 has a digital indication, all information is displayed on 4 3-digit LED displays.


  • 4 3-digit LCDs
  • Separate current and voltage indication
  • Indicators of current (CC) and voltage (CV) stabilization
  • Short circuit protection
  • Stabilization mode (current, voltage)
  • Tracking mode for adjustable channels

Output voltage (V)40
Output voltage accuracy(0.5% + 2 digits)
Output voltage display resolution0.1 V
Output current (A)3
Output current accuracy(1% + 2 digits)
Output current display resolution0.01 A
Ripple and Noise2 mV
Load stability(0.02% + 2 mV)
Series working method0...80 V / 0...3 A
Parallel working method0...40 V / 0...6 A
Power supply110 V / 220 V
Dimensions10.2 x 6.3 x 13.4 in / 260 x 160 x 340 mm


  • Number of channels: 3
  • Output voltage of adjustable channels: 0...40 V x 2 (independent channels)
  • Output current of adjustable channels: 0...3 A x 2 (independent channels)
  • Series (40V/6A) and parallel (40V/3A) connection of adjustable channels
  • 3d channel is fixed: 5V/3A
  • Inaccuracy of output voltage setting: 0.5% + 2 digits
  • Inaccuracy of output current setting: 1% + 2 digits
  • Voltage ripple and noise, RMS (typical): 1mV
  • Power supply: 110V/220V
  • Dimensions: 10.2 x 6.3 x 13.4 in / 260 x 160 x 340 mm
  • Weight: 25.4 lb / 11.5 kg

Standard accessories:

  • Power cord
  • Fuse
  • User manual

Frequently Asked Questions

  • May I use AKTAKOM power supplies to charge accumulators?

  • May I use AKTAKOM power supplies to charge accumulators?

    AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.


    AKTAKOM ATH-3243 es una fuente de alimentacin regulada por CC de alta precisin que se usa ampliamente en el proceso de depuracin, reparacin e investigacin de laboratorio. Adems de otras aplicaciones, es una fuente de alimentacin perfecta para investigacin cientfica, universidad, fbrica, mantenimiento de aparatos electrnicos, etc.

    ATH-3243 emite una tensin de CC estabilizada suavemente ajustable y una corriente estabilizada. El modelo tiene tres formas de salida: dos formas son ajustables y una forma es fija.

    Las dos salidas ajustables tambin pueden seleccionarse para voltaje constante o corriente constante, diseadas en un circuito de alta estabilidad y rendimiento. En estado de voltaje constante, el voltaje de salida puede ajustarse arbitrariamente desde 0V en el rango nominal; y en el estado de corriente constante, la corriente de salida se puede ajustar desde 0A en el rango nominal. Las dos salidas se pueden conectar en paralelo o en serie.

    La nica va fija produce 5 V de tensin. Debido al regulador integrado de un solo chip, esta salida tiene una buena estabilidad y un factor de ondulacin y tiene una proteccin confiable contra sobrecargas para proteger el ATH-3243 contra daos en caso de sobrecargas o cortocircuitos.

    La estructura de la unidad es bastante compacta, esto permite que el ATH-3243 ocupe un espacio mnimo y organice un rea de trabajo de alto rendimiento. Otras caractersticas de esta fuente de alimentacin incluyen alto rendimiento, disponibilidad de proteccin contra cortocircuitos, diseo moderno, etc.

    ATH-3243 tiene una indicacin digital, toda la informacin se muestra en 4 pantallas LED de 3 dgitos.


    4 LCD de 3 dgitos
    Indicacin separada de corriente y voltaje
    Indicadores de estabilizacin de corriente (CC) y tensin (CV).
    Proteccin contra cortocircuitos
    Modo de estabilizacin (corriente, tensin)
    Modo de seguimiento para canales ajustables.

    Back to the section
    Choose your clamp meter!
    Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2021