Test & Soldering Equipment On-line Store

D.E.V.I.C.E.Log in

ATH-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel

Click an image to enlarge

Brand:
User's Manual: Download

2 x 30V; 2 x 3A; 5V/3A; 3 channel; 3 digit LCDs – 4 pcs. Series and parallel working methods. Designed for the use in debugging process, repair or in laboratory research

Retail price : $199.00

Check shipping cost

Depending on a destination shipping cost may vary.
See shipping page for international rates
or contact sales@tmatlantic.com

In stock, 4 left

Buy Add to cart

AKTAKOM ATH-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel - Rear view

AKTAKOM ATH-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel - Side view

AKTAKOM ATH-3333 Power supply with digital indication is designed for the use in debugging process, repair or in laboratory research.

ATH-3333 power supply outputs smoothly regulated stabilized DC Voltage up to 30V and stabilized current up to 3A.

3 digit LCDs – 4 pcs
Short circuit protection
Stabilization mode (current, voltage)

Channels	3
Output voltage (V)	30
Output voltage accuracy	±(1% + 2 digits)
Output voltage display resolution	0.1 V
Output current (A)	3
Output current accuracy	±(2% + 2 digits)
Output current display resolution	0.01 A
Ripple and Noise	1 mV / 2 mA
Load stability	±(0.01% + 5 mV)
Series working method	0...60 V / 0...3 A
Parallel working method	0...30 V / 0...6 A
Display	4 3-digit LCDs
Power supply	110 V / 220 V
Dimensions	14.4 x 6.5 x 10.4 in / 365 x 164 x 265 mm

Specifications:

Number of channels: 3
Output voltage (channel 1 and 2): 0...30 V x 2
Output current (channel 1 and 2): 0…3 A x 2
Output voltage/current (channel 3): 5V / 3A
Inaccuracy of output voltage setting: 1% + 2 digits
Inaccuracy of output current setting: 2% + 2 digits
Voltage ripple and noise, RMS (typical): 1mV
Current ripple and noise, RMS (typical): 2mA
Power supply: 110V/220V
Dimensions: 14.4 x 6.5 x 10.4 in / 365 x 164 x 265 mm;
Weight: 22.1 lb / 10.5 kg.

Standard accessories:

Power cord
User manual

Frequently Asked Questions

May I use AKTAKOM power supplies to charge accumulators?

May I use AKTAKOM power supplies to charge accumulators?
AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device. Up

AKTAKOM ATH-3333 La fuente de alimentación con indicación digital está diseñada para su uso en el proceso de depuración, reparación o investigación de laboratorio.

Las salidas de la fuente de alimentación ATH-3333 regulan sin problemas el voltaje de CC estabilizado hasta 30 V y la corriente estabilizada hasta 3A.

• LCD de 3 dígitos - 4 piezas
• Protección contra cortocircuitos
• Modo de estabilización (corriente, tension)

Back to the section