ADS-6122H-VGA-DMM Digital Storage Oscilloscope 100MHz 1GSa/s

AKTAKOM ADS-6122H-VGA-DMM Digital Storage Oscilloscope 100MHz 1GSa/s
Click an image to enlarge
Warranty:1 year
USB Host LAN (Local Area Network)

Retail price :$899.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact

Sold out


AKTAKOM ADS-6122H-VGA-DMM Digital Storage Oscilloscope offers high vertical resolution (12 bit), 2 channels with 100MHz bandwidth, 1GSa/s sample rate, 8″ color TFT-LCD display with 800x600 resolution, large amounts of memory (40Mpts), USB flash storage support, LAN interface. ADS-6122H-VGA-DMM Digital Storage Oscilloscope is very slim and lightweight.

AKTAKOM ADS-6122H-VGA-DMM comes with VGA output (with option ADS-6000VGA installed) that is very helpful to a teacher who wants to demonstrate oscilloscope’s functions on the large screen. AKTAKOM ADS-6122H-VGA-DMM digital storage oscilloscope could be connected to a large screen TV, a projector or any other screen and used for training and demonstrations. Perfect oscilloscope for education!

ADS-6122H-VGA-DMM digital storage oscilloscope offers buil-in digital multimeter (with option ADS-6000DMM installed).


  • 100MHz with 2 channels
  • 1GS/s
  • 40Mpts memory depth
  • 12 bit vertical resolution
  • Large 8″ 800×600 Pixels LCD display
  • Built-in DMM
  • AutoScale function
  • Pass/Fail function
  • Smart design with easy workplace
  • Interface USB 2.0 Host FAT32 & USB 2.0 Device, LAN, VGA
  • Nominal entrance: 100-240V 50-60Hz

Bandwidth100 MHz
Sample rate1 GSa/s
Memory depth40 Mpts
Vertical resolution (bits)12
Trigger typesEdge trigger, Pulse width trigger, Video signal trigger, Slope trigger, Runt, Windows, Timeout, Nth Edge, Logic
Number of automatic measurements28
Automatic measurementVpp, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Crms (Cycrms), Cursor RMS, Overshoot, PREShoot, Frequency, Period, Rise Time, Fall Time, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count, +Duty, -Duty, Duty Cycle, +Wid, -Wid, Delay A→B, Delay A→B¯, Phase
Waveform mathAddition (+), Subtraction (-), Multiplication (*), Division (/), FFT (fast Fourier transform)
Special featuresDigital multimeter
InterfaceUSB Host, USB Device, LAN, VGA
Display8 LCD TFT (800x600)
Power supply100...240 V
Dimensions13.4x7x3.5 in / 340x177x90 mm


Bandwidth 100MHz
Sample Rate 1GS/s
Vertical Resolution (A/D) 12 bits
Record length 40M
Waveform Refresh Rate 75,000 wfms/s
Horizontal Scale (s/div) 2ns/div - 1000s/div, step by 1 - 2 - 5
Rise Time (at input, typical) ≤3.5ns
Channel 2 + 1 (external)
Display 8" color LCD, 800 x 600 pixels
Input Impedance 1MΩ 2%, in parallel with 15pF 5pF; 50Ω 2%
Channel Isolation 50Hz : 100 : 1, 10MHz : 40 : 1
Max Input Voltage 1MΩ ≤ 300Vrms; 50Ω ≤ 5Vrms
DC Gain Accuracy 3%
DC Accuracy average≥16 : (3% reading + 0.05 div) for ΔV
Probe Attenuation Factor 0.001X - 1000X, step by 1 - 2 - 5
LF Respond (AC, -3dB) ≥5Hz (at input, AC coupling, -3dB)
Sample Rate / Relay Time Accuracy 1ppm
Interpolation sin(x) / x
Interval (ΔT) Accuracy (full bandwidth) Single: (1 interval time + 1ppm x reading + 0.6ns);
Average > 16: (1 interval time + 1ppm x reading + 0.4ns)
Input Coupling DC, AC, and GND
Vertical Sensitivity 1mV/div - 10V/div (at input)
Trigger Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic
Trigger Mode Auto, Normal, and Single
Trigger Level 2000div (1mv/div), 1000div (2mv/div), 400div (5mv/div), 200div (10mv/div), 100div (20mv/div), 40div (50mv/div), 200div (100mv/div), 100div (200mv/div), 40div (500mv/div), 20div (1v/div), 100div (2v/div), 40div (5v/div), 20div (10v/div)
Line / Field Frequency (video) NTSC, PAL and SECAM standard
Cursor Measurement ΔV, and ΔT between cursors, ΔV and ΔT between cursors, auto-cursor
Automatic Measurement Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count
Waveform Math +, -, ×, /, FFT
Waveform Storage 100 waveforms
Bandwidth full bandwidth
Phase Difference 3 degrees
Communication Interface USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, VGA
Frequency Counter available
Power Supply 100V - 240V AC, 50/60Hz, CAT II
Power Consumption <15W
Fuse 2A, T class, 250V
Battery (optional) 3.7V, 13200mA
Dimension (W x H x D) 13.4x7x3.5 in / 340 x 177 x 90 mm
Weight 5.7 lb / 2.60 kg

Multimeter Specifications

Full Scale Reading 3 digits (max 4000 count) Diode 0V -1.5V
Input Impedance 10MΩ Continuity Test <50 (30) beeping
Capacitance 51.2nF - 100uF: (3% 3 digits)
Voltage VDC: 400mV, 4V, 400V: (1 1 digit); max input: DC 1000V
VAC: 4V, 40V, 400V: (1 3 digits); frequency: 40Hz - 400Hz; max input: AC 750V (virtual value)
Current DC: 40mA, 400mA: (1.5% 1 digit); 10A: (3% 3 digits)
AC: 40mA: (1.5% 3 digits), 400mA: (2% 1 digit), 10A: (3% 3 digits)
Impedance 400Ω: (1% 3 digits), 4KΩ - 40MΩ: (1% 1 digit)


  • Probes x2
  • Test leads
  • USB cable
  • Power cord

User's Manual is not included.

You can see it on your oscilloscope's screen by pressing HELP

Frequently Asked Questions

  • The signal is displayed as ladder like waveform
  • How to save data to an external USB-drive?
  • When changing the horizontal sweep on the digital oscilloscope at different horizontal points observed inexplicable change in the form of the same signal, why is this happening?
  • There is wave form displayed, but it is not stable

  • The signal is displayed as ladder like waveform

    1. The time base setting maybe is too slow. Turn the horizontal SCALE knob to increase horizontal resolution.
    2. Maybe the display Type is set to "Vectors". Set it to "Dots" mode.


    How to save data to an external USB-drive?

    1. Press the save button on the oscilloscope control panel. The save settings menu will be available on the device screen.

    2. Use the buttons below the instrument to set the settings:

    • Type of

      Signal: Save Format - Waveform

      Settings: Save Format - Settings

      Image: Save Format Image

      Recording: Frame-by-Frame Recorder Mode

    • A source





    • Cell & Call - a call from the memory cell.
    • Storage location - USB drive.
    • Save button starts the save procedure.

    A window will open on the oscilloscope screen asking you to specify the name of the file to which the data will be saved.

    Rotate the "Multipurpose" knob to select the desired keys of the on-screen keyboard. Pressing this knob enters the selected character. After setting the file name, move the cursor to the "enter" soft key and press. The data will be written to the specified file. Further they can be viewed using the software AKTAKOM DSO-Soft6000

    When changing the horizontal sweep on the digital oscilloscope at different horizontal points observed inexplicable change in the form of the same signal, why is this happening?

    In fact, this is not a problem.

    Just keep in mind that you're using a digital oscilloscope, which digitizes the signal with different sampling rates depending on the selected horizontal sweep, and then connects the digitized points with strait line while restoring the real shape of the signal.

    Your first screen shows that you are measuring voltage 50 Hz with the 10 ms / div sweep and a sampling frequency of 20 kHz Ks/s

    One signal period (20 ms), digitized in this mode, 20E-03 (sec) * 20E03 (1/sec) = 400 points. This is enough to properly restore and interpolate a sine wave of 50 Hz (i.e. in a period of 20 ms).

    Normal display, with a sweep 10 ms / div:

    Distortion of the same signal at 10 s / div sweep

    Your second screen is set to sweep 10 sec / div, and sample rate on a sweep turned to 20 samples per second (20 Sa / s). I.e. one signal period 20 ms had: 20E-03 (sec) * 20 (1/sec) = 0.4 points. That means that to restore (to interpolate the points) a sine wave with less than one point in time is impossible, so you get this mess (known as "aliasing" or a false frequency) formed by the beats of the measured frequency and sampling frequency.

    In order to correctly install a data collection in a digital oscilloscope one should follow a simple rule - the sampling rate must be at least 5-10 times higher than the frequency signal, in that case you will not have the issues that we just discussed.

    This applies to all digital oscilloscopes and in no way connected to any particular make or model of oscilloscope or its probes.


    There is wave form displayed, but it is not stable

    • Check whether the Source item in the TRIG MODE menu is in conformity with the signal channel used in the practical application.
    • Check on the trigger Type item: The common signal chooses the Edge trigger mode for Type and the video signal the Video. Only if a proper trigger mode is applied, the wave form can be displayed steadily.
    • Try to change the trigger coupling into the high frequency suppress and the low frequency suppress to smooth the high frequency or low frequency noise triggered by the interference.


    Aktakom DSO-Soft 6000 Software for Oscilloscopes

    AKTAKOM DSO-Soft 6000 is an application software to read data from AKTAKOM ADS-6000 series digital oscilloscopes. The software can be downloaded after registering the device with its serial (factory) number. Aktakom DSO-Soft 6000 is designed to connect Aktakom ADS-6122, ADS-6122H, ADS-6222, ADS-6222H, ADS-6062H oscilloscopes to a personal computer. The software is in English and is not compatible with other oscilloscopes of the Aktakom series ADS-2000.

    Learn more...

    Free for registered users

    (51.33 Mb)
    Product registration required

    AKTAKOM ADS-6122H-VGA-DMM Osciloscopio de almacenamiento digitalofrece una alta resolucin vertical (12 bit), 2 canales con ancho de banda de 100 MHz, 1GSa/s frecuencia de muestreo, cantidad de memoria (40Mpts), pantalla 8″ TFT-LCD a color con una resolucin de 800x600, soporte de almacenamiento flash USB, interfaz LAN. El osciloscopio de almacenamiento digital ADS-6122H-VGA-DMM es muy delgado y ligero.

    AKTAKOM ADS-6122H-VGA-DMM viene con salida VGA (con la opcin de ADS-6000VGA instalada) esto es muy til para un maestro que quiere demostrar las funciones del osciloscopio en la pantalla grande. El osciloscopio de almacenamiento digital AKTAKOM ADS-6122H-VGA-DMM se puede conectar a un televisor de pantalla grande, un proyector o cualquier otra pantalla y se utiliza para el entrenamiento y demostraciones. El osciloscopio perfecto para la educacin!

    El osciloscopio de almacenamiento digital ADS-6122H-VGA-DMM ofrece un multmetro digital incorporado (con opcin ADS-000DMM instalada).


    • 100MHz con 2 canales

    • 1GS/s

    • Profundidad de memoria de 40Mpts

    • Resolucin vertical 12 bit
    • Pantalla LCD de 8″ con 800600 Pixeles

    • DMM incorporado

    • Funcin de AutoEscala

    • Funcin de Pasa/Falla

    • Diseo elegante con fcil lugar de trabajo

    • Interfaz USB 2.0 Host FAT32 & dispositivo USB 2.0, LAN, VGA

    • Entrada nominal: 100-240V 50-60Hz

    Back to the section

    Please give us your feedback to help us improve our website

    * - required fields

    Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2021