Depending on a destination shipping cost may vary. Free shipping for orders over $450 on items weighting under 20 lbs (certain restrictions apply!) See shipping page for international rates or contact sales@tmatlantic.comIn stock
AKTAKOM ATE-9030 is a sound level meter with real time SD memory card datalogger.
Features:
Main functions are designed to meet IEC 61672 class 2
A & C weighting networks comply with standards
0.5" standard microphone head
Time weighting (Fast & Slow) dynamic characteristic modes
Build External calibration VR
Auto range & Manual range selection
Available for external calibration adjustment
Condenser microphone for high accuracy & long-termstability
Memory function to store the Max. & Min. value
Hold and Peak Hold functions
Real time SD memory card Datalogger, Built-in Clock and Calendar, real time data recorder, sampling time set from 1 second to 3600 seconds
Manual datalogger is available (set the sampling time to 0), during the use of manual datalogger function it can set the different position (location) No. (position 1 to position 99)
Innovation and easy operation, computer doesn’t need any extra software, after the datalogger use just take the SD card away from the meter and plug in the SD card into the computer, it can download all of the measured value with the time information (year/month/date/hour/minute/second) to the Excel directly; then users can make the further data or graphic analysis by themselves
SD card capacity:1 GB to 16 GB
LCD with green light backlight, easy reading
Can default auto power off or manual power off
Data hold, record max. and min. reading
Microcomputer circuit, high accuracy
Power by UM3/AA 1.5 V) x 6 batteries or DC 9V adapter
Circuit: Custom one-chip of microprocessor LSI circuit
Display:
LCD size: 2.1in x 1.5in / 52mm x 38mm
LCD with green backlight (ON/OFF)
Measurement Range: 30 - 130 dB
Resolution: 0.1 dB
Function: dB (A & C frequency weighting), Time weighting (Fast, Slow), Peak hold, Data hold, Record (Max., Min.)
Accuracy (23 ± 5 °C): Characteristics of “A” frequency weighting network meet IEC 61672 class 2
Under 94 dB input signal, the accuracy are:
31.5Hz ± 3.5 dB
63 Hz ± 2.5 dB
125 Hz ± 2.0 dB
250 Hz ± 1.9 dB
500 Hz ± 1.9 dB
1 K Hz ± 1.4 dB
2 K Hz ± 2.6 dB
4 K Hz ± 3.6 dB
8 K Hz ± 5.6 dB
Remark:
The above specifications are tested only in RF Field Strength environment less than 3 V/M and frequency less than 30MHz
Frequency Weighting Network:
Characteristics of A & C:
A weighting: The characteristic is simulated as "Human Ear Listing" response. Typical when the environmental sound level measurement is being made, always select to A weighting
C weighting: The characteristic is near the "FLAT" response. It is typically suitable for the checking of machinery noise (Q.C. check) & measuring the tested equipment sound pressure level
Time weighting (Fast & Slow):
Fast - t= 200 ms
"Fast" range simulates the human ear response time weighting
Slow - t = 500 ms
"Slow" range makes it easy to get the average values of vibration sound level
Data hold: To freeze the measurement value
Peak hold: To keep the peak (max.) measurement value
Range selector:
Auto range: 30 to 130 dB
Manual range: 3 ranges, 30 to 80 dB, 50 to 100 dB, 80 to 130 dB, 50 dB on each step, with over and under range indication
Frequency: 31.5 to 8,000 Hz
Microphonetype: Electric condenser microphone
Microphone size: out size, 12.7mm dia. (0.5 in)
Calibration VR: Built-in external calibration VR, easy to calibrate on 94 dB level by screw driver
Calibrated via external SOUND CALIBRATOR (SC-941, optional)
Datalogger / Sampling Time / Setting range:
Auto:
1 second to 3600 seconds
Sampling time can set to 1 second but memory data may loss
Manual:
Push the data logger button once will save data one time
Set the sampling time to 0 second
Manual mode, can also select the 1 to 99 position (Location) no.
Memory Card: SD memory card. 1 GB to 16 GB
Advanced setting:
Set clock time (Year/Month/Date, Hour/Minute/ Second)
Decimal point of SD card setting
Auto power OFF management
Set beep Sound ON/OFF
Set sampling time
SD memory card Format
Data Output:
RS-232/USB PC computer interface:
Connect the optional RS-232 cable UPCB-02 will get the RS-232 plug
Connect the optional USB cable USB-01 will get the USB plug
Power off: Auto shut off saves battery life or manual off by push button
Operating Temperature: 0 to 50°C
Operating Humidity: Less than 85% R.H.
Power Supply:
Alkaline or heavy duty DC 1.5 V battery (UM3, AA) x 6 PCs, or equivalent
ADC 9V adapter input. (AC/DC power adapter is optional)
Power Current:
Normal operation (w/o SD card save data and LCD Backlight is OFF): Approx. DC 12 mA
When SD card save the data and LCD Backlight is OFF): Approx. DC 51 mA
If LCD backlight is on the power consumption will increase approx. 30 mA
Weight: 1.08lb / 489g
Dimensions: 9.6in x 2.7in x 1.9in / 245mm x 68mm x 45mm
General accessories:
Instruction manual
Hard carrying case
Soft carrying case
Optional Accessories:
Sound calibrator (94 dB)
Sound calibrator (94/114 dB)
Sound wind shield ball
SD Card (2 GB)
USB cable, USB-01
RS232 cable, UPCB-02
Data Acquisition software
AC to DC 9V adapter
Sound level meter measuring procedure
Power on by pressing the "Power On/Off Button", the meter's default function is "Auto range", "A frequency weighting" and "Fast time weighting". The LCD display will show unit "A. Fast Auto".
Select "A" or "C" frequency weighting by pressing the "A/C Button"
Note: The characteristic of A weighting is simulated as the "Human Ear Listening" response. Typically always select the A weighting when makes environmental sound level measurement. The C weighting characteristic is near the "FLAT" response. Typically it is suitable for checking the noise of machinery (Q.C. check) and knowing the real sound level of the tested equipment.
Determine proper measuring range by pressing the "Range Button". After power on the default range is "Auto range". In the same time the lower right display will show the text of "Auto". Under the auto range, press the "Range Button" once step by step will enter to the manual range (range 1, range 2, range 3) and auto range in sequence. There are still 3 manual ranges for your choice:
*Manual range 1 , 30 - 80 dB range: Display will show the unit of "30 - 80".
*Manual range 2 , 50 - 100 dB range: Display will show the unit of "50 - 100".
*Manual range 3 , 80 - 130 dB range: Display will show the unit of "80 - 130".
According to various measuring sound source, select the Time Weighting (Fast or Slow) by pressing the "Time Weighting Button".
Note:
If select the function of "Fast" time weighting, the display will show the unit of "FAST".
If select the function of "Slow" time weighting, the display will show the unit of "SLOW".
Data hold of ATE-9030 sound level meter
During the measurement, press the "Hold Button" once will hold the measured value and the LCD will display a "HOLD" symbol. Press the "Hold Button" once again will release the data hold function.
Data Record (Max., Min. reading)
The data record function records the maximum and minimum readings. Press the "REC Button" once to start the Data Record function and there will be a "REC" symbol on the display.
With the "REC" symbol on the display:
a) Press the "REC Button" once, the "REC MAX" symbol along with the maximum value will appear on the display. If intend to delete the maximum value, just press the "Hold Button" once, the display will show the "REC" symbol only and execute the memory function continuously.
b) Press the "REC Button" again, the "REC MIN" symbol along with the minimum value will appear on the display. If intend to delete the minimum value, just press "Hold Button" once, the display will show the "REC" symbol only and execute the memory function continuously.
c) To exit the memory record function, just press the "REC" button > 2 seconds at least. The display will revert to the current reading.
Preparation before execute datalogger function
Insert the SD card:
Prepare a "SD memory card" (1 GB to 16 GB, optional), insert the SD card into "SD card socket". The front panel of the SD card should face against the down case.
SD card Format:
If SD card just the first time use into the meter, it is recommended to make the "SD card Format "at first.
Time setting:
If the meter is used at first time, you should adjust the clock time exactly.
Can I using Aktakom Data Logger Monitor (ADLM-W) software load all of the information from the memory card to plot a graph?
The environment meter records data to the memory card in *.xls format. All of the data can be copied to the PC after the measurement process.
Aktakom Data Logger Monitor (ADLM-W) software can be used for the measurement data transmission (using Aktakom ACE-1025 interface converter) that means for online monitoring only.
How can I save data from SD card to the computer when using AKTAKOM ATE-9030 (ATE-9030BT) Sound level meter?
After execute the Data Logger function, take away the SD card out from the "SD card socket".
Plug in the SD card into the Computer's SD card slot (if your computer build in this installation) or insert the SD card into the "SD card adapter". Then connect "SD card adapter" into the computer.
Power ON the computer and run the "EXCEL software". Download the saving data file (for example the filename: SLA01001.XLS, SLA01002.XLS) from the SD card to the computer. The saving data will present into the EXCEL software screen (for example as following EXCEL data screens), then user can use those EXCEL data to make the further Data or Graphic analysis usefully.
AKTAKOM ATE Easy Monitor software provides the numerical indication of 4 channel measurements as well as the data recording into file in CSV format. For the device connection the use of ACE-1025/ACE-1026 USB-RS232 interface converters is required.
ADLM-w software is designed for data reading from devices of AKTAKOM ATT, ATE series, for measurement data acquisition, its processing, displaying and storage in a PC with Windows XP x32, Windows 7 x64, Windows 7x32, Windows 8 x64, Windows Vista OS.
AKTAKOM ATE-9030 es un medidor de nivel de sonido con registrador de datos de tarjeta de memoria SD en tiempo real.
caracteristicas:
• Las funciones principales están diseñadas para cumplir con IEC 61672 clase 2
• Las redes de ponderación A&C cumplen con las normas.
• 0.5 "cabeza de micrófono estándar
• Modos de características dinámicas de ponderación de tiempo (rápido y lento)
• Construir calibración externa VR
• Selección automática de rango y rango manual
• Disponible para ajuste de calibración externa
• Micrófono de condensador para alta precisión y estabilidad a largo plazo
• Función de memoria para almacenar el máximo. & Min. valor
• Funciones Hold y Peak Hold
• Registrador de datos de la tarjeta de memoria SD en tiempo real, reloj y calendario incorporados, grabador de datos en tiempo real, tiempo de muestreo establecido desde 1 segundo hasta 3600 segundos
• El registrador de datos manual está disponible (establezca el tiempo de muestreo en 0), durante el uso de la función de registrador de datos manual, puede establecer el número de posición (ubicación) diferente (posición 1 a posición 99)
• Innovación y fácil operación, la computadora no necesita ningún software adicional, después de que el registrador de datos use, simplemente retire la tarjeta SD del medidor y conecte la tarjeta SD a la computadora, puede descargar todo el valor medido con la información de tiempo (año / mes / fecha / hora / minuto / segundo) a Excel directamente; entonces los usuarios pueden hacer los datos adicionales o el análisis gráfico por sí mismos
• Capacidad de la tarjeta SD: 1 GB a 16 GB
• Pantalla LCD con luz de fondo verde, lectura fácil
• ¿Puede el apagado automático predeterminado o el apagado manual?
• Retención de datos, registro máx. y min. leyendo
• Circuito del microordenador, alta precisión.
• Alimentación por UM3 / AA 1.5 V) x 6 baterías o adaptador DC 9V
• Interfaz RS232 / USB PC COMPUTER
• Carcasa resistente y compacta