AM-3001 Digital LCR Meter

AKTAKOM AM-3001 Digital LCR Meter
Click an image to enlarge
RS-232 (Recommended Standard 232)

AM-3001 is a useful tool to measure a device’s characteristics with various functions. It provides more than 13 orders of magnitude, basic accuracy of 0.05% and 5 test frequencies.

Retail price :$1,504.00

Depending on a destination shipping cost may vary.
See shipping page for international rates
or contact

In stock, 1 left

BuyAdd to cart


  • Basic accuracy of 0.05%
  • 5 Test frequencies
  • Store up to 9 setups in the memory
  • Remote over RS-232C and GPIB/Handler (Option) Interface

InterfaceRS-232, GPIB, Handler


Measurement Modes: AUTO, R+Q, L+Q, C+D, C+R

Equivalent Circuit: Series or Parallel

Parameters Displayed: Value, Deviation, % Deviation or Bin Number. Deviation and % deviation are calculated from a stored relative value.

Averaging: 2~10 Measurement

Measurement Range:

  • R+Q R 0.0001Ω~2000MΩ Q 0.00001~50
  • L+Q L 0.0001μH~99999H Q 0.00001~50
  • C+D C 0.0001ρF~99999µF D 0.00001~10
  • C+R C 0.0001ρF~99999µF R 0.00001~99999kΩ

Test Frequency: 100Hz, 120Hz, 1 kHz, 10 kHz, 100 kHz

Frequency accuracy: ±100ppm

Drive Voltage: 0.1V, 0.25V, 1Vrms

Drive levels accuracy: ±2%

Measurement Rate: Slow, Medium, Fast: 2, 10 or 20 measurements per second at test frequencies of 1KHz and above 0.6, 2.4, or 6 measurements per second at 100z and 120Hz

Ranging: Auto or Manual

Triggering: Through External Trigger, Continuous, Manual or Remote over Rs232, GPIB or Handler Interface

Bias Voltage: Internal → 2.0 VDC±2% External → 0~+40 VDC (fused at 0.25A)

Conditions: At least 30 minutes warm up, 23°C±5°C

Basic Accuracy: 0.05%

Dimensions: 109x363x386 mm / 4.3x14.3x15.2 in

Weight: 5.8 kg / 204.6 oz

  • Power cord
  • User's manual
  • AM-3001-AE adaptor

Frequently Asked Questions

  • What is the purpose of Handler/Sorter interface use on DB25 of AKTAKOM AM-3001 LCR meter?

  • What is the purpose of Handler/Sorter interface use on DB25 of AKTAKOM AM-3001 LCR meter?

    Handler/Sorter interface on DB25 indicates sorting data as well as the information about the measuring process. The device switching with this interface is made by TTL signal setting. Trigger output protection is provided within 15 V.


    • 5 frecuencias de prueba
    • Capacidad para almacenar hasta 9 configuraciones en la memoria
    • Acceso remoto a travs del puerto RS-232C y manejo GPIB opcional si trae la Interface


    Modos de medicin: AUTO, R + L + Q, Q, C + D, C ​​+ R

    Equivalente Circuito: Serial o Paralelo

    Parmetros Se ha visto: Nmero Valor, desviacin,% Desviacin o Bin. La desviacin y la desviacin% se calcula a partir de un valor almacenado relativa.

    Promedio: 2 ~ 10 Medicin

    Gama de la medida:
    • R + Q R 0.0001Ω ~ 2000MΩ 0,00001 Q ~ 50
    L + Q L 99999H 0.0001μH ~ Q ~ 50 0,00001
    C + D C 0.0001ρF 99999μF ~ D ~ 0,00001 10
    C + R C 0.0001ρF ~ ~ 0,00001 R 99999μF 99999kΩ

    Frecuencia de prueba: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz

    Precisin de frecuencia: 100ppm

    Tensin Drive: 0.25V 0.1V, 1 Vrms

    Niveles Drive precisin: 2%

    Velocidad de medicin: Slow, Medium, Fast: 2, 10 20 mediciones por segundo con frecuencias de prueba de 1 kHz y por encima de 0,6, 2,4, o 6 mediciones por segundo con 100z y 120Hz

    Ranging: Auto o Manual

    Disparo: A travs del disparador externo, continuo, manual o remota a travs de RS232, GPIB o interfaz de controlador

    Bias Voltaje: 2,0 V CC Internal → 2% External → 0 ~ +40 VDC (fusible de 0,25 A)

    Condiciones: al menos 30 minutos en calor, 23 C 5 C

    Precisin bsica: 0,05% Dimensiones: 109x363x386 mm / 4.3x14.3x15.2 en

    Peso: 5,8 kg / oz 204,6

    Back to the section

    Please give us your feedback to help us improve our website

    * - required fields

    Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2021