ATT-6000 Tachometer

AKTAKOM ATT-6000 Tachometer
Click an image to enlarge
Warranty:1 year

Retail price :$82.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact

In stock

BuyAdd to cart

AKTAKOM ATT-6000 tachometer is designed for noncontact measurement of rotation velocity in hard to reach places and aggregates. ATT-6000 tachometer (analog of DT-2234B) provides safe and accurate RPM measurements.


  • Wide measuring range and high resolution.
  • Digital display gives exact RPM
  • Used the exclusive Micro-Computer LSI-circuit and crystal time base to offer the high accuracy measurement for fast measuring time.
  • The last max./min. value will be automatically stored in memory and can be obtained by pressing Memory Call button. Durable, long lasting components
  • Light weight ABS-plastic housing, the model comfortably fits your hand.

Tachometer99999 RPM
Tachometer accuracy(0.05%+1 digit)
Tachometer resolution0.1 RPM
Data hold+
Min/Max measurement+
Display5 digits, 0.4in/10mm LCD
Dimensions7.5 x 2.8 x 1.5 in / 190 x 72 x 37 mm


  • Display: 5 digits, 0.4in/10mm LCD
  • Measurement and range: 5 to 99,999 RPM
  • Resolution:
    - 0.1 RPM (0.5 to 999.9 RPM)
    - 1 RPM (over 1,000 RPM)
  • Accuracy: (0.05 % + 1 digit)
  • Sampling Time: 1 sec. (over 60 RPM)
  • Test range select: Automatic
  • Memory: Last, Maximum, Minimum value
  • Detecting distance: 2 to 6 in / 50 to 150 mm (typical max. 12 in / 300 mm, depending upon ambient light)
  • Time base: Quartz crystal, 4.194 MHz
  • Circuit: Exclusive one-chip of microcomputer LSI circuit.
  • Battery: 4 x 1.5V AA (UM-3) battery
  • Power consumption: Approx. DC 150 mA. (operation)
  • Operating temperature: 32 - 122F / 0 - 50C
  • Dimensions: 7.5 x 2.8 x 1.5 in / 190 x 72 x 37 mm
  • Weight: 8.3 oz / 235 g


  • Carrying case
  • Reflecting tape marks (600 mm)
  • Operation manual

ATT-6000 tachometer measuring procedure

Apply a reflective tape mark to the object being measured. The non-reflective area must always be greater than the reflective area. If the shaft is normally reflective, it must be covered with black tape or black paint before attaching reflective tape. Shaft surface must be clean and smooth before applying reflective tape.

Press Measuring button and point the light beam at the applied target.

Check the results on the display, which will light when the results get stabilized.

Frequently Asked Questions

  • What should I do if RPM is low when operating AKTAKOM ATT-6000 tachometer?

  • What should I do if RPM is low when operating AKTAKOM ATT-6000 tachometer?

    When making low RPM measurements attach several reflecting tape marks evenly. This will improve resolution and sampling time. Divide the reading shown on the display by the number of reflecting tape marks in order to get the correct measuring results.


    AKTAKOM ATT-6000 es un tacmetro porttil diseado para medir sin contacto la velocidad de rotacin en lugares y agregados difciles de alcanzar.


    • Medir RPM es seguro y preciso
    • Amplio rango de medicin y alta resolucin.
    • La pantalla digital da RPM exactas
    • Se utiliz el exclusivo circuito LSI Micro-Computer y la base de tiempo de cristal para ofrecer una medicin de alta precisin para un rpido tiempo de medicin.
    • El ltimo max./min. El valor se almacenar automticamente en la memoria y se puede obtener presionando el botn Llamada de la memoria. Componentes duraderos y duraderos
    • Carcasa de plstico ABS de peso ligero, el modelo se adapta cmodamente a su mano.

    Back to the section
    Choose your clamp meter!
    Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2022