This thermometer has a wide range of applications: food preparation, safety and fire inspectors, plastic molding, asphalt, marine and screen printing, measure ink and dryer temperature, diesel and fleet maintenance.
Depending on a destination shipping cost may vary. Free shipping for orders over $450 on items weighting under 20 lbs (certain restrictions apply!) See shipping page for international rates or contact sales@tmatlantic.comIn stock
AKTAKOM ATE-2523 Mid-range Infrared Thermometer is capable of non-contact (infrared) temperature measuring at the touch of a button. The built-in laser pointer increases target accuracy while the backlight LCD and handy push-buttons combine for convenient, ergonomic operation.
Features:
Precise non-contact measurements
Built-in laser pointer
Automatic selection range and Resolution to 0.1ºC or 1ºC
ºC/°F switchable button
Automatic Data Hold & Auto power off
The meter at 10 inches away measure 1in target
Backlite LCD display
MAX/MIN temperature measurement Function
Overrange indication and automatic power off
Unique flat surface, mini modern housing design
Accuracy
Accuracy is given at 18°C to 28°C (64°F to 82°F), less than 80%RH
50.0°C~-20.0°C (-58.0°F~-4.0°F): ±5°C/±9°F
-20.0°C~200.0°C (-4.0°F~200.0°F): ±2% of reading or ±2°C/±4°F
200.0°C~760°C (-200°F~1400°F): ±2.5% of reading or ±2°C/±4°F
Special Offer 1+: Buy 1 ATE-2523 Get Second or more for $71.00+ Multi-Tip Screwdriver as a Giftcall 786 597-7752 to place an order
Attention. Discounts for various special offers are not cumulative.
Power supply: 9V battery, NEDA 1604A or IEC 6LR61, or equivalent
Weight: 6.3oz/177g
Size: 6.2×3.21×1.7in/160×82×42mm
1. 9V battery
2. Carrying case
Measuring operation
Hold the meter by its Handle Grip and point it toward the surface to be measured
Pull and hold the Trigger to turn the meter on and begin testing. The display will light if the battery is good. Replace the battery if the display does not light
While measuring, the SCAN display icon will flicker in the upper left hand corner of the LCD
While continuing to pull the Trigger:
Push the Laser button to turn on the laser pointer. When the laser is on the laser icon will appear on the LCD over the temperature. Aim the red beam approximately a half inch above the point of test (pressing the Laser button again turns the laser off).
Select the temperature units (°C or °F) using the °C/°F buttons.
Push the Backlight key to turn on the LCD backlighting function.
Push the mode key to enter the max temperature or min temperature measurement
Release the Trigger and the HOLD display icon will appear on the LCD indicating that the reading is being held
The meter will automatically power down after approximately 7 seconds after the trigger is released.
How can I measure temperature with ATE-2523 pyrometer?
Pull and hold the Trigger to turn the meter on and begin testing. The display will light if the battery is good. Replace the battery if the display does not light. While measuring, the SCAN display icon will flicker in the upper left hand corner of the LCD.
Release the Trigger and the HOLD display icon will appear on the LCD indicating that the reading is being held.
The meter will automatically power down after approximately 7 seconds after the trigger is released.
Most (90% of typical applications) organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit).
Inaccurate readings will result from measuring shiny or polished metal surfaces. To compensate, cove the surface to be measured with masking tape or flat black paint. Allow time for the tape to reach the same temperature as the material underneath it. Measure the temperature of the tape or painted surface.
El termómetro infrarrojo de rango medio AKTAKOM ATE-2523 es capaz de medir la temperatura sin contacto (infrarrojo) con solo tocar un botón. El puntero láser incorporado aumenta la precisión del objetivo mientras que la retroiluminación LCD y los prácticos botones se combinan para un funcionamiento conveniente y ergonómico.
caracteristicas:
1.Precise las mediciones sin contacto
2.Built-en puntero láser
3. Rango de selección automática y resolución a 0.1ºC o 1ºC
Botón conmutable 4.ºC / ° F
5.Automatic Data Hold & Auto power off
6.El medidor a 10 pulgadas de distancia mide 1 pulgada de blanco.
Pantalla LCD 7.Backlite
Función de medición de temperatura 8.MAX / MIN
Indicación 9. Oververrange y apagado automático
10. Superficie plana única, mini diseño de vivienda moderna
Exactitud
La precisión se da de 18 ° C a 28 ° C (64 ° F a 82 ° F), menos del 80% de HR
50.0 ° C ~ -20.0 ° C (-58.0 ° F ~ -4.0 ° F): ± 5 ° C / ± 9 ° F
-20.0 ° C ~ 200.0 ° C (-4.0 ° F ~ 200.0 ° F): ± 2% de la lectura o ± 2 ° C / ± 4 ° F
200.0 ° C ~ 760 ° C (-200 ° F ~ 1400 ° F): ± 2.5% de la lectura o ± 2 ° C / ± 4 ° F
Oferta especial 1+: Compre 1 ATE-2523 Obtenga un segundo o más por $ 71.00 + Destornillador de punta múltiple como regalo llame al 786 597-7752 para hacer un pedido
Atención. Los descuentos para varias ofertas especiales no son acumulables.