AKTAKOM AM-1083 is a stable and battery-driven 3 1/2 digital multimeter. It is equipped with a large LCD clearly displaying the device measuring values. This multimeter can be used to measure DCV, ACV, DC, AC, resistance, capacitance, inductance, diode, triode, open circuit, temperature and frequency, as well as hold peak value. One of the features is the availability of overload protection.
AKTAKOM ASE-1102 is a professional temperature controlled soldering station which is especially recommended for transistors and microchips assembly produced in accordance with CMOS technology. The temperature can be easily regulated with a rotary switch on the front panel.
To protect electronic circuits when working with electronic components, boards and devices from potential danger it’s necessary to use protective ground equipment. AKTAKOM keeps a wide range of antistatic tools and equipment for this purpose.
AKTAKOM AWG-4150 generator is designed using direct digital synthesis (DDS) technology which ensures high frequency accuracy, low distortion, a fast transition from one frequency to another and lots of other high metrological parameters.
AWG-4150 represents both function and arbitrary waveform generator.
AKTAKOM ASE-4509 rework station offers an excellent solution for desoldering work. It is very easy for operation and can be widely used in the repairing and reworking areas and on most SMD rework job, like SOIC, CHIP, QFP, PLCC, BGA etc.
AKTAKOM tachometers are specially designed for accurate measurements of rotation speed as well as the shaft angular velocity. AKTAKOM tachometers use various measurement methods: contact, contactless photo, contactless laser pointer. And the combination of different measurement methods in one device allows user to widen the application area.
AKTAKOM ATT-6000 is a portable tachometer for noncontact measurement of rotation velocity in hard-to-reach places.
One of the important parameters of three phase networks is phase interlacing. Disregarding of this parameter can cause the equipment failure.
AKTAKOM ACM-6060 Phase rotation tester is used to control the correct connectivity of three phase equipment before the installation and during the test operation.
For service engineers working in production it often becomes necessary to measure shaft speed. And shaft diameter as well as the operation conditions may be different. What should they do in this case? Of course they may buy and use two different devices – contact tachometer and contactless one. But there is some other more convenient solution to use a combined type tachometer like Aktakom ATT-6006.
51 - 60 of 318 First