Industry news

RSS

Keysight Launches New Signal Analyzer to Accelerate Innovation in Wireless Communications
04/17/2020 | 630
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, launched the Keysight N9021B MXA X-Series Signal Analyzer which provides design validation and manufacturing engineers with superior phase noise performance at higher frequencies, and includes software that improves workflows while meeting 3GPP 5G new radio (NR) compliance standards.

Industry's first Grade 0 digital isolator enables reliable communication and protection in HEV/EV systems that exceed 125°C
04/14/2020 | 666
Texas Instruments (TI) introduced the industry’s first digital isolator that is qualified to the Grade 0 ambient operating temperature specification of the Automotive Electronics Council (AEC)-Q100 standard.

Rohde & Schwarz presents next generation test solutions for Bluetooth® Low Energy up to version 5.2
04/10/2020 | 649
The R&S CMW platform of Bluetooth® testers already support the new Bluetooth® Low Energy (LE) version 5.2 power control test routines. These are the only T&M instruments that measure all specified RF tests up to Bluetooth LE 5.0 via the air interface. This unique solution has already been submitted to the Bluetooth® SIG for the specification of a new Bluetooth LE test mode.

Keysight unveils ultra-high-density, multi-terabit test solution for data center operators and network equipment manufacturers
04/07/2020 | 609
Keysight Technologies, Inc. announced the release of the UHD100T32 100 Gigabit Ethernet (GE) test system, the industry's first test system purpose-built to help data center operators and network equipment manufacturers meet the density and cost-per-bit challenges of validating 100GE devices and networks.

Smallest 36-V, 4-A power module from Texas Instruments
04/03/2020 | 589
Texas Instruments (TI) introduced the industry’s smallest 36-V, 4-A power module in a quad flat no-lead (QFN) package. The TPSM53604 DC/DC buck module’s 5-mm-by-5.5-mm footprint enables engineers to shrink the size of their power supply by 30% while reducing power loss by 50% when compared to similar competing modules.

New R&S NGP800 power supplies boost efficiency with up to four independent channels in a single compact instrument
03/31/2020 | 1386
For any test and measurement application requiring up to four independent DC power supplies with full flexibility, full functionality, full safety and full connectivity, the R&S NGP800 power supply series will boost the efficiency in any lab or production line. Users benefit from the large 5” high resolution touch screen, which also displays detailed statistics.

Keysight Technologies joins Orbital Security Alliance (OSA) as full member
03/27/2020 | 609
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced that it joined the Orbital Security Alliance (OSA) as a full member.

Industry's smallest linear thermistors help engineers reach new thermal limits
03/24/2020 | 575
Texas Instruments (TI) expanded its temperature sensing portfolio to include linear thermistors that deliver up to 50% higher accuracy than negative temperature coefficient (NTC) thermistors. The higher accuracy of TI’s thermistors enables operation closer to the thermal limits of the other components and the overall system, helping engineers maximize performance while reducing bill-of-materials (BOM) and total solution cost.

Yokogawa releases CA500 and CA550 multifunction process calibrators
03/20/2020 | 798
Yokogawa Test & Measurement Corporation announces the release of two new multifunction process calibrators that can generate and measure signals with the highest class of accuracy. The CA500 and CA550 multifunction process calibrators are intended for use in the inspection and calibration of plant instruments.

Rohde & Schwarz extends collaboration with Thales to minimize field testing for IoT modules
03/17/2020 | 617
Rohde & Schwarz and Gemalto, a Thales company, are working on significantly reducing expensive and time-consuming drive tests. IoT protocol stack features have been specified by 3GPP, but IoT devices have to interact with different network configurations worldwide. This makes it important to ensure that these features are working well in all sorts of configurations, configured by different network operators.


News 401 - 410 of 1366
First | Prev. | 39 40 41 42 43 | Next | Last
AKTAKOM - the Best in Test Award Winner!
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024