Español

Industry news

RSS

Anritsu Introduces ShockLine VNA Solutions to Lower Test Costs Associated with Verifying E-band, Microwave Passive Component Performance
12/25/2015 | 260
Anritsu Company introduces an E-band option for its ShockLine™ MS46500B series of 2- and 4-port performance Vector Network Analyzers (VNAs) that addresses the market need to lower cost-of-test for E-band components. With the option installed, the MS46500B series can reduce production costs and more efficiently verify the performance of high-frequency passive components, such as antennas, filters, and duplexers, during manufacturing.

The most distance with less power - TI's new Sub-1 GHz solution spans 20 km on a coin cell
12/22/2015 | 232
Texas Instruments (TI) announced the availability of the next device in the SimpleLink™ ultra-low power platform, designed to help customers easily add ultra-low power, long-range connectivity to their Internet of Things (IoT) designs. The new SimpleLink Sub-1 GHz CC1310 wireless microcontrollers (MCUs) offers up to 20 years of battery life for building and factory automation, alarm and security, smart grid and wireless sensor network applications.

Keysight Technologies Introduces PAM-4 Capability for its Advanced Design System Channel Simulator
12/18/2015 | 331
Keysight Technologies, Inc. announced a four-level pulsed amplitude modulation (PAM-4) capability for the Keysight EEsof EDA Advanced Design System (ADS) Channel Simulator. The introduction of this capability further advances Keysight's leadership position in IBIS-AMI SerDes channel simulation.

Anritsu Simplifies Tower Optical Link Verification with Video Inspection Probe for Site Master Handheld Analyzers
12/15/2015 | 293
Anritsu Company continues to provide the most comprehensive test solutions for the installation and maintenance of legacy and emerging wireless networks with the introduction of a Video Inspection Probe (VIP) measurement mode for its Microwave Site Master™ S820E and Site Master™ S331L cable and antenna analyzers. The new VIP mode, a no-cost feature included with firmware revision V1.17 or higher, specifically addresses the ever-growing requirement to inspect optical fiber cables used to carry traffic data and signaling up/down to/from the radio hardware in modern wireless communication systems.

New R&S HMO1202 mixed signal oscilloscopes offer top performance at a great price
12/11/2015 | 593
Rohde & Schwarz introduces the R&S HMO1202 mixed signal oscilloscopes, a new family of entry-level instruments that deliver outstanding performance. A bandwidth of up to 300 MHz coupled with comprehensive math and FFT analysis functions make them eminently suitable for professional analysis of digital signals.

New Option Helps Engineers Perform Accurate, Convenient, High-Performance Bluetooth Audio Measurements
12/08/2015 | 261
Keysight Technologies, Inc. introduced the enhanced U8903B audio analyzer with new Bluetooth audio measurement capabilities. The Bluetooth option enables the U8903B to make high-performance Bluetooth audio testing for R&D, quality assurance and production tests in the consumer and professional audio and wireless communication industries.

Tektronix Rolls Out First Fully Automated MIPI M-PHY 3.1, CTS 3.1 Transmitter Test Solution for Mobile Storage Devices
12/04/2015 | 320
Tektronix, Inc., the world's leading manufacturer of oscilloscopes, announced the industry's first fully automated physical layer transmitter test solution for the MIPI® M-PHY® 3.1 specification and Conformance Test Suite (CTS) 3.1. The solution supports M-PHY High Speed Gears 1, 2 and 3, PWM Mode (G0-G7), and SYS Mode and offers the industry's lowest noise solution for M-PHY measurements when used with Tektronix DPO70000SX or MSO/DPO70000DX oscilloscopes and P7600 series probes.

TI introduces lowest latency, highest ESD industrial Gigabit Ethernet PHYs, enabling real-time Industry 4.0 applications
12/01/2015 | 219
Texas Instruments (TI) introduced the industry's lowest latency and highest electrostatic discharge (ESD) industrial Gigabit Ethernet physical layers (PHYs). The new family of six devices enables engineers to bring real-time industrial Internet of Things (IIoT) capabilities to rugged factory automation systems, motor drives, and test and measurement equipment. The new DP83867 family meets stringent electromagnetic interference (EMI) and electromagnetic compatibility (EMC) standards, reduces power consumption, and offers designers flexibility with multiple temperature, media access control (MAC) interface and packaging options.

The R&S CMW290 functional tester from Rohde & Schwarz supports M2M/IoT integration at an excellent price/performance ratio
11/27/2015 | 271
Machine-to-machine communications (M2M) and the Internet of Things (IoT) are leading the way into an increasingly networked world. The R&S CMW290 functional radio communication tester from Rohde & Schwarz is the right solution for users who want to integrate wireless modules into their platforms and test them.

Keysight Technologies Announces Handheld Digital Multimeters for Electronics, Industrial Industries
11/24/2015 | 271
Keysight Technologies, Inc. announced two new series of handheld digital multimeters (DMMs). In addition to offering the capabilities and measurement functions needed for the electronics and industrial test segments, the U1280 Series and U1240C Series handheld DMMs are extremely rugged and come with extended battery life to allow users to test and log data over a longer period of time.


News 161 - 170 of 694
First | Prev. | 15 16 17 18 19 | Next | Last All

Please give us your feedback to help us improve our website

* - required fields

Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2017