www.tmatlantic.com
Test & Soldering Equipment On-line Store |
D.E.V.I.C.E. (Wiki)Calculators Services |
Filter by first letter
ABCDEFGHIJKLMNOPQRSTUVWXYZ+-
Reset |
Electronics, electrical engineeringSearch by section D.E.V.I.C.E. services
A device to measure very small currents in nanoamperes (nA), picoampere (pA) and, in some cases, femtoamperes (fA).
A device that uses the piezoelectric effect to measure pressure, acceleration, strain or force by converting them to an electrical charge.
The simplest RC RL chains are first-order filters; they contain active resistances and one reactive element: capacitance or inductance, connected in series or parallel.
The wall socket voltage is actually 120 V and "formally" the peak-to-peak voltage is 339.36 V. However in reality, there are no such values in a wall outlet.
A switch used in electric circuit that redirects the path of electric current depending on the current inputs to the switch.
A Rogowski coil, named after Walter Rogowski, is an electrical device for measuring alternating current (AC) or high speed current pulses. It consists of a helical coil of wire with the lead from one end returning through the centre of the coil to the other end, so that both terminals are at the same end of the coil.
For the presence of non-ideality and distributed parameters of components, actual components are usually equivalent to combined network of ideal components. In general, there are two simple equivalent models used in LCR meters, which are series model and parallel model.
Thermistor (thermoresistor) is a semiconductor resistor, which electrical resistance considerably depends on temperature. It is used for registration, temperature measurement in thermal control systems, in power meters and other devices.
Articles 41 - 50 of 64 First | Prev. | 3 4 5 6 7 | Next | Last |
|
Site mapPrivacy policyTerms of Use & Store PoliciesHow to BuyShippingPayment |