www.tmatlantic.com
Test & Soldering Equipment On-line Store |
D.E.V.I.C.E. (Wiki)Calculators Services |
Filter by first letter
ABCDEFGHIJKLMNOPQRSTUVWXYZ+-
Reset |
OscilloscopesSearch by section D.E.V.I.C.E. services
The trigger is made in case all the signals being passed to the logic inputs of the logical function chosen cause the change of this function state for “true” or “false” when the clock input state is changed or stable (level timing).
LRF is one of auto measurement types of a digital oscilloscope in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first rising edge of channel 1 and the last falling edge of channel 2.
LRR is one of auto measurement types of a digital oscilloscope in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first rising edge of channel 1 and the last rising edge of channel 2.
Mathematical functions in digital oscilloscopes is a capability to perform mathematical operations between channels and to see the final oscillogram displayed.
Level corresponding the half of difference between the main upper and lower levels.
MegaZoom III is the third generation of the fast deep memory architecture in Agilent digital oscilloscopes which appeared in 1996. It combines fast deep memory with high speed of information capture and a high resolution display that allows detecting rare hidden signal aperiodicities.
One of the main functions of an oscilloscope is acquisition of the analog signal; that signal is then passed on to an analog to digital converter where the signal is digitized. Once it is digitized, that information has to be stored in memory, processed and plotted / displayed.
The registration (data acquisition) is made regardless of the fulfillment of the triggering terms, the data registration is typically reset after the data acquisition.
Articles 51 - 60 of 118 First | Prev. | 4 5 6 7 8 | Next | Last |
|
Site mapPrivacy policyTerms of Use & Store PoliciesHow to BuyShippingPayment |