| www.tmatlantic.com
Test & Soldering Equipment On-line Store |
|
D.E.V.I.C.E. (Wiki)Calculators Services |
|||||
Filter by first letter
|
OscilloscopesSearch by section D.E.V.I.C.E. services
A type of automatic measurements. The true Root Mean Square voltage over the entire waveform.
A type of automatic measurements. Measures the highest voltage over the entire waveform excluding overshoots.
Wave Inspector is a standard function of any Tektronix DPO3000 series models, considered innovative. It significantly simplifies ordinary and at the same time laborious debugging tasks: recorded signals research in order to find some separate events of interest. Earlier it was made manually by the data scrolling and the check of the passing signal flow.
Oscillogram waveform recorder is oscilloscope mode for automatic storage of the required input signal waveform frames within the specified time interval.
White noise is a random signal (or process) with a flat power spectral density. In other words, the signal contains equal power within a fixed bandwidth at any center frequency. White noise draws its name from white light in which the power spectral density of the light is distributed over the visible band in such a way that the eye's three color receptors (cones) are approximately equally stimulated.
The trigger is made at the signal input into the threshold window or the signal output out of it.
X-Y mode is a specialized two-channel mode of oscilloscopes when the signal of channel 1 is used for the deviation along the horizontal axis (X) and the signal of channel 2 – along the vertical axis (Y).
Zoom or fragment expansion mode allows expanding a marked oscillogram zone in the horizontal area throughout the full width of the display. Such fragment expansion of the basic oscillogram is used for more detailed signal analysis with higher horizontal resolution.
Articles 111 - 118 of 118 First | Prev. | 8 9 10 11 12 | Next | Last |
|