ATA-2502 Clamp Meter-adapter

AKTAKOM ATA-2502 Clamp Meter-adapter
Click an image to enlarge
Brand: AKTAKOM
Warranty: 1 year

Retail price: $149.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Sold out

Subscribe
AKTAKOM ATA-2502 is a clamp meter-adapter with analog output. If you connect it to a multimeter the measurement results will be displayed on the display of this multimeter. If you connect ATA-2502 (analog of Lutron CA-502) to an oscilloscope you will be able of researching a signal waveform.

DC Current (DCA)1000 A
DCA Accuracy±1.5%
AC Current (ACA)1000 A
ACA Accuracy±1.5%
Jaw size1.32 in / 33.5 mm
Power supply9V battery
Dimensions7.48 x 2.52 x 1.3 in / 190 x 64 x 33 mm

Specifications

  • ACA measurement: 0...1000 A; 2 ranges (200 A, 1000 A)
  • DCA measurement: 0...1000 A; 2 ranges (200 A, 1000 A)
  • Frequency range: 40...400 Hz
  • Output signal: 1 mV per 1 A (AC, DC)
  • Max. conductuctor size: 1.32 in (33.5 mm) diameter
  • DCA zero adjustment
  • Hall effect sensor
  • Low battery indicator
  • Power supply: 006P, MN1604 (PP3) DC 9 V battery
  • Operating temperature: 0...50 °C (32...122 °F)
  • Operating humidity: <80% RH
  • Dimensions: 7.48x2.52x1.3 in (190x64x33 mm)
  • Weight: 12.17 oz (345 g)
  • User manual

AKTAKOM ATA-2502 es un adaptador de medidor de pinza con salida analógica. Si lo conecta a un multímetro, los resultados de la medición se mostrarán en la pantalla de este multímetro. Si conecta el ATA-2502 a un osciloscopio, podrá investigar una forma de onda de señal.


Back to the section
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024