Español

ASE-4313 ESD-Safe Temperature Controlled Digital Soldering and SMD Rework Station

AKTAKOM ASE-4313 ESD-Safe Temperature Controlled Digital Soldering and SMD Rework Station
Click an image to enlarge
Brand:AKTAKOM
Warranty:14 Months
User's Guide:Download
ESD safe Lead-free compliant

ESD-safe temperature controlled soldering and SMD rework station; equipped with 60W mounting soldering iron of 392 ...896F / 200 ... 480C temperature range; 90W vacuum desoldering iron of 896F / 200 ... 480C; 1000W hot air gun of 212...932F /100 ... 500C; vacuum pump; replaceable tips and nozzles; high-quality durable easy replaceable ceramic heating element.

Retail price :$599.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Almost sold out,4left

BuyAdd to cart

AKTAKOM ASE-4313 Temperature Controlled Soldering and SMD Rework Station is designed for a wide range of repair processes and combines 3 devices in 1:

  • mounting soldering station (60 W, 392 ...896F / 200 ... 480C)
  • vacuum desoldering station (90 W, 392 ...896F / 200 ... 480C)
  • hot air gun (1000 W, 212...932F /100 ... 500C, 120 l/min) for QFP chips, SOP, PLCC, SOJ and BGA (using interchangeable nozzles).

This multifunctional station occupies a minimal space and organize a high performance work area.

AKTAKOM ASE-4313 Soldering and SMD Rework Station is ESD-safe. This is an important requirement that should be met since the absence of antistatic protection may cause the damage of valuable electronic components with electro static discharge.

ASE-4313 is equipped with high-quality heating element that can be easily replaced. This heating element is covered with alumoceramic layer and inserted into ceramic housing. Such a reliable structure fully isolates the heating element from the environment effect and therefore protects the heating element from corrosion providing its high durability accordingly. Such heating element provides very fast heating up.

Multilayer (copper, steel and stannum) cover of the soldering iron tip operating part has excellent thermal conduction and provides optimal high effective heat transmission.

AKTAKOM ASE-4313 rework station is equipped with a powerful built-in vacuum pump with the capacity of up to 150 l/min. It is perfect for the work with multilayer printed circuits. The hot air gun with the respectively selected nozzle effectively transmits the heat to the soldering area and therefore makes the flux melt at a comparatively low operating temperature. At the same time the melted flux is completely removed out of the smallest PCB holes. This happens due to the correct difference between pressure and pumping speed which does not allow the flux to cool down and get solid.

There is a temperature control blocker available that fixes the required temperature and protects it from unintentional adjustment.

Features:

  • Independent work sections
  • Temperature block system
  • Energy saving mode
  • Temperature control buttons
  • Auto sleep mode
  • Auto power off
  • Digital temperature calibration
  • Brushless motor
  • Auto cooling system
  • Built-in a powerful vacuum pump
  • Backlight function

Specifications:

  • Independent work sections
  • Temperature block system
  • Energy saving mode
  • Temperature control buttons
  • Auto sleep mode
  • Auto power off
  • Digital temperature calibration
  • Brushless motor
  • Auto cooling system
  • Built-in a powerful vacuum pump
  • Backlight function

Mounting soldering iron

  • Power: 60 W,
  • Temperature range: 392 ...896°F / 200 ... 480°C
  • Temperature range at sleep mode: 122…482°F / 50…250°C
  • Temperature stability of soldering iron: ±2°C (no load)
  • Resistance between the soldering nozzle and the ground: < 2Ohm

Vacuum desoldering iron

  • Power: 90 W
  • Temperature range: 392 ...896°F / 200 ... 480°C
  • Air flow pressure: 600 mm of vacuum

Hot air gun

  • Power: 1000 W
  • Temperature range: 212...932°F /100 ... 500°C,
  • Air flow: 120 l/min
  • Temperature stability: ±2°C (no load)

Dimensions: 20.5 x 9.8 x 16.5 in / 520 x 250 x 420 mm
Weight: 12.4 lb / 5.6 kg

Standard accessories:

  • Multifunctional control unit – 1 piece.
  • Soldering iron with a stand – 1 set.
  • Desoldering iron with a stand – 1 set.
  • Heat gun (connected with the control unit) - 1 piece.
  • Heat-resisting gripper for tips replacement - 1 piece.
  • Air filter - 1 piece.
  • Set of vacuum suctions (suction cups) for the heat gun - 1 piece.
  • Drill: 1.5 mm - 1 piece.
  • Pin for nozzle cleaning - 1 piece.
  • Set of 10 pins for nozzle cleaning - 1 piece.
  • Desoldering iron tips - 2 pcs.
  • Heat gun nozzle ( 5 mm, 6 mm, 8 mm) - 3 pcs.
  • Power cable - 1 piece.
  • Grounding wire with an alligator clip - 1 piece.
  • Replaceable filters set - 1 set.

Controls of AKTAKOM ASE-4313 Soldering and SMD Rework Station

Controls of AKTAKOM ASE-4313 Soldering Rework Station

Parameters setting of AKTAKOM ESD-Safe ASE-4313 Temperature Controlled Soldering and SMD Rework Station

Entering the menu

  1. Power off the device.
  2. Press and hold “INFO” and “VACUUM” keys simultaneously and turn on the power switch. At first the LCD will show “[” and then “---”. This means the station requires the password. You may enter the settings menu only if you use the correct password.
  3. Enter the password: By pressing TEMP buttons enter a figure of the first digit. Then press VACCUM button to go to the second digit. After you set the second digit do the same with the third one.
  4. There are two attempts given for the password entering. If you entered a wrong password both times the station will enter the operation state but you won’t be able to change auto power off time, temperature and air flow intensity.
  5. If the password is correct the station will enter the menu where you may also change the current password for a new one.

Parameters setting

  1. AKTAKOM ASE-4313 soldering station has three submenus: “-1-”, “-2-”, “-3-”. Any of these submenus can be selected with TEMP buttons. After you select the submenu press VACUUM button to enter it.
  2. “-1-” submenu is used to make the station enter the operation mode after VACUUM pressing.
  3. “-2-” submenu is used to adjust the sound signal.
  4. “-3-” submenu is used to set the password. After you enter this submenu the display will show “---”.
  5. To return to “-1-” menu, after you finish with parameters setting in “-2-” or “-3-”, press VACUUM button.

Sound signal adjustment

  1. To adjust the sound signal press any TEMP button, select “-2-” in the menu then press VACUUM button. The display will show “SP”.
  2. Using TEMP buttons select dynamic speaker sign. Its displaying means the sound signal is ON. If there is no such sign displayed, the sound signal is OFF.

Password

  1. Using TEMP buttons select “-3-” submenu and press VACUUM button. After that the station will suggest you to enter a new password and you will see “---” on the display with first digit blinking.
  2. Using TEMP buttons enter a figure of the first digit and press VACUUM button to confirm. The second and third figures are set the same way. After you enter this password the station will suggest you to repeat this new password to check its correctness.
  3. In case these two attempts do not coincide press VACUUM button to get the station to “-1-” submenu.
  4. If you entered the password for the second time correctly the station will accept this new password and display “OK”.

Setting of temperature and air flow intensity

Caution!

  • You may change the temperature only after correct password entering (the password on default is “000”).
  • Temperature and air flow intensity can be set in the data displaying mode only in one of three blocks of the soldering station.
  • If in “TOOL1”, “TOOL2” or “TOOL3” modes the display shows “-”, the settings of the soldering station can’t be changed.
  • If you switch off the power of the soldering station during the parameters setting such settings won’t be saved.

To set the parameters of any soldering station blocks you need to switch such block on first. If the block is OFF the display will show “-”. To switch it on press the relevant button - TOOL1, TOOL2 or TOOL3. After that the station will display the state of the selected block only and will be ready for parameters setting (temperature, air flow intensity and auto power off time). To change the temperature use TEMP button, for air flow intensity changing press AIR.

Temperature

TEMP↑ button increases the temperature by 1°C, TEMP↓ decreases it by 1°C, at the same time you may see the changes on the display. Keeping of any TEMP button pressed for 1 second or more will change the temperature very quickly.

Air flow

Press TOOL3 button then increase or decrease the air flow with AIR↑ or AIR↓ buttons accordingly, at the same time you may see the changes on the display. Keeping of any AIR button pressed for 1 second or more will change the air flow intensity very quickly.

Setting of auto power off time

  1. To set auto power off time for the soldering block (it can be changed at 00 to 99 min. range) press TOOL1. Then keeping INFO button pressed you may change the time using TEMP buttons.
    “--” on the display will mean the soldering iron won’t be automatically powered off.
    “00” on the display – the soldering iron will be switched off right after it’s set on the holder.
    Any value of “01~99” range will mean the soldering iron will automatically go off after the preset time of nonuse.
  2. To set auto power off time for the desoldering block: press TOOL2, then follow the similar steps described for the soldering block above.
  3. To set auto power off time for the hot air gun (it can be changed at 0 to 999 sec. range) press TOOL3, then follow the similar steps described for the soldering block above.
    “---” on the display will mean the hot air gun won’t be automatically powered off.
    Any value of “001~999” range will mean the hot air gun will automatically go off after the preset time of nonuse.

Switching ON after nonuse

  1. To switch on the soldering iron take it out of the holder. The soldering iron is ready for further work.
  2. To switch on the desoldering iron take it and press the red switcher on it.
  3. To switch on the surface mounting block take the hot air gun and press TOOL3 button.

Frequently Asked Questions

  • How can I calibrate the temperature when operating AKTAKOM ASE-4313 soldering station?
  • Which temperature mode should be selected for desoldering iron when operating AKTAKOM ASE-4313 soldering station?
  • Why dont the suction cups work when operating AKTAKOM ASE-4313 soldering station?
  • What do error messages mean when operating AKTAKOM ASE-4313 soldering station?

  • How can I calibrate the temperature when operating AKTAKOM ASE-4313 soldering station?

    You need to calibrate the temperature of AKTAKOM ASE-4313 soldering station after every replacement of the desoldering gun, nozzle or heating elements. To calibrate the temperature you need to enter the temperature digital value into the soldering station.

    Use a precise thermometer for the calibration.

    Temperature calibration is protected with the password.

    The following steps should be taken:

    1. Select a certain temperature value for the chosen tool (e.g. 300°C)
    2. After the temperature is stabilized you need to measure it with the thermometer and put down the readings.
    3. In the state display mode of only one of the tools press TOOL1, TOOL2 or TOOL3 and, while keeping it pressed, you need to press both TEMP↑ and TEMP↓ buttons simultaneously. The soldering station will enter the temperature calibration mode of that tool that you have chosen for calibration. For 2 seconds you will see “CAL” symbol on the screen, then ASE-4313 soldering station will suggest you to enter the temperature value.
    4. After that one of the digits will be blinking, you need to specify the temperature.
    5. Press VACUUM button. At this step you finish the temperature entrance
    6. If the calibration process is successfully passed you will see “OK” message on the display and after that the soldering station will return to an ordinary operation mode.

    Up

    Which temperature mode should be selected for desoldering iron when operating AKTAKOM ASE-4313 soldering station?

    If you choose the desoldering iron (TOOL2) specify the PCB temperature in accordance with the following rules:

    • 280…350 °C for one-sided PCB;
    • 320…400 °C for PCB with through holes;
    • 350…450 °C for multilayer PCB.

    Up

    Why dont the suction cups work when operating AKTAKOM ASE-4313 soldering station?

    Vacuum suctions of AKTAKOM ASE-4313 soldering station dont work if at this moment the desoldering unit is operating.
    Up

    What do error messages mean when operating AKTAKOM ASE-4313 soldering station?

    When there are some problems with any of the soldering station units you will see the following messages on the display depending on the situation:

    • S - E — Sensor error: this message appears in case the sensor, or anything in the sensing circuit, is out of order. At this moment the power from the defective unit will be switched off.
    • H - E — Heating elements error: this message appears if there is something wrong with the heating element. At this moment the power from the defective unit will be switched off.
    • ERR — motor component error: it appears when the air heater is out of order.

    Up

    La estacin de soldadura de temperatura controlada AKTAKOM ASE-4313 est diseada para una amplia gama de procesos de reparacin y combina 3 dispositivos en 1:

    • Estacin de soldadura de montaje (60 W, 392 ...896F / 200 ... 480C)

    • Estacin de desoldar al vaco (90 W, 392 ...896F / 200 ... 480C)

    • Pistola de aire caliente (1000 W, 212...932F /100... 500C, 120 l/min) para chips QFP, SOP, PLCC, SOJ and BGA (con el uso de boquillas intercambiables).

    Esta estacin multifuncional ocupa un espacio mnimo y garantiza un alto rendimiento del rea de trabajo.

    La estacin de soldadura es AKTAKOM ASE-4313 es ESD-seguro. Este es un requisito importante que se debe cumplir, ya que la ausencia de proteccin antiesttica puede causar daos en los componentes electrnicos valiosos con descarga electrosttica.

    ASE-4313 es equipado con un elemento de calefaccin de alta calidad que puede ser fcilmente reemplazado. Este elemento de calentamiento est cubierto con una capa de alumoceramica y se inserta en la carcasa de cermica. Tal estructura fiable asla completamente el elemento de calentamiento del ambiente y por lo tanto protege el elemento de calefaccin de la corrosin lo que proporciona una alta durabilidad. Tal elemento proporciona un calentamiento muy rpido.

    La multicapa (cobre, acero y estao) que cubre la punta operativa tiene una excelente conduccin trmica y proporciona una transmisin de calor ptima.

    La estacin de soldadura AKTAKOM ASE-4313 est equipada con una potente bomba de vaco incorporada con capacidad de hasta 150 l / min. Es perfecto para los trabajos con circuitos impresos multicapa. La pistola de aire caliente con la boquilla respectivamente seleccionada transmite eficazmente el calor a la zona de soldadura y por lo tanto hace que el flux se funda a una temperatura de funcionamiento relativamente baja. Al mismo tiempo el flux fundido se elimina por completo de los agujeros ms pequeos del PCB. Esto ocurre debido a la diferencia correcta entre la presin y la velocidad de bombeo lo que no permite que el flux se enfre y se haga slido.

    Hay un bloqueador de control de temperatura disponible que fija la temperatura requerida y la protege de ajuste no intencionado.

    Caractersticas:

    • Secciones de trabajo independientes

    • Sistema de bloques de Temperatura

    • Modo de ahorro de energa

    • Botones de control de temperatura

    • Modo de reposo automtico

    • Apagado automtico

    • Calibracin de temperatura digital

    • Motor sin escobillas

    • Sistema de enfriamiento automtico

    • Bomba de vaco de gran capacidad integrada

    • Funcin de luz de fondo


    Back to the section

    Please give us your feedback to help us improve our website

    * - required fields

    Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2017