Español

APS-3320L DC Power Supply Remote Controlled 600W 30V / 20A 1 Channel programmable

AKTAKOM APS-3320L DC Power Supply Remote Controlled 600W 30V / 20A 1 Channel programmable
Click an image to enlarge
Brand:AKTAKOM
Warranty:1 year
User's Guide:Download
USB Device LAN (Local Area Network)

FCC

AKTAKOM APS-3320L Benchtop DC Power Supply Programmable Remote Controlled (USB or LAN) is designed for industrial, laboratory and other engineering solutions. There is a four-wire (4-wire) connection scheme used. Includes Aktakom Power Manager Software for Windows (including Windows 10). Available software development kit (SDK) for LabVIEW, C++, LabWindows-CVI and MS VB is designed to help users in developing their own applications for AKTAKOM power supplies.

Shipment in 4-5 days after payment.

Retail price :$499.00

Depending on a destination shipping cost may vary.
See shipping page for international rates
or contact sales@tmatlantic.com

In stock now

BuyAdd to cart

AKTAKOM APS-3320L Single Output DC Regulated Bench remote controlled programmable power supply with Adjustable Current limit. Large Digital Display with LED meter displays Volts & Amps. Push button switch allows connection & removal of load. Multiturn Voltage control for precise settings. Front panel output Banana Jacks & Terminal strip for remote Voltmeter Sensing at the load.

There is a four-wire (4-wire) connection scheme used. This connection method provides accurate voltage supply preset in the load. This leads to the compensation of the wire resistance connecting the power supply and the load that is especially important in the industrial application of the power supply.

There is a single channel, output regulated voltage of 0…30 V, output current of 0…20A.

AKTAKOM APS-3320L programmable DC power supply differs from other similar power supplies by wide capabilities of local and remote control through AKTAKOM Power Manager software.

APS-3320L remote controlled power supply is capable of operating in several modes:

Manual control mode. Including the use of 4 memory cells to store preset voltage and current.

Remote control mode to operate AKTAKOM APS-3320L DC power supply by computer via USB interface through AKTAKOM Power Manager Software. Moreover the USB interface has full galvanic isolation between the power supply and the computer.

Remote control mode to operate AKTAKOM APS-3320L DC power supply by computer using an USB cable or LAN cable (ethernet).

Remote control mode to operate AKTAKOM APS-3320L DC power supply throught the remote access to the computer USB-connected to APS-3320L. AKTAKOM Power Manager Software provides the operation in server-client mode even for power supplies without built-in LAN interface. Meanwhile the power supply is physically connected to computer-server via USB interface and the data is available for reading from any computer of the network.

AKTAKOM Power Manager Software (APM) provides a wide range of control capabilities of output voltage and stabilization current both in manual and functional modes. Functional control is a very powerful tool of APM software which allows you not only to control your DC power supply automatically by computer but also to program its off-line operation mode by prespecified algorithm. Functional control mode in APM software allows automatically controlling the output parameters (voltage and current) of the power supply according to the principle specified with the help of graphics and tabular editors. In a convenient graphics editor user may specify 10 standard forms of parameters (including sine, square, triangle, saw, flash, pulse, 2 types of exponents, 2 types of S-curves), as well as, almost any arbitrary form which can be described formulary. The program operation in equipment operation compatibility mode is also available.

The software system for AKTAKOM APS-3320L remote controlled DC power supply includes a software development kit (SDK) This SDK contains the device driver with all necessary functions for the power supply operation and represents dynamic-link library (DLL) Windows followed with the library header file in the C programming language, with LabWindows function tree and the tool library for LabVIEW which fully repeats it. Additionally (in contrast to APS-3xxxLx_SDK_Base Software Development Kit) it contains the examples of programming in the following development environment: Borland C++ Builder, MS Visual C++, NI LabWindows/CVI and NI LabVIEW.

Features

  • Input: 110/220VAC 50Hz/60Hz
  • Output: 0-30VDC @ 0-20A
  • SMD technology
  • Attractive digital display shows voltage and current
  • Cooling fan
  • High precision voltage regulation
  • Proqressive current regulation
  • Dual terminal system: Safety test style or expandable screw terminals
  • Overload protection circuit
  • Output polarity: positive or negative
  • Remote control via USB or LAN
  • Rugged reinforced metal frame construction

Output voltage (V)30
Output voltage accuracy(0.1% + 2 digits)
Output voltage display resolution10 mV
Output current (A)20
Output current accuracy (0.1% + 2 digits)
Output current display resolution0.01 A
Output power600 W
Ripple and Noise5 mV
Load stability(1% + 10 mV)
InterfaceUSB Device, LAN
Display2 LED displays
Power supply110 V / 220 V
Dimensions10.4 x 5.5 x 14.2 in / 265 x 140 x 360 mm

Specifications

  • Regulated Single Channel with Current Limit
  • Input: 110VAC 60Hz
  • Output: 0-30VDC @ 0-20A
  • Rated Output Power: 600W
  • SMD technology
  • Four-wire (4-wire) connection scheme used. This connection method provides accurate voltage supply preset in the load. This leads to the compensation of the wire resistance connecting the power supply and the load that is especially important in the industrial application of the power supply.
  • Button to connect/disconnect the load
  • Digital display shows voltage and current with LEDs
  • Cooling fan
  • High precision voltage regulation
  • Display resolution: 10mV (Voltage) / 1mA (Current)
  • Ripple And Noise: 3mVrms
  • Remote control via USB or LAN
  • Dimensions (WxHxD): 10.4x5.5x14.2in/265x140x360mm
  • Weight: 40lb/18kg

Standard accessories

  • Pair of high power Cables with connectors

  • Power Cord

User Manual

  • Software (can be downloaded from our website)

      Optional accessories

      • USB cable
      • LAN cable
    • Controls of AKTAKOM APS-3320L, 3610L power supply

      Power supply to load four-wire connection method

      The sampling terminals are used under the following conditions: if the load has a distance from the power supply, the sampling terminals may be used to compensate for the inherent when using voltage drop a longer power line.

      Sampling terminals connection to compensate the voltage drop:
      Voltage drop compensation
      Sampling connection diagram:

      Attention: Disconnect the installed S- and S+ shorting wires when using the sampling connections.

      Frequently Asked Questions

    • What is the assignment of Aktakom Power Manager?
    • How can I work in the current stabilization mode?
    • How can I connect Aktakom APS-3320L power supply to my PC?
    • What instruction should I follow to work in the voltage stabilization mode?
    • Do AKTAKOM power supplies have short circuit protection?
    • How to connect to the power supply via web-interface?
    • May I use AKTAKOM power supplies to charge accumulators?
    • How to see a device serial number in AKTAKOM Power Manager software?

    • What is the assignment of Aktakom Power Manager?

      AKTAKOM Power Manager (APM) Software offers wide opportunities for controlling the output voltage and stabilization current both in arbitrary (manual) and in functional modes. Functional control is a powerful APM software tool which allows you not only to automatically control the power supply via your computer but also to program it for the off-line mode operation in accordance with the predetermined algorithm. Functional control mode in APM software allows you to automatically control the output parameters (voltage or current) of the power supply according to the law set by the graphical and tabular editors. In the convenient graphical editor user may set 10 standard forms of parameter changes (including: sine, square, triangle, saw, flash, pulse, 2 types of exponent, 2 types of S-curves) as well as any arbitrary shape which can be described with a formula.

      1. The software has no physical media (CD) and can be downloaded at www.tmatlantic.com after registering the equipment with a serial number. Therefore follow Product registration link on www.tmatlantic.com
      2. PC installation of AKTAKOM Power Manager Software is instructed on www.tmatlantic.com and www.aktakom.com
      3. Please note! When you run AKTAKOM Power Manager Software for the first time it will require an access key. This key can be received (copied) at www.tmatlantic.com after the product registration. The key can be entered later, see Settings/Pass key menu.


      Up

      How can I work in the current stabilization mode?

      1. If OUTPUT indicator is red than press LOAD button. In that case OUTPUT indicator should go out and the current indicator will display the set current value.
      2. By using VOLTAGE adjustment rotary switch set the required output voltage (at the same time nothing should be connected to the output terminals «+» and «-»).
      3. By using CURRENT rotary switch set the maximum allowable current value (current limit value) for your load. If in the operating mode the load resistance change will cause the excess of the specified current limit, the power supply will automatically switch to the current stabilization mode and the output voltage will proportionally fall.
      4. Connect the load to the power supply and press LOAD button. OUTPUT indicator should become red.
      5. Before you disconnect the load press LOAD button. OUTPUT indicator will go out.
      6. Before switching off the power supply, disconnect the load.

      Up

      How can I connect Aktakom APS-3320L power supply to my PC?

      Connection to the PC is made via USB or LAN located on the rear panel of APS-3320L. The first connection to your PC should be made via USB interface. This will help to install the network parameters of your local network for the connection to the power supply. Installation instruction for the network parameters is given in HELP file.

      1. For the device automatic search and connection it is not recommended to run AKTAKOM Power Manager Software after the PC installation but at first to connect the USB cable of APS-3320L to the PC and then to run the program agreeing with the device automatic search. You may connect your AKTAKOM power supply to the PC manually, see HELP file.

      2. Please note! When you run AKTAKOM Power Manager Software for the first time it will require an access key. This key can be received (copied) at www.tmatlantic.com after APS-3320L registration. The key can be entered later, see Settings/Pass key menu. If you do not enter the key after you run the software this program will operate in demo-mode.

      3. State (status) of the AKTAKOM power supply remote control is indicated on the front panel with the connection indicator:

      • in the manual control mode – the indicator is OFF,
      • USB cable is connected (operation via USB) – the indicator is red,
      • LAN cable is connected (USB cable is disconnected) – the indicator is green,
      • there is “connected” mode set in the program (the device is operating in the remote control mode, the manual control is OFF) – the indicator is blinking in green or red color.

      4. After interface connection, the network cable connection and active work of the local network the indicators of LAN socket should be blinking. Note: when you operate via LAN you need to DISCONNECT the USB cable.

      5. USB interface takes priority. After you connect the USB cable the power supply can be controlled via the PC and the program connected via USB.

      6. Please note! Be careful! Disconnection of the USB or LAN cable or the controlling program will return the voltage and current values which were set manually using «LOAD» button and the rotary switches on the front panel (Fig 1, 11,12.13.). Always before entering the remote control mode it’s recommended to switch off «LOAD» button.

      If you have any questions concerning the use of interfaces or the software check the detailed description and the section with frequently asked questions at www.tmatlantic.com and www.aktakom.com.


      Up

      What instruction should I follow to work in the voltage stabilization mode?

      1. If OUTPUT indicator is red than press LOAD button. In that case OUTPUT indicator should go out and the current indicator will display the set current value.
      2. Adjust VOLTAGE adjustment rotary switches in order to obtain the maximum allowable load voltage on the power supply output. If in the operating mode the load resistance change will cause the excess of the specified voltage limit, the power supply will automatically switch to the voltage stabilization mode with setting on terminals «+» and «-» of the preset voltage value limit, and the output current will proportionally fall.
      3. By using CURRENT rotary switch set the maximum allowable current value (current limit value) for your load.
      4. Connect the load to the power supply and press LOAD button. OUTPUT indicator should become red.
      5. Before you disconnect the load press LOAD button. OUTPUT indicator will go out.
      6. Before switching off the power supply, disconnect the load.

      Up

      Do AKTAKOM power supplies have short circuit protection?

      Yes they have.
      Almost all modern power supplies have two operation modes: voltage stabilization mode and current stabilization mode. In case of short circuit the power supply automatically switches from the output voltage stabilization mode to the output current stabilization mode, and the output voltage starts proportionally dropping. At the same time the current in the load connected to the power supply will be limited with the value set with the screwdriver slot used to adjust the output current value on the front panel of the power supply. For the best protection it is recommended to set a low current value. In case of short circuit the current in the connected load will be limited with the value set on the power supply.
      Up

      How to connect to the power supply via web-interface?

      There is no web-interface remote control feature for this power supply. To control the power supply remotely use the software provided in the standard accessory kit for the device.
      Up

      May I use AKTAKOM power supplies to charge accumulators?

      AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.


      Up

      How to see a device serial number in AKTAKOM Power Manager software?

      The program automatically reads the serial numbers of all devices found. To detect the device open Settings window, go to Connection and Presets tab, select the right device type you need in the list of models and click “Detect”:

      In the list of detected devices you will see all names and serial numbers of the devices found.

      After you select one of the detected devices and connect it to the program its serial number will be displayed in the program main window title.
      Up

      AKTAKOM File Converter (AULFConverter)

      AKTAKOM File Converter (AULFConverter)is an utility to convert AKTAKOM data file format used in AKTAKOM applications including APMto other formats such as CSV and WAV.

      Learn more...

      Free for registered users

      Download
      (5.75 MB)
      Product registration required

      AKTAKOM Power Manager (APM)

      APM (AKTAKOM Power Manager) is an application software to control and programming an Aktakom Power Supplies APS-730xL & APS-3xxxL from a computer using an USB cable or a local area network (LAN).

      Learn more...

      Free for registered users

      Download
      (14.31 MB)
      Product registration required

      Aktakom PS Calibration

      Learn more...

      AKTAKOM USB Device Driver for Windows (AUNLibUSB)

      AUNLibUSB device driver for Windows supports AKTAKOM USB Lab instruments (PC-based oscilloscopes and other). AUNLibUSB driver is a low-level program which does not communicate with user directly neither has user interface. After its installation in the operating system the driver starts working as a part of this operating system and supplies applications with the access to the resource of AKTAKOM supported devices and appropriate programs.

      Learn more...

      Free for registered users

      Download
      (0.54 MB)
      Product registration required

      AKTAKOM Web Server (AULWebServer)

      AULWebServer is a web interface based application (TCP/IP protocols). It allows remote control of an AKTAKOM instrument over the local area network (LAN).

      Learn more...

      Free for registered users

      Download
      (26.31 MB)
      Product registration required

      APS-3xxxLx_SDK Software Development Kit

      This full versionkit is designed to help users in creating their own applications for the following devices: APS-31xxL, APS-33xxL, APS-36xxL..

      Learn more... Download
      (6.64 MB)
      Product registration required

      APS-3xxxLx_SDK_Base Software Development Kit

      The kit is designed to help users in creating their own applications for the following AKTAKOM power supplies: APS-31xxL, APS-33xxL, APS-36xxL.

      Learn more... Download
      (5.75 MB)
      Product registration required

      APS-3xxxLx_SDK_MS_VB Software Development Kit

      This full versionkit is designed to help users in creating their own applications for the following devices: APS-31xxL, APS-33xxL, APS-36xxL. Capable of working in Windows and LabView environments with USB and LAN interfaces.

      Learn more... Download
      (5.82 MB)
      Product registration required

      Fuente de Poder CD regulable con limite de corriente ajustable de una salida. Pantalla grande digital con indicador LED para mostrar voltios y amperios. Boton interruptor de salida y eliminacin de carga. Control de multivuelta para el ajuste preciso del voltaje. Conectores en el panel frontal tipo "Banana" y regleta de salida para voltimetro de teledeteccin de la carga.

      caractersticas

      • Entrada: 110 VAC 60 Hz
      • Salida: 0-30VDC @ 0-20A
      • Tecnologa SMD
      • Pantalla digital atractiva muestra de voltaje y corriente
      • Ventilador de enfriamiento
      • Alta precisin de regulacin del voltaje
      • Regulacin Proqresiva de la Corriente
      • Dos Sistemas de terminales: Banana con seguridad y de tornillos expandibles
      • Proteccin de sobrecarga del circuito
      • Polaridad de la salida: positivo o negativo
      • Marco robusto con metal reforzado
      • Dimensiones (AxHxL): 10.4 "x 5.5" x14.2 "(265x140x360 mm)
      • Peso:40 libras (18 Kg)

      Back to the section

      Please give us your feedback to help us improve our website

      * - required fields

      Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2017