APS-5333 DC Remote Controlled Power Supply 195W 30V / 3A 3 Channels programmable

AKTAKOM APS-5333 DC Remote Controlled Power Supply 195W 30V / 3A 3 Channels programmable
Click an image to enlarge
User's Guide:Download
USB Host RS-232 (Recommended Standard 232)

AKTAKOM APS-5333 Benchtop Programmable Remote Controlled (USB) DC Power Supply is designed for industrial, laboratory and other engineering solutions.

Retail price :$629.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact

Sold out


AKTAKOM APS-5333 is a high-performance linear DC remote controlled programmable power supply. The excellent features of this DC power supply include up to 100 output groups with configurable timer, high-resolution LCD display, extremely clean ripple and noise, comprehensive over-voltage over-current over-temperature protection. AKTAKOM APS-5333 DC remote controlled programmable power supply offers user friendly interface and panel layout, and variety standard interfaces to meet diverse test requirements.

There are 3 channels, output regulated voltage of 0…30 V, output current of 0…3 A.


  • Dual independent outputs with Separate controls and one fix output supplies up to 195W total power
  • Two controllable channels with switch for operation conveniency
  • Highest output resolution: 1mV/1mA
  • Insulation between three output channels effectively reduce the interference
  • Outstanding line regulation rate:≤0.01%+2mV (voltage), ≤0.01%+1mA (current)
  • low ripples noise:<300 μVrms/2mVpp
  • Four operating mode: independent, parallel connection, series connection, plus-minus
  • Over-voltage over-current protection: the parameters of over-voltage and over-current are configurable to enhance the load protection
  • Up to 100 groups timers and predefine or unlimited output loop to generate arbitrary waveforms
  • Up to 30 groups preset system configurations
  • Auto-cooling system
  • 3.9 inch high resolution (480*320 pixels) TFT LCD display
  • Multiple Interface: USB 2.0 RS-232

Output voltage (V)30
Output voltage accuracy≤ 0.05%+1 mV
Output voltage display resolution1 mV
Output current (A)3
Output current accuracy≤ 0.1%+1 mA
Output current display resolution1 mA
Output power195 W
Ripple and Noise≤ 300 μVrms (≤ 3 mArms)
Series working method60 V / 3 A
Parallel working method30 V / 6 A
Special featuresProgrammable
InterfaceUSB Host, USB Device, RS-232
DisplayLCD 480x320
Power supply110 V
Dimensions19 x 9 x 13 in / 480 x 230 x 330 mm


Channel Channel 1/Channel 2 Fixed 5V
DC Output Ratings Voltage Independent/Parallel 0∼30V 5V
Series 0∼60V
Plus-minus -30V∼30V
Current Independent/Series/Plus-minus 0∼3A 3A
Parallel 0∼6A
Line Regulation CV ≤0.01% + 3mV ≤3mV
CC ≤0.1% + 3mA  
Load Regulation CV ≤0.01% + 3mV ≤0.1%+3mV
CC ≤0.2% + 3mA  
Noise and Ripple
CV ≤300μVrms / 2mVpp ≤300μVrms / 2mVpp
CC ≤3mArms  
Settings Resolution Voltage 1mV None
Current 1mA None
Settings Accuracy
Voltage ≤0.05% + 1mV None
Current ≤0.1% + 1mA None
Read Back
Voltage 1mV (<10V) 10mV (≥10V) None
Current 1mA None
Read Back Accuracy
Voltage ≤0.05% + 1mV(<10V)  ≤0.05% + 10mV(≥10V) None
Current ≤0.1% + 1mA None
  • Display Type: 3.9 inch colored LCD
  • Display Resolution: 480 (Horizontal) × 320 (Vertical) Pixels
  • Display Colors: 65536 colors, TFT screen
  • Dimensions: 19x9x13in / 480x230x330mm
  • Weight:13.8lb / 6.2kg
  • Power Cord

  • CD-ROM

  • USB data cable

Frequently Asked Questions

  • May I use AKTAKOM power supplies to charge accumulators?

  • May I use AKTAKOM power supplies to charge accumulators?

    AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.


    El APS-5333 es una nueva fuente de poder de alto rendimiento y programable de suministro lineal de corriente continua. Las excelentes caractersticas de este dispositivo incluyen hasta 100 grupos de salida con temporizador configurable, pantalla de alta resolucin LCD, onda extremadamente limpia y sin ruido, proteccion de sobre voltaje, corriente y temperatura, interfaz fcil de usar con panel amigable para satisfacer lasmas diversas variables de prueba.


    1. Salida doble independientes con controles separados y una salida fija de hasta 195 vatios de potencia total.
    2. Dos canales controlables con interruptor para el funcionamiento mas conveniente.
    3. Resolucion alta de salida: 1mV/1mA
    4. Insulation entre los tres canales de salida que reduce la interferencia efectivamente.
    5. Insuperable coeficiente de regulacin de lnea: :≤0.01%+2mV (voltage), ≤0.01%+1mA (corriente).
    6. Ruido bajo de ondas: <300 μVrms/2mVpp
    7. Cuatro modos de funcionamiento: Independiente, conexin paralela, en serie, ms y menos.
    8. Proteccin: de sobre voltaje y corriente, los parmetros de sobre-voltaje y sobre corriente son configurables para mejorar la proteccin de la carga de salida.
    9. Hasta 100 grupos de temporizadores y valores predefinidos o ilimitados para generar formas de onda arbitraria.
    10. Hasta 30 grupos de configuraciones predeterminadas del sistema.
    11. Sistema de enfriamiento automatico.
    12. Monitor TFT LCD de 3.9 pulgada con alta resolucin (480 x 320 pxeles).
    13. Interfaces: USB 2.0 RS-232

    Back to the section

    Please give us your feedback to help us improve our website

    * - required fields

    Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc.,2010-2017