Español

PA-677 Current Probe

 PA-677 Current Probe
Click an image to enlarge

Retail price : $875.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Sold out

Subscribe

The PA-677 current probe enables a general purpose oscilloscope to display AC and DC current signals up to 70 A Peak (50A RMS). The PA-677 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory (BNC-to-banana) plug adapter.

Features

  • High sensitivity of 2mA
  • Wide AC bandwidth up to 1MHz
  • Low noise (about 1/3 lower than competitors)
  • Dual power: AC adaptor for indoor, batteries for outdoor applications
  • Detachable output wire — convenient for packing, storing and self examination for any damages

Specifications

Max. DC A Current± 70A DC
Max. AC A Peak140A p-p
Max. AC A RMS50A rms
Range Selection
Division
2 Range
20mV/A;500mV/A
Max. Sensitivity500mA
DC Accuracy Typical±3% ±20mA at 500mV/A
(20 mA to 14A peak range)
±4% ±200mA at 50mV/A
(200mA to 100A peak range)
±15% max at 50mV/A
(100A peak to 140A peak range)
Frequency RangeDC to 1MHz (-3dB)
Rise Time0.35μs (Typ.)
Battery Type and Life, typical9V NEDA 1604A, IEC 6LR61
  8 hours minimum (1 each)
Max. Working Voltage
Max Floating Voltage
600V CAT III
600V CAT II
Cable Length 100 cm (3.3 feet)
Maximum Conductor Size 11 mm (0.43 inch)
Weight260 g (9.5 oz) (without battery)
  • An Insulated BNC/BNC lead, length 100cm
  • AC Adapter
  • Connector BNC to Banana
  • Instruction Manual

Back to the section
 

Please give us your feedback to help us improve our website

* - required fields

Compare and Choose your Benchtop Multimeter
Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2017