AKTAKOMOWON
TronexRIGOL
SPECIAL OFFERS!
AKTAKOM APS-73xxL - Best in Test Award Winner & Test Product of the Year!
LATEST ARRIVALS

APS-7305 DC Power Supply 150W 30V / 5A 1 channel programmable

Your shopping cart is empty
Absolute error of my measurement

"Absolute measurement error" service allows you to estimate the measurement accuracy considering uncertainty (error) in the absolute value. It’s important if you take measurements at the range edge when the error value contributes to the value displayed on the device screen.

To get the value range it’d be enough to enter the estimate of the value under measurement into Value input field and to see the range of possible values taking all of the standardized errors into consideration.

Note: a point is used as a separator of the integer and fractional part.

Software delivery

  • Power Cord

  • User Manual

AKTAKOM APS-7305 DC Power Supply 150W 30V / 5A 1 channel programmable
Click an image to enlarge
Brand: AKTAKOM
User's Guide: Download
RS-232 (Recommended Standard 232)

AKTAKOM APS-7305 DC power supply has a great protection capability and can protect a user’s device from getting burnt/damaged.

Retail price : $119.00

Estimated shipping cost $12 (Continental US only!)
Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

In stock now

Buy Add to cart

The AKTAKOM APS-7305 is the most economical programmable regulated DC power supply. Precision ad stability of APS-73xx series exceed a standard power supply. The great protection capability of this power supply can protect a user’s device from getting burnt/damaged.

Single channel economical programmable regulated power supply. Rated Output Voltage: 0~30V. Rated Output: Current: 0~5A. Resolution Voltage: 10mV. Resolution Current: 1mA (≤3A) / 2mA (>3A). Power Effect: Voltage: 0.01%+3mV. Power Effect: Current: 0.01%+3mA. Load Effect Voltage: 0.01%+3mV (≤3A) / 0.02%+5mV (>3A). Load Effect Current: 0.2%+3mA (≤3A) / 0.2%+5mA (>3A). Set Accuracy Voltage: ≤0.1%+20mV. Set Accuracy Current: ≤0.5%+5mA (≤3A) / ≤0.5%+10mA (>3A). Ripple (20Hz~20MHz) Voltage: ≤1mVrms (3A) / ≤2mVrms (>3A). Ripple (20Hz~20MHz) Current: ≤3mArms (3A) / ≤6mArms (>3A).

Features

  • The most economical programmable regulated power supply
  • High stability. Low Drift (<300ppm)
  • Offers lots of complex testing capabilities through computer controlling
  • Storage function
  • Switching on or off the output
  • Low Ripple and Noise
  • Over-voltage, over-current, over temperature protection
  • Powerful Strong Fan
  • Nominal Voltage 110V

Output voltage0...30 V
Output voltage accuracy0.1%+20 mV
Output voltage display resolution10 mV
Output current0...5 A
Output current accuracy≤0.5%+5 mA (≤3 A) / ≤0.5%+10 mA (>3 A)
Output current display resolution1 mA (≤3 A) / 2 mA (>3 A)
Output power150 W
Ripple and Noise≤1 mVrms (≤3 A) / ≤2 mVrms (>3 A)
Load stability0.01%+3 mV (≤3 A) / 0.02%+5 mV (>3 A)
Special featuresProgrammable, Memory
InterfaceRS-232
Display3 LED
Power supply110 V

Specifications:

  • Channels: Single Channel
  • Rated Output Voltage: 0~30V
  • Rated Output: Current: 0~5A
  • Resolution Voltage: 10mV
  • Resolution Current: 1mA (≤3A) / 2mA (>3A)
  • Power Effect: Voltage: 0.01%+3mV
  • Power Effect: Current: 0.01%+3mA
  • Load Effect Voltage: 0.01%+3mV (≤3A) / 0.02%+5mV (>3A)
  • Load Effect Current: 0.2%+3mA (≤3A) / 0.2%+5mA (>3A)
  • Set Accuracy Voltage: ≤0.1%+20mV
  • Set Accuracy Current: ≤0.5%+5mA (≤3A) / ≤0.5%+10mA (>3A)
  • Ripple (20Hz~20MHz) Voltage: ≤1mVrms (3A) / ≤2mVrms (>3A)
  • Ripple (20Hz~20MHz) Current: ≤3mArms (3A) / ≤6mArms (>3A)
  • Power Cord

  • User Manual

Operation instructions

  1. Output Voltage Adjustment: Press the key [VSET] and then the value of voltage setting will be displayed on the voltage display; and the place setted flickers. Repress and the selected place of the setting values will be changed. And turn the knob and the setting value of the output voltage will be adjusted when the setted place flickers. Stop turning for a few seconds, then the setted place stops flickering and the power will return to the initial status.
  2. Output Current Adjustment: Press the key [ISET] and then the value of voltage setting will be displayed on the voltage display; and the place setted flickers. Repress and the selected place of the setting values will be changed.
    And turn the knob and the setting value of the output voltage will be adjusted when the setted place flickers. Stop turning for a few seconds, then the setted place stops flickering and the power will return to the initial status.
  3. Over current protection: Press the key [RECALL] and the storage direction will flicker. At this time, press [OUTPUT] and it will stop flickering, when the power is in the mode of over current protection; that is, the over current protection starts when the current is up to the setted value; Switch off the output voltage and the over current protection light [OCP] is on. Eliminating the mode of the over current protection: press the key [RECALL] and the storage direction will flicker. At this time, press [OUTPUT] and it will stop flickering, when the power supplies will exit from the over current protection mode.
  4. Storage Selection: Press the key [STORE] and the storage direction light will flicker, which indicates the current storage data. Then press the key [ i ] and the next parameters of voltage and current can be selected; press [ t ] and the previous parameters can be selected. In any storage direction, the relevant storage units can be stored when the parameters of voltage and current are setted.
  5. Switching on or off the output: Press the key [OUTPUT] and the output voltage will be switched on or off.
1. Voltage display (Displaying setted voltage or output voltage display)
2. Current display (setted current display or output current display)
3. Storage data instruction (instructing storage data)
4. Adjusting knob (current and voltage adjusting knob)
5. Key store (storage-selected key)
6. ↑ (Selecting the next storage)
7. ↓ (Selecting the previous storage)
8. V SET (Voltage setting)
9. I SET (Current setting)
10. Key OUTPUT Switching on or off output voltage
11. ON/OFF button
12. Output port and grounding port
13. Fan
14. AC input socket

Frequently Asked Questions

  • How to change voltage and current values?

  • How to change voltage and current values?


    Up

    La fuente de poder AKTAKOM APS-7305 programable y regulable de un canal es la mas económica de todas. La precision y la estabilidad de la serie APS-73xx excede el estándar de las fuentes en general.

    Voltaje de salida: 0~30 V. Corriente: 0~5 A.
    Resolución del voltaje: 10 mV. Resolución de la Corriente: 1 mA (≤3A) / 2 mA (>3A).
    Potencia efectiva: Voltaje: 0.01% +3 mV. Corriente: 0.01% +3 mA.
    Carga Efectiva Voltaje: 0.01% +3 mV (≤3A) / 0.02% +5 mV (>3A).
    Corriente: 0.2% +3 mA (≤3A) / 0.2% +5 mA (>3A).
    Precisión de ajuste de voltaje: 0.1%+20 mV.
    Precisión de ajuste de corriente: ≤0.5% +5 mA (≤3A) / ≤0.5% +10 mA (>3A).
    Vibración (20Hz~20MHz) Voltaje: ≤1 mVrms (≤3A) / ≤2 mVrms (>3A).
    Vibración (20Hz~20MHz). Corriente: ≤3 mArms (≤3A) / ≤6 mArms (>3A).

    Esta fuente de poder tiene una gran capacidad de protección lo que permite proteger el dispositivo del usuario de quemarse o dañarse.

    Características

    • Es la fuente de poder más económica de suministro de energía programable
    • Alta estabilidad. Deriva baja (<300 ppm)
    • Ofrece muchas de las capacidades de pruebas complejas controladas por un computador
    • Función de almacenaje
    • Interruptor de salida
    • Vibración y ruido bajos
    • Protección de sobretensión, corriente y temperatura
    • Ventilador potente y muy fuerte

    Back to the section
     

    Please give us your feedback to help us improve our website

    * - required fields

    AKTAKOM AMM-4189 Digital Multimeter & Oscilloscope
    Site map | Privacy statement | Terms of Use & Store Policies | How to Buy | Shipping | Payment | © T&M Atlantic, Inc., 2010-2016
    Please click here to ask your question.

    If you've asked your question and is waiting for reply, click here.
    Please note: you must log in to ask your questions.