AKTAKOMOWON
TronexRIGOL
SPECIAL OFFERS!
AKTAKOM APS-73xxL - Best in Test Award Winner & Test Product of the Year!
LATEST ARRIVALS

APS-1305 DC Power Supply 150W 30V / 5A 1 Channel

Your shopping cart is empty
Absolute error of my measurement

"Absolute measurement error" service allows you to estimate the measurement accuracy considering uncertainty (error) in the absolute value. It’s important if you take measurements at the range edge when the error value contributes to the value displayed on the device screen.

To get the value range it’d be enough to enter the estimate of the value under measurement into Value input field and to see the range of possible values taking all of the standardized errors into consideration.

Note: a point is used as a separator of the integer and fractional part.

Software delivery

  • Power Cord

  • User Manual

AKTAKOM APS-1305 DC Power Supply 150W 30V / 5A 1 Channel
Click an image to enlarge
Brand: AKTAKOM
Warranty: 1 year
User's Guide: Download

Reliable DC power supply, can be widely used in factory production line. High Regulation. Low ripple and noise. 2 LED displays (voltage / current). Overload / reverse polarity / short circuit / overheat protection. 1 Channel; 30V, 5A

Retail price : $99.00

Estimated shipping cost $12 (Continental US only!)
Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Sold out

Notify when back in stock

AKTAKOM APS-1305 is a highly reliable constant voltage DC power supply. This kind of power supply can be widely used in factory production line, in the electronic circuit such as operational amplifier, digital logic circuit etc.

APS-1305 has 2 LED displays for current and voltage values accordingly:

  • voltage display accuracy: LED 1%2 byte
  • current display accuracy: LED 1%2 byte

Output terminal of AKTAKOM APS-1305 are 0.2 in / 4 mm banana jacks.

Features

  • Light and compact design, the power supply occupies very little working area.
  • High Regulation: 0.01%
  • Two LED displays
  • Constant Voltage and Constant Current Operation
  • Low ripple and noise
  • Overload and reverse polarity protection
  • Short circuit protection
  • Powerful strong fan and overheat protection
  • Ideal for educational laboratories. Safe for use
  • Nominal voltage 110V

Output voltage0...30 V
Output voltage accuracy±0.5% + 200 mV
Output voltage display resolution0.1 V
Output current0...5 A
Output current accuracy±0.5% + 20 mA
Output current display resolution0.01 A
Output power150 W
Ripple and Noise≤3 mVrms
Load stability≤0.1% + 5 mV (<3 A)
Display2 LED
Power supply110 V
Dimensions9.8 x 5.9 x 6.3 in

Specifications:

  • Channels: Single Channel
  • Rated Output Voltage: 0~30V (Adjustable)
  • Rated Output Current: 0~5A (Adjustable)
  • Rated Output Power: 150W
  • Voltage/Current Accuracy: ±0.5%rdg+2digits
  • Display resolution : 0.1V (Voltage) / 0.01A (Current)
  • Ripple And Noise: ≤3mVrms
  • Load Stability (<3A): ≤0.1%+5mV
  • Dimensions: 9.8 x 5.9 x 6.3 in / 260 x 150 x 160 mm
  • Power Cord

  • User Manual

Operation instructions

  1. Ensure that the power plug of this unit is connected to a 110V AC power outlet before using, switch the power ON, and adjust the (8)~(9) knobs to set the voltage to the desired value, and then plug your output cords into the output terminals (10)~(11), now the current meter (1) will show the current value.
  2. The limiting value of the output current is 3A or 5A depending upon the model, you must disconnect the power immediately when the over load indicator (6) is on.
  3. Setting of current limiting.
    - Use a short-circuit wire to short the current terminals (+) to (-).
    - Adjust the current knob untill the CC indicator is on.
    - Adjust the current knob to the desired value (4) & (5).
    - Take off the short circuit wire.
(1) Current meter: displays output current value
(2) Voltage meter: displays output voltage value
(3) Power switch: control the power
(4) Output current fine knob
(5) Output current course knob
(6) Constant current mode indicator
(7) Constant voltage mode indicator
(8) Output voltage coarse knob
(9) Output voltage fine knob
(10) Power output “-” terminal
(11) Output “+” terminal
(12) Ground (Earth terminal)

Frequently Asked Questions

  • May I use AKTAKOM power supplies to charge accumulators?

  • May I use AKTAKOM power supplies to charge accumulators?

    AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.


    Up

    La fuente de poder AKTAKOM APS-1305 es una fuente de corriente continua de alta fiabilidad y de voltaje constante. Tiene características tales como limite de corriente protección por voltaje bajo y protección de cortocircuito. Puede ser ampliamente utilizado en las líneas de producción de las fábricas.

    La fuente de poder de corriente directa es de un canal. Voltaje nominal de 0 a 30V (ajustable). Corriente nominal 0~5 A (ajustable). Potencia nominal 150 W. Precisión Tensión/Corriente ± 0.5% lectura + 2 dígitos. Pantalla de dos Leds con una resolución de 0,1 V (voltaje) / 0,01 A (actual). Vibración y ruido: ≤ 3 mVrms. Carga de Estabilidad (<3 A): ≤ 0,1% 5 mV. Dimensiones: 260x150x160 mm / 9.8"x5.9"x6.3"

    Características

    • Diseño ligero y compacto
    • 0.01% Regulación de alta
    • Pantalla con 2 Leds indicadores
    • Regimen de operación constante de voltaje y corriente
    • Baja vibración y ruido
    • Protección de sobrecarga y polaridad invertida
    • Limite de corriente por bajo voltaje y protección de cortocircuito
    • Ventilador de potencia alta y protección por temperatura alta
    • Ideal para Laboratorios educativos. Muy seguro para su uso

    Back to the section
     

    Please give us your feedback to help us improve our website

    * - required fields

    AKTAKOM AMM-4189 Digital Multimeter & Oscilloscope
    Site map | Privacy statement | Terms of Use & Store Policies | How to Buy | Shipping | Payment | © T&M Atlantic, Inc., 2010-2016