AKTAKOMOWON
TronexRIGOL
SPECIAL OFFERS!
AKTAKOM APS-73xxL - Best in Test Award Winner & Test Product of the Year!
LATEST ARRIVALS

ADS-2062M Digital Storage Oscilloscope 60MHz 1GSa/s

Your shopping cart is empty
Absolute error of my measurement

"Absolute measurement error" service allows you to estimate the measurement accuracy considering uncertainty (error) in the absolute value. It’s important if you take measurements at the range edge when the error value contributes to the value displayed on the device screen.

To get the value range it’d be enough to enter the estimate of the value under measurement into Value input field and to see the range of possible values taking all of the standardized errors into consideration.

Note: a point is used as a separator of the integer and fractional part.

Software delivery

Included:

  • Passive Probes x 2

  • Power Cord

  • USB Cable


    Optional:

    • BNC Cable

    • USB Data Cable

    • RS232 Cable

    • USB-GPIB Adapter


    The software in the standard package of the device has no physical media (CD) and can be downloaded at www.tmatlantic.com after the purchasing and registering the equipment with a serial number. This software is paid-for and its cost is included into device value. In the new version of the software, when connecting the unit for the first time, it will ask for a license (access key). It is available online after product registration. Insert the entire character set by coping and pasting it from www.tmatlantic.com. Follow the instructions on the site. We recommend that you make and keep a copy of the downloaded software. Follow our websites news releases to receive software updates.


    Recording your Software on CD

    AKTAKOM ADS-2062M Digital Storage Oscilloscope 60MHz 1GSa/s
    Click an image to enlarge
    Brand: AKTAKOM
    Warranty: 3 years
    User's Guide: Download
    Installation Guide: Download
    USB Host RS-232 (Recommended Standard 232)

    High functionality of AKTAKOM ADS-2062M benchtop digital storage oscilloscope allows a wide range of tasks such as production process as well as design and maintenance.

    Retail price : $719.00
    Discount price: $659.00
    You save: $60

    Free shipping for orders over $450
    on items weighting under 20 lbs
    (certain restrictions apply!)

    See shipping page for international rates
    or contact sales@tmatlantic.com

    Sold out

    Pre-order

    Digital storage oscilloscopes by AKTAKOM ADS-2xxx series with Unique 7” wide-screen Color TFT LCD display have high real-time sampling rate up to 1GSa/s. ADS-2xxx digital oscilloscopes with M index have high memory depth, that allows them to register more durable signal than standard digital oscilloscopes. High functionality of AKTAKOM ADS-2062M benchtop digital storage oscilloscope allows a wide range of tasks such as production process as well as design and maintenance.

    Features

    • Unique 7” wide-screen Color TFT LCD display
    • 2 Mpts Max Memory depth 
    • Abundant trigger function
    • 32 parameters Auto measure function
    • Max recording length: 6 Mpts 
    • The longest single recording time: 33.3h
    • User interface in 12 languages
    • 6-digit Hardware Frequency Counter
    • Support Pass/Fail function
    • PictBridge Function
    • Powerful Easyscope Software for PC
    • Interfase USB 2.0 Host FAT32 & USB 2.0 Device, RS-232
    • Power Supply 110-220 V

    Please click to learn how it works. ADS App Software PDF file

    Special Offer HOT AKTAKOM: Buy any digital oscilloscope and receive discount on select Aktakom Multimeters, Clamp Meters, LCR Meters and Thermometers. Call 786-597-7752 to learn more and to place an order.

    Bandwidth60 MHz
    Sample rate1 GSa/s
    Memory depth2 Mpts max., 1 Mpts dual channel
    Trigger typesEdge trigger, Pulse width trigger, Video signal trigger, Slope trigger, Alternative trigger
    Number of automatic measurements32
    Automatic measurementVpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms (Cycrms), Vrms, ROVShoot, FOVShoot, RPREshoot, FPREshoot, Rise Time, Fall Time, Frequency, Period, +Wid, -Wid, +Duty, -Duty, BWid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF
    Waveform mathAddition (+), Subtraction (-), Multiplication (*), Division (/), FFT (fast Fourier transform)
    InterfaceUSB Host, USB Device, RS-232
    Display7” color TFT LCD 480×234 pixels, 64K colors
    Power supply110...240 VAC
    Dimensions15.7 x 4.3 x 5.8 in

    Specifications Table:


    Input CouplingAC, DC, GND
    Input Impedance1MΩ±2% || 17pF±3pF
    Maximum input voltage400V (DC+AC PK-PK, 1MΩ input impedance), CAT I, CAT II
    Probe attenuator1X, 10X
    Probe attenuator Factors Set1X, 10X, 100X, 1000X

    Horizontal System:

    Real Time Sampling Rate4Kpts memory depth Series:
      Single Channel: 500MSa/s, Double Channel: 250MSa/s (When time base faster than 250ns/div)
    32K/40K/2Mpts memory depth Series:
      Single Channel: 1GSa/s, Double Channel: 500MSa/s (When time base faster than 50ns/div)
    5Kpts/CH memory depth Series: 1GSa/CH
    18K/24Kpts memory depth Series: 2GSa/CH
    Equivalent Sampling Rate50GSa/s (40MHz bandwidth: 25GSa/s; 25MHz bandwidth: 10GSa/s)
    Measure Display ModesMAIN, WINDOW, WINDOW ZOOM, SCAN, X-Y
    Time base Accuracy Horizontal Scan Range±100ppm measured over 1ms interval
    1/2.5/5/10/25ns/div - 50s/div (According to the Bandwidth)
    SCAN: 100ms/div - 50s/div (1-2.5-5 sequence)

    Vertical System:

    Vertical Sensitivity4K/15K/118K/124Kpts memory depth Series:
      2mV/div - 5V/div (1-2-5 order)
    32K/140K/2Mpts memory depth Series:
      2mV/div - 10V/div (1-2-5 order)
    Channel Voltage Offset Range4K/5K/18K/24Kpts memory depth Series: 2mV-100mV: ±2V
      102mV-5V: ±40V 
    32K/40K/2Mpts memory depth Series: 2mV-200mV: ±1.6V
      206mV-10V: ±40V
    Vertical Resolution8 bit
    Channels2
    Analog Bandwidth60MHz
    Single-shot Bandwidth60MHz
    Lower frequency limit (AC-3dB)≤10Hz (at input BNC)
    DC Gain Accuracy≤±3.0%: 5mV/div to 10mV/div in Fixed Gain Ranges
    ≤±4.0%: typical for 2mV/div and Variable Gain Ranges
    DC Measurement Accuracy: All Gain settings ≤100mV/div ± [3%X(|reading|+|offset|)+1% of |offset|+0.2div+2mV]
    Rise time<5.8ns bandwidth at 60MHz
    Vertical input couplingAC, DC, GND
    Math operation(+),( -), (*), (/), FFT

    FFT

    Window mode: Hanning, Hamming, Blackman, Rectangular
    Sampling points: 1024
    Digital storage oscilloscope20MHz±40% Typical
    (Note: 25MHz bandwidth oscilloscope don't have this function, BW limited below 20MHz±40% when using probe X1)

    Measure System:

    Automatic measurement (32 Types) Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time, Freq, Period+Wid, -Wid, +ut, -Dut, Bwid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF
    Cursor MeasureManual mode, Track mode and Auto mode

    Trigger System:

    Trigger TypesEdge, Pulse Width, Video, Slope, Alternative
    Trigger SourceCH1, CH2, EXT, EXT/5, AC Line
    Trigger ModesAuto, Normal, Single
    Trigger CouplingAC, DC, LF rej, HF rej
    Trigger Level RangeCH1, CH2, CH3, CH4: 6divisions from center of screen
    EXT: 1.2V
    EXT/5: 6V
    Trigger DisplacementPre-trigger: (Memory depth / (2*sampling))
    Delay Trigger: 260div
    Holdoff range100ns~1.5s
    Edge TriggerEdge type: Rising, Falling, Rising and Falling
    Pulse Width TriggerTrigger Modes: ( > , <, = ) Positive Pulse Width, ( >, <, = ) Negative Pulse Width
    Pulse Width Range: 20ns~10s
    Video TriggerSupport signal Formats: PAUSECAM, NTSC
    Trigger condition: odd field, even field, all lines, line Num
    Slope Trigger( > , <, =) Positive slope, ( > , <, =) Negative slope
    time: 20ns-10s
    Alternative TriggerCH1, CH2, CH3, CH4 trigger type:Edge, Pulse, Video, Slope

    Specifications List:

    • Channels: Dual channels + external trigger
    • Analog Bandwidth: 60MHz
    • Real-time Sample rate: Max. 1GSa/s (500MSa/s each channel)
    • Equivalent Sample rate: 50GSa/s
    • Max Memory Depth: 2Mpts for single channel (1Mpts double ?hannel)
    • Acquisition: Normal, Average (4…256), Peak Detect (10ns)
    • Input coupling: DC, AC, GND
    • Max. input voltage: 400Vpk (DC+AC, 1MΩ)
    • Input impedance: 1MΩ±2%||17pF±3pF
    • Interpolation: Sin(x)/x, Linear
    • Horizontal Scale (s/div): 5ns/div~50s/div
    • Rise time: ≤5.8ns
    • Vertical sensitivity: 2mV/div~10V/div (at BNC input)
    • Vertical Resolution: 8 bit
    • DC Gain Accuracy: ±4% (2mV/div), ±3% (5mV/div~5V/div)
    • Waveform math: +, -, ×, Inverted
    • FFT: 4 windows (Rectangle, Hanning, Hamming, Blackman). Sampling points: 1024
    • Automatic measurement (32 types): Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time, Freq, Period, +Wid, -Wid, +Dut, -Dut, Bwid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF
    • Cursor measurement: Manual mode, Track mode and Auto mode
    • Save/Recall: Support 2 Group referenced Waveforms, 20 Group setups, 20 Group captured Waveforms internal Storage/Recall function and USB flash driver storage function
    • Trigger mode: Auto, Normal, Single
    • Trigger type: Edge, Pulse, Video, Slope, Alternate
    • Trigger sources: CH1, CH2, EXT, EXT/5, AC Line
    • Trigger Coupling: AC, DC, LFrej, HFrej
    • Trigger Level Range: CH1, CH2: ±6 divisions from center of screen EXT: ±1.2V, EXT/5: ±6V
    • Recorder: 6 M
    • Waveform Record: Max 1500 frames
    • Interface: USB device, USB host, RS-232
    • Display Type: 7” color TFT LCD, 480x234 pixels, 64K colors
    • Wave display range: 8x18div
    • Power Supply: 100-240VAC, CAT II; 45Hz to 440Hz; 50VA Max
    • Dimension: 15.7x4.3x5.8in/399x110.5x148.5mm
    • Weight: 5.3lb/2.4kg

    Included:

    • Passive Probes x 2

    • Power Cord

    • USB Cable


      Optional:

      • BNC Cable

      • USB Data Cable

      • RS232 Cable

      • USB-GPIB Adapter


      The software in the standard package of the device has no physical media (CD) and can be downloaded at www.tmatlantic.com after the purchasing and registering the equipment with a serial number. This software is paid-for and its cost is included into device value. In the new version of the software, when connecting the unit for the first time, it will ask for a license (access key). It is available online after product registration. Insert the entire character set by coping and pasting it from www.tmatlantic.com. Follow the instructions on the site. We recommend that you make and keep a copy of the downloaded software. Follow our websites news releases to receive software updates.


      Recording your Software on CD

      Taking Simple Measurements

      Observe a unknown signal in a circuit, display the signal quickly and measure the frequency and peak-to-peak amplitude.

      1. Using Auto set

      To quickly display a signal, follow these steps:

      • Press the CH1 button, set the Probe option attenuation to 10X and set the switch to 10X on the probe.
      • Connect the channel 1 probe to the signal.
      • Press the AUTO button.

      The oscilloscope sets vertical, horizontal, and trigger controls automatically. If you want to optimize the display of the waveform, you can adjust these controls manually till you are satisfied with the waveforms.
      Note: The oscilloscope displays relevant automatic measurements in the waveform area of the screen based on the signal type detected.

      2. Taking Automatic Measurements

      The oscilloscope can take automatic measurements of most displayed signals. To measure signal frequency and peak-to-peak amplitude, follow these steps:

      (1) Measure signal frequency

      • Input the signal to channel 1.
      • Press the AUTO button.
      • Press the MEASURE button to see auto Measure Menu.
      • Press the top option button.
      • Press the Time option button to enter the Time Measure menu.
      • Press the Source option button to select input signal channel.
      • Press the Type option button to select Freq.
        The corresponding icon and measure value will display on the third option area.

      (2) Measure signal peak-to-peak amplitude

      • Press the MEASURE button to display auto measure menu.
      • Press the top second option button.
      • Press the Voltage option button to enter the Voltage measure menu.
      • Press the Source option button to select input signal channel.
      • Press the Type option button to select Vpp.
        The corresponding icon and measure value will display on the third option area.

      Taking Cursor Measurements

      You can use the cursors to take time and voltage measurements of a waveform quickly.

      Measuring Ring Frequency

      To measure the ring frequency at the rising edge of a signal, follow these steps:

      • Press the CURSORS button to see the Cursor Menu.
      • Press the Mode button to select Manual.
      • Press the Type option button and select Time.
      • Press the Source option button and select CH1.
      • Press the Cur A button and turn the universal knob to place the cursor A on one peak of the ring.
      • Press the Cur B button and turn the universal knob to place the cursor B on the nearest peak of the ring.

      You can see the delta time and frequency (the measured ring frequency) on the top left of the screen.

      Measuring Ring Frequency

      Measuring Ring Amplitude

      To measure the amplitude, follow these steps:

      • Press the CURSORS button to see the Cursor Menu.
      • Press the Mode button to select Manual.
      • Press the Type option button and select Voltage.
      • Press the Source option button and select CH1.
      • Press the Cur A option button and turn the universal knob to place the cursor A on the highest peak of the ring.
      • Press the Cur B option button and turn the universal knob to place the cursor B on the lowest peak of the ring.

      You can see the following measurements on the top of the left screen:

      • The delta voltage (peak-to-peak voltage of the ringing)
      • The voltage at Cursor A.
      • The voltage at Cursor B.

      Measuring Ring Amplitude

      Catch the single signal

      To capture a single event, you need to gather some pre-test knowledge of the signal in order to correctly set up the trigger level and slope. If you are not sure the instance of the signal, you can observe it through auto or normal trigger mode to ensure the trigger level and slope.

      The following steps show you how to use the oscilloscope to capture a single event.

      1. Set the Probe option attenuation to 10X and set the switch to 10X on the probe.
      2. Trigger set up:

      • Press “TRIG MENU” button to show the “Trigger Menu”
      • Under this menu, set the trigger type to “edge”, Edge type is “Rising”, source is “CH1”, trigger mode is “Single”, coupling is “DC”
      • Adjust the horizontal time base and vertical scale to the satisfied range
      • Turn the “LEVEL” knob to adjust the trigger level
      • Press the “RUN/STOP” button to start capturing

      When the trigger conditions are satisfied, data appears on the display representing; the data points that the oscilloscope obtained with one acquisition and press the RUN/STOP button again rearms the trigger circuit and erases the display.

      Analyze the signal detail

      You have a noisy signal displayed on the oscilloscope and you need to know more about it. You suspect that the signal contains much more detail than you can now see in the display.

      Looking at a Noisy Signal

      The signal appears noisy and you suspect that noise is causing problems in your circuit. To analyze the noise better, follow these steps:

      • Press the ACQUIRE button to see the acquire menu.
      • Press the Acquisition option button or turn the Universal knob to select Peak Detect.
      • If necessary, press the DISPLAY button to see Display menu. Turn the Universal knob to adjust waveform intensity and grid brightness to see the noise more clearly.
      • Peak detect emphasizes noise spikes and glitches in your signal, specially when the time base is set to a slow setting.

      Separating the Signal from Noise

      To reduce random noise in the oscilloscope display, follow these steps:

      • Press the ACQUIRE button to display the acquire menu.
      • Press the Acquisition option button or turn the Universal knob to select Average.
      • Press the Averages option button to see the effects of varying the number of running averages on the waveform display.

      Averaging reduces random noise and makes it easier to see the details of a signal.

      Triggering on a Video Signal

      Observe the video circuit in a piece of medical equipment and Use the video trigger to obtain a stable display.

      Triggering on Video Field

      To trigger on the video fields, follow these steps:

      • Press the TRIGGER MENU button to see trigger menu
      • Press the top option button and select Video.
      • Press the source option button and select Ch1.
      • Press the Sync option button and select Odd Field or Even Field.
      • Press the Standard option button and select NTSC.
      • Turn the horizontal S/Div knob to see a complete field across the screen.
      • Turn the vertical Volts/Div knob to ensure that the entire video signal is visible on the screen.

      Triggering on Video Lines

      To trigger on the video lines, follow these steps:

      • Press the TRIGGER MENU button to see the trigger menu
      • Press the top option button and select Video.
      • Press the Sync option button and select Line Num and turn the universal knob to set a specific line number.
      • Press the Standard option button and select NTSC.
      • Turn the S/Div knob to see a complete video line across the screen.
      • Turn the Volts/Div knob to ensure that the entire video signal is visible on the screen.

      Application of X-Y function

      Viewing Impedance Changes in a Network

      Connect the oscilloscope to monitor the input and output of the circuit. To view the input and output of the circuit in an X-Y display, follow these steps:

      • Press the CH1 MENU button and set the Probe option attenuation to 10X.
      • Press the CH2 MENU button and set the Probe option attenuation to 10X.
      • Set the switch of the probe to 10X.
      • Connect the channel 1 probe to the input of the network, and connect the channel 2 probe to the output.
      • Press the AUTO button.
      • Turn the Volts/div knobs to display approximately the same amplitude signals on each channel.
      • Press the DISPLAY button.
      • Press the Format option button and select XY.

      The oscilloscope displays a Lissajous pattern representing the input and output characteristics of the circuit.

      • Turn the VOLTS/DIV and VERTICAL POSITION knobs to optimize the display.
      • Press the Persist option button and select Infinite.
      • Press the Intensity or Brightness option buttons and turn the Universal” knob to adjust the contrast of the screen.
      • Apply the Ellipse method to observe the phase difference between the two channels

      Application of X-Y function

      Sin=A/B or C/D where =phase shift (in degrees) between the two signals from the formula above, you could get:=arcsine(A/B) or arcsine(C/D). If the main axis of the ellipse is at I and IV quadrant, must be in the range of (0~π/2) or (3π/2~2π). If the main axis is at II and III quadrant, must be in the range of (π/2~π) or (π~3π/2).

      Analyzing a Differential Communication Signal

      You are having intermittent problems with a serial data communication link, and you suspect poor signal quality. Set up the oscilloscope to show you a snapshot of the serial data stream so you can verify the signal levels and transition times.

      Because this is a differential signal, you use the math function of the oscilloscope to view a better representation of the waveform.

      To activate the differential signals connected to channel 1 and channel 2, follow these steps:

      • Press the CH1 button and set the Probe option attenuation to 10X.
      • Press the CH2 button and set the Probe option attenuation to 10X.
      • Set the switches to 10X on the probes.
      • Press the AUTO button.
      • Press the MATH button to see the Math Menu.
      • Press the Operation option button and select - .
      • Press the CH1-CH2 option button to display a new waveform that is the difference between the displayed waveforms.
      • You can adjust the vertical scale and position of the Math waveform.
        To do so, follow these steps:
        A. Remove the channel 1 and channel 2 waveforms from the display.
        B. Turn the CH1 and CH2 VOLTS/DIV and VERTICAL POSITION knobs to adjust the vertical scale and position.

      Note: First be sure to compensate both probes. Differences in probe compensation appear as errors in the differential signal.

      Frequently Asked Questions

    • After the Acquisition is set to "Averages" or Display Persistence is set ON, the waveform refreshes slowly
    • The signal is displayed as ladder like waveform
    • How to change from Chinese to English my ADS-2022 /2042 /2062 /2102 /2152
    • High voltage measurement testing are not allowed over 300 volts
    • Driver does not install or I can't find where it is located?
    • After the oscilloscope is powered on the display remains dark, what should I do?
    • The measured voltage amplitude value is 10 times greater or smaller than the actual value
    • When changing the horizontal sweep on the digital oscilloscope at different horizontal points observed inexplicable change in the form of the same signal, why is this happening?
    • How to save data in a USB Flash Drive
    • There is wave form displayed, but it is not stable

    • After the Acquisition is set to "Averages" or Display Persistence is set ON, the waveform refreshes slowly

      It is normal in these settings.
      Up

      The signal is displayed as ladder like waveform

      1. The time base setting maybe is too slow. Turn the horizontal SCALE knob to increase horizontal resolution.
      2. Maybe the display Type is set to "Vectors". Set it to "Dots" mode.

      Up

      How to change from Chinese to English my ADS-2022 /2042 /2062 /2102 /2152

      Please press the button DEFAULT SETTUP to be sure your ADS-2022 Oscilloscope is at MENU first page. You shall see same chinese symbols as shows in a picture above.

      Now press the button UTILITY to display the first menu page at the screen.

      Finally press the button #1 and choose English or a different language by using knob #2.


      Up

      High voltage measurement testing are not allowed over 300 volts

      Even when you can read in a probe 600V PK CAT I. The Aktakom, Owon or Rigol oscilloscopes does not support more than 300V RMS or 400V PK. For higher voltage please contact us to request a special device.


      Up

      Driver does not install or I can't find where it is located?

      Hereby we confirm that the Easyscope software is 32-bit and 64-bit. So if you need help do not hesitate to contact us.

      IT Department


      Up

      After the oscilloscope is powered on the display remains dark, what should I do?

      Please implement the following fault treatment procedure.

      • Check whether the power cable is connected properly.
      • Ensure the power switch is turned on.
      • Restart the instrument after completing the checks above.
      • If the oscilloscope still can not work normally, please call for service.

      Up

      The measured voltage amplitude value is 10 times greater or smaller than the actual value

      Check whether the channel attenuation coefficient and the attenuation coefficient of the probe used is match.
      Up

      When changing the horizontal sweep on the digital oscilloscope at different horizontal points observed inexplicable change in the form of the same signal, why is this happening?

      In fact, this is not a problem.

      Just keep in mind that you're using a digital oscilloscope, which digitizes the signal with different sampling rates depending on the selected horizontal sweep, and then connects the digitized points with strait line while restoring the real shape of the signal.

      Your first screen shows that you are measuring voltage 50 Hz with the 10 ms / div sweep and a sampling frequency of 20 kHz Ks/s

      One signal period (20 ms), digitized in this mode, 20E-03 (sec) * 20E03 (1/sec) = 400 points. This is enough to properly restore and interpolate a sine wave of 50 Hz (i.e. in a period of 20 ms).

      Normal display, with a sweep 10 ms / div:

      Distortion of the same signal at 10 s / div sweep

      Your second screen is set to sweep 10 sec / div, and sample rate on a sweep turned to 20 samples per second (20 Sa / s). I.e. one signal period 20 ms had: 20E-03 (sec) * 20 (1/sec) = 0.4 points. That means that to restore (to interpolate the points) a sine wave with less than one point in time is impossible, so you get this mess (known as "aliasing" or a false frequency) formed by the beats of the measured frequency and sampling frequency.

      In order to correctly install a data collection in a digital oscilloscope one should follow a simple rule - the sampling rate must be at least 5-10 times higher than the frequency signal, in that case you will not have the issues that we just discussed.

      This applies to all digital oscilloscopes and in no way connected to any particular make or model of oscilloscope or its probes.


      Up

      How to save data in a USB Flash Drive

      This oscilloscope allows you to save data to an external USB Flash Drive only if the drive is formatted with FAT32.

      If you haven't noticed one huge change with Windows 7 is that FAT32 is no longer an option on formatting drives. You are now left with the options of either NTFS or exFAT. OK so your asking what is exFAT? Well its not FAT32, acutally its compatible with FAT64.

      So let's Format external USB Flash drive with FAT32 using DOS

      First you need to find what your Hard Drive is named (the label) that is easy to do right click on the hard drive and it will show you in the top box. As you can see mine has no level in the picture bellow. You also need to note which drive letter it is. Mine is Drive: G

      Next thing you need to do is to find your command prompt

      Once you get to command prompt you will need to type this:

      format /FS:FAT32 G:

      Note: You need to change the letter G to the letter of your drive

      Then just answer the questions as you like for a volume label, etc. It will take time according to the driver size.

       

      Now for more information of "How to Save and Recall a Waveform details" go to equipment User's Guide or find it by the following links:

      • For the ADS-2061M go to PDF page 53 (49 if printed) and do not forget that a USB Flash Drive is an external memory. See User's Guide.
      • For all other ADS models (2022, 2042M, 2061M, 2062 & M, 2102 & M, 2152 & M) go to PDF page 42 (74 if printed) See User's Guide

      Up

      There is wave form displayed, but it is not stable

      • Check whether the Source item in the TRIG MODE menu is in conformity with the signal channel used in the practical application.
      • Check on the trigger Type item: The common signal chooses the Edge trigger mode for Type and the video signal the Video. Only if a proper trigger mode is applied, the wave form can be displayed steadily.
      • Try to change the trigger coupling into the high frequency suppress and the low frequency suppress to smooth the high frequency or low frequency noise triggered by the interference.

      Up

      Easy Scope Software version 3.0 USB

      Learn more...

      La serie de Osciloscopios digitales ADS-AKTAKOM 2??? es única; con una pantalla a color TFT LCD de 7" de ancho y una alta velocidad de muestreo en tiempo real de 1GSa/s (500 MSa/s. La serie de Osciloscopios ADS-2xxx con el índice M tienen una profundidad de memoria mas alta, que les permite registrar la señal más duradera que los osciloscopios standard. La Alta funcionalidad de estos osciloscopios permite una amplia gama de tareas tales como producción, diseño y mantenimiento.

      Características

      • Pantalla TFT LCD ancha a color de 7”
      • Memoria Maz de 2 Mpts de profundidad
      • Función amplia de gatillado
      • 32 parámetros de la función de Auto medición
      • Max largo de grabación: 6Mpts
      • Max tiempo de grabación: 33.3 h
      • Interfaz de usuario en 12 idiomas
      • Contador de frecuencia de 6 digitos
      • Soporta función de Pass/Fail
      • Function PictBridge
      • Software EasyScope de gran alcance para PC
      • Interface USB 2.0 Host FAT32 & USB 2.0 Device, RS232
      • Fuente de Poder 110 -220 V

      Back to the section
       

      Please give us your feedback to help us improve our website

      * - required fields

      AKTAKOM - the Best in Test Award Winner!
      Site map | Privacy statement | Terms of Use & Store Policies | How to Buy | Shipping | Payment | © T&M Atlantic, Inc., 2010-2016
      Please click here to ask your question.

      If you've asked your question and is waiting for reply, click here.
      Please note: you must log in to ask your questions.