Español

ATK-6010 Phase Interlacing Pointer

AKTAKOM ATK-6010 Phase Interlacing Pointer
Click an image to enlarge
Brand: AKTAKOM
User's Guide: Download

Phase interlacing pointer capable of determining phase interlacing when connecting to three-phase receivers

Retail price : $42.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

In stock now

Buy Add to cart

AKTAKOM ATK-6010 phase interlacing pointer is capable of determining phase interlacing when connecting to three-phase receivers (asynchronous / synchronous motors, driver, protectors, counters etc.). ATK-6010 has a pointer indicator which acts in case of voltage availability in the network. It’s protected with a fuse, can be easily put into your pocket and weights 0.6 lb only.

Dimensions2.8 x 3.7 x 2.1 in / 70 x 95 x 55 mm

Specifications:

  • Voltage range: 110...480 V;
  • Frequency range: 40...70 Hz.
  • Test time:
    • 480 V - 4 min.
    • 220 V - 30 min.
    • 110 V – long time.
  • Insulation dielectric strength: 2000 V;
  • Insulation resistance: 100 MΩ.
  • Test leads length: 1.2 m.
  • Deviation: ±15° (horizontal).
  • Fuse: 0.5A / 700V.
  • Power supply: from the circuit under test.
  • Dimensions: 2.8 x 3.7 x 2.1 in / 70 x 95 x 55 mm.
  • Weight: 0.6 lb / 280 g.

Standard accessories:

  • Fuse
  • User manual
  • Carrying case

Frequently Asked Questions

  • How can I make sure that AKTAKOM ATK-6010 phase interlacing pointer operates correctly?

  • How can I make sure that AKTAKOM ATK-6010 phase interlacing pointer operates correctly?

    In order to check the correct operation of AKTAKOM ATK-6010 phase interlacing pointer connect it to the network with the correct phase sequence and make sure the pointer turns in the line of the arrow.

    1. Connect ATK-6010 to the phases of three-phase network with the test leads and alligator clips.
    2. If the pointer turns in the line of the arrow the order of sequence is as follows: R (red) – S (yellow) – T (Green).

    ATK-6010 can be also used in the horizontal condition (slope angle is ±15° at max.). Failure to meet this condition can cause the turning pointer defect and wrong test results.


    Up


    Back to the section
     

    Please give us your feedback to help us improve our website

    * - required fields

    AKTAKOM APS-730xL series power supplies
    Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2017