Español

ATE-9380 Thermometer Monitor

AKTAKOM ATE-9380 Thermometer Monitor
Click an image to enlarge
Brand: AKTAKOM
Warranty: 1 year
USB (through interface converter) RS-232 (Recommended Standard 232)

Retail price : $139.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Sold out

Subscribe

AKTAKOM ATE-9380 is a monitor with real time SD memory card datalogger.

Features:

  • Monitor with real time datalogger which saves the measuring data along the time information (year, month, date, hour, minute, second) into the SD memory card and can be downloaded to the Excel without any extra software, users can make the further data or graphic analysis by themselves.
  • Show 3 channels ( T1, T2, T3 ) Temp. value in the same LCD
  • Type K Thermometer: -100 to 1300 °C, °C/°F
  • SD card capacity: 1 GB to 16 GB
  • Sampling adjustment: 5/10/30/60/120/300/600 seconds and auto function
  • Large LCD display, easy readout
  • Microcomputer circuit, high accuracy
  • Low power consumption and long battery life when the battery power is used
  • DC 1.5V (UM-4, AAA) battery x 6 PCs or DC 9V adapter
  • Interface: RS-232, USB via interface converter
  • Type K probe, TP-01 x1 PC is included
  • Patented

Temperature sensor typeType K thermocouple
InterfaceUSB (through interface converter), RS-232

Specifications:

General Specifications:

Circuit: Custom one-chip of microprocessor LSI circuit

Display: LCD size: 2.4in x 2in / 60mm x 50mm

Measurement: Type K thermometer, °C or °F

Memory Card: SD memory card, 1 GB to 16 GB

Datalogger / Sampling Time:

5/10/30/60/120/300/600 seconds or Auto.

  • Default sampling time is 60 seconds.
  • The " Auto " sampling . means when the measuring value is changed ( >± 1 ) will save the °C data one time only

Data error no.: ≦ 0.1 % no. of total saved data typically

Advanced settings:

  • SD memory card Format
  • Set clock time (Year/Month/Date, Hour/Minute/Second)
  • Set sampling time
  • Set beeper sound ON/OFF
  • Set SD card Decimal character
  • Select the Temp. unit to °C or °F
  • Set RS232 data output ON/OFF

Temperature Compensation: Automatic temp. compensation for the type K thermometer

Update Time of Display: Approx. 1 second if measuring data is changed

Data Output:

RS-232 serial interface capable of PC connection via USB with Aktakom ACE-1025 interface converter and wide data processing capabilities with ADLM-W software or ASDM and ASDL applications Windows and Android based respectively.

    Operating temperature: 0 to 50 °C

    Operating humidity: Less than 85% R.H.

    Power supply:

    • Alkaline or heavy duty DC 1.5 V battery (UM4, AAA) x 6 PCs, or equivalent
    • DC 9V adapter input (AC/DC power adapter is optional)

    Battery life: If you use a new battery (alkaline type) and sampling time is set to 60 seconds the battery life will be typically more than one month

    Electrical specifications (23±5 ℃):

    Type K thermometer:

    Range Resolution Accuracy
    -50.0 to 1300.0 °C 0.1 °C ±(0.5 % + 0.5 °C)
    -50.1 to -100.0 °C ±(0.5 % + 1 °C)
    -58.0 to 2372.0 °F 0.1°F ±(0.5 % + 1°F)
    -58.1 to -148.0 °F ±(0.5 % + 1.8°F)

    Above specification tests under the environment RF Field Strength, less than 3 V/M & frequency less than 30 MHz only

    Weight: 0.44 LB / 199 g

    Dimensions: 5.2in x 3.1in x 1.3in / 132mm x 80mm x 32mm

    General accessories:

    • Instruction manual.
    • Type K Temp. probe, TP-01
    • Hanging unit (with sticker)

    Optional accessories:

    • SD Card (2 GB)
    • Type K thermocouple probe
    • AC to DC 9V adapter
    • USB cable, USB-01
    • RS232 cable, UPCB-02
    • Data Acquisition software, SW-U801-WIN

    ATE-9380 Thermometer monitor measuring procedure

    1. Install the batteries into the battery compartment:
      *Loose the Screw of the battery cover and take away the Battery Cover from the meter.
      *Replace with DC 1.5 V battery (UM4/AAA, Alkaline/Heavyduty type) x 6PCs, and reinstate the cover.
      *Make sure the battery cover is secured after changing the battery.
    2. Insert the plug of Temp. probe ( For example the included Temp. probe, TP-01 into the T1 Temp. probe input socket).
      If you have other Temp. probes, then plug its plug to T2 Temp. probe input socket or T3 Temp. probe input socket.
      Note:
      *If plug one Temp. probe to the meter, will show the one channel ( T1 ) Temp. only.
      *If plug two Temp. probes to the meter, will show the two channels Temp. ( T1, T2 ).
      *If plug three Temp. probes to the meter, will show total three channels Temp. ( T1, T2, T3 ).
    3. Display will show the temperature value ( T1, T2, T3 ) that sensing from Temp. probe.
      Note
      :
      *The up Display value will present the T1 temperature value.
      *The middle Display value will present the T2 temperature value.
      *The low Display value will present the T3 temperature value.

    Preparation before execute datalogger function

    1. Insert the SD card
      Prepare a " SD memory card " ( 1 GB to 16 GB, optional ), insert the SD card into the SD card socket with the correct direction exactly.
      *It’s recommended to use memory card's capacity of 4 GB.
    2. SD card Format
      If SD card just the first time use into the meter, it’s recommended to make the SD card Format at first.
      *It’s recommended not to use memory cards that have been formatted by other meter or by other installation ( such as camera... ). Reformat the memory card with your meter.
      *If the SD memory card exist the trouble during format by the meter, use the Computer to reformat again can fix the problem.
    3. Time setting
      If the meter is used at first time, you should adjust the clock time exactly.

    Frequently Asked Questions

  • Can I using Aktakom Data Logger Monitor (ADLM-W) software load all of the information from the memory card to plot a graph?
  • How can I save data from the SD card to the computer when operating AKTAKOM ATE-9380 Thermometer monitor?

  • Can I using Aktakom Data Logger Monitor (ADLM-W) software load all of the information from the memory card to plot a graph?

    The environment meter records data to the memory card in *.xls format. All of the data can be copied to the PC after the measurement process.

    Aktakom Data Logger Monitor (ADLM-W) software can be used for the measurement data transmission (using Aktakom ACE-1025 interface converter) that means for online monitoring only.


    Up

    How can I save data from the SD card to the computer when operating AKTAKOM ATE-9380 Thermometer monitor?

    1. After execute the Data Logger function, take away the SD card out from the SD card socket.
    2. Plug in the SD card into the Computer's SD card slot or insert the SD card into the SD card adapter. Then connect the SD card adapter into the computer.
    3. Power ON the computer and run the "EXCEL software". Download the saving data file (for example the file name: TMC01001.XLS, TMC01002.XLS) from the SD card to the computer. The saving data will present into the EXCEL software screen (for example as following EXCEL data screens), then user can use those EXCEL data to make the further Data or Graphic analysis usefully.

    Up

    Aktakom ATE Easy Monitor (ATEE Monitor)

    AKTAKOM ATE Easy Monitor software provides the numerical indication of 4 channel measurements as well as the data recording into file in CSV format. For the device connection the use of ACE-1025/ACE-1026 USB-RS232 interface converters is required.

    Learn more...

    Free for registered users

    Download
    (2.16 Mb)
    Product registration required

    Aktakom Data Logger Monitor (ADLM-A)

    ADLM-A software is designed for data reading from devices of AKTAKOM ATT, ATE series, for measurement data acquisition, its processing, displaying and storage in a tablet PC with Android OS of 4.0 and more advanced versions.

    Learn more...

    Aktakom Data Logger Monitor (ADLM-W)

    ADLM-w software is designed for data reading from devices of AKTAKOM ATT, ATE series, for measurement data acquisition, its processing, displaying and storage in a PC with Windows XP x32, Windows 7 x64, Windows 7x32, Windows 8 x64, Windows Vista OS.

    Learn more...


    Back to the section
     

    Please give us your feedback to help us improve our website

    * - required fields

    Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2017