Español

ATK-2001 Clamp Meter

AKTAKOM ATK-2001 Clamp Meter
Click an image to enlarge
Brand: AKTAKOM
Warranty: 1 year
User's Guide: Download
True RMS Bar graph indicator

Highly sensitive handheld clamp meter with AC/DC resolution of up to 0.1 mA/1 mA.

Retail price : $339.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Almost sold out, 3 left

Buy Add to cart

AKTAKOM ATK-2001 is a highly sensitive handheld clamp meter with AC/DC resolution of up to 0.1 mA/1 mA. ATK-2001 has an embedded universal multimeter equipped with a special input to connect measuring adapters with millivolt output.

DC Voltage (DCV)400 V
DCV Accuracy±1.0%
DCV Resolution0.1 V
AC Voltage (ACV)400 V
ACV Accuracy±2.0%
ACV Resolution0.1 V
DC Current (DCA)30 A
DCA Accuracy±2.0%
DCA Resolution1 mA
AC Current (ACA)30 A
ACA Accuracy±2.0%
ACA Resolution0.1 mA
True RMS+
Data hold+
Min/Max measurement+
Relative measurement+
Jaw size0.9 in / 23 mm
DisplayLCD, 4000 counts
Bar graph indicator+
Power supply2 x 1.5 V batteries
Dimensions7.2 x 2.4 x 1.4 in / 183 x 61.3 x 35.6 mm

Accuracy tables

DC Voltage

RangeResolutionAccuracyAbsolute errorValue-errorValue Learn an absolute error of your measurementValue+error
400 V 0.1 V ±(1%+3 digits) ±4.299 V V

AC Voltage

RangeResolutionAccuracyAbsolute errorValue-errorValueValue+error
400 V 0.1 V ±(2%+5 digits) ±8.498 V V

DC Current

RangeResolutionAccuracyAbsolute errorValue-errorValueValue+error
4000 mA 1 mA ±(2%+5 digits) ±84.98 mA mA
30 A 10 mA ±(2%+3 digits) ±0.6298 A A

AC Current

RangeResolutionAccuracyAbsolute errorValue-errorValueValue+error
400 mA 0.1 mA ±(2%+5 digits) ±8.498 mA mA
4000 mA 1 mA ±(2.5%+8 digits) ±107.975 mA mA
30 A 10 mA ±(2%+5 digits) ±0.6498 A A

Specifications:

  • High resolution when measuring 1 mA DC, 0.1 mA AC
  • Single button pressing to set “0” when measuring the direct current
  • Noncontact frequency measurement
  • True RMS measurement
  • Relative measurements
  • Grip diameter: 0.9 in / 23 mm
  • 3ѕ digit LCD (4000 digits)
  • Graphical analog scale
  • Data hold function
  • Max. and min. values hold
  • Overload indication
  • Low battery charge indication
  • Dimensions: 7.2 x 2.4 x 1.4 in / 183 x 61.3 x 35.6 mm
  • Weight: 6.7 oz / 190 g

Direct current

Measurement range
Resolution Accuracy Overload protection
0 - 4000 mA 1 mA ± (2.0 % + 3 dgt) 40 A direct
0- 30 A 10 mA ± (2.0 % + 3 dgt) 100 A alternating

Alternating current

Measurement range
Resolution Accuracy for 50/60 Hz range
Accuracy for 40...1000 Hz* range
Overload protection
400 mA
0.1 mA ± (2.0 %.+ 5 dgt) ± (4.0 % + 5 dgt)** 40 A direct
4000 mA 1 mA ± (2.5 % + 5 dgt) ± (3.0 % + 5 dgt)
30 A 10 mA ± (2.0 % + 5 dgt) ± (2.5 % + 5 dgt) 100 A alternating

* except 50...60 Hz
** frequency range 40...400 Hz

DC voltage (input imdepance: 10 MΩ)

Range Resolution Accuracy Overload protection
400 V 0.1 mV ± (1.0 %+ 2 dgt) 1000 V

AC voltage (input imdepance: 10 MΩ, True RMS, form factor < 4)

Measurement range
Resolution Accuracy Overload protection
50/60 Hz 40...1000 Hz
400 V 0.1 V
± (1.5 %+ 4 dgt) ± (2.0 %+ 5 dgt) 800 V alternating

  • Carrying case
  • 2 batteries
  • User manual

Controls of AKTAKOM ATK-2001 Clamp Meter

Controls of ATK-2001 Clamp Meter

Frequently Asked Questions

  • How can I measure Max/Min values with AKTAKOM ATK-2001 clamp meter?
  • How can I hold the readings on the LCD when operating AKTAKOM ATK-2001 clamp meter?
  • How can I measure DC/AC current with AKTAKOM ATK-2001 clamp meter?
  • How can I measure DC/AC voltage with AKTAKOM ATK-2001 clamp meter?
  • How can I take relative reading measurements with AKTAKOM ATK-2001 clamp meter?

  • How can I measure Max/Min values with AKTAKOM ATK-2001 clamp meter?

    Press MAX/MIN button to enable the maximum and minimum values. Press the button once, the maximum value shall be displayed and updated. After you press this button secondly the LCD will display the minimum value. To return to the normal mode you need to press this button for the third time. To exit MAX/MIN function, press and hold the MAX/MIN button for more than 2 seconds. The Zero/Relative function will be disabled as well if you press MAX/MIN button.


    Up

    How can I hold the readings on the LCD when operating AKTAKOM ATK-2001 clamp meter?

    Press HOLD button, then the readings shall be hold and kept on the LCD. If you double press this button the data updating will be restored.


    Up

    How can I measure DC/AC current with AKTAKOM ATK-2001 clamp meter?

    Note: Make sure that all the test leads are disconnected from the meter terminals for current measurement.

    1. For DC current set the rotary switch at mA DC or 40A DC. Push the zero button to adjust the reading to zero. Due to the high sensitivity of ATK-2001 clamp meter zero must be set in the same direction as during the measurement process to avoid interference by external magnetic field.
    2. For AC current set the rotary switch at 400mA AC, 4000mA or 30A AC.
    3. Press the trigger to open the jaw and fully enclose the conductor to be measured. No air gap is allowed between the two half jaws.
    4. Read the measured value from the LCD display.


    Up

    How can I measure DC/AC voltage with AKTAKOM ATK-2001 clamp meter?

    Note: Maximum input for DC V is 600, and for AC V is 600. Do not take any voltage measurement that exceeds these limits. Exceeding the limits could cause electrical shock and damage to the clamp meter.

    1. For DC voltage measurement set the rotary switch to V DC. For AC voltage measurement set the rotary switch to V AC.
    2. Insert the test leads into the input jack.
    3. Connect the test prods of the test leads in PARALLEL to the circuit to be measured.
    4. Read the measured value from the LCD display.


    Up

    How can I take relative reading measurements with AKTAKOM ATK-2001 clamp meter?

    The zero button also can be used to make a relative measurement. After the button is pressed the current reading is set to zero and “∆” symbol shall be displayed on the LCD. All the subsequent measurement shall be displayed as a relative value with respect to the value being zeroed. Press the zero button again and keep it pressed for 2 seconds to return to the normal mode. This function is disabled as well if you press MAX/MIN button.


    Up


    Back to the section
     

    Please give us your feedback to help us improve our website

    * - required fields

    Site map|Privacy statement|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2017