Company news

AKTAKOM APS-1503 DC power supply is used to supply radio equipment with stabilized voltage or current when operating in debugging process, repair and laboratory research.

AKTAKOM AM-1083 is a stable and battery-driven 3 1/2 digital multimeter. It is equipped with a large LCD clearly displaying the device measuring values. This multimeter can be used to measure DCV, ACV, DC, AC, resistance, capacitance, inductance, diode, triode, open circuit, temperature and frequency, as well as hold peak value. One of the features is the availability of overload protection.

AKTAKOM ASE-1102 is a professional temperature controlled soldering station which is especially recommended for transistors and microchips assembly produced in accordance with CMOS technology. The temperature can be easily regulated with a rotary switch on the front panel.

To protect electronic circuits when working with electronic components, boards and devices from potential danger it’s necessary to use protective ground equipment. AKTAKOM keeps a wide range of antistatic tools and equipment for this purpose.

In case you are looking for reliable solution to diagnose automotive equipment AKTAKOM AMM-1009 general purpose digital multimeter can be considered good decision therefore.

AKTAKOM AWG-4150 generator is designed using direct digital synthesis (DDS) technology which ensures high frequency accuracy, low distortion, a fast transition from one frequency to another and lots of other high metrological parameters. AWG-4150 represents both function and arbitrary waveform generator.

To make your work with our measuring equipment easy and maximum convenient we keep on implementing new services.

If you have any questions concerning AKTAKOM APS-7306 power supply operation you may check the FAQ tab on this device page where we have added the most frequently asked questions and the respective answers.

One of the important parameters of three phase networks is phase interlacing. Disregarding of this parameter can cause the equipment failure. AKTAKOM ACM-6060 Phase rotation tester is used to control the correct connectivity of three phase equipment before the installation and during the test operation.

AKTAKOM ATE-1034 hot-wire anemometer-thermometer is a compact device with wide functionality. Due to the small diameter of its probe (only 12 mm) this device is very convenient for using in hard-to-reach areas. Moreover the probe handle is extension-type (from 280 to 940 mm) which makes it possible to broaden the ranges of this anemometer use.

News 141 - 150 of 394
First | Prev. | 13 14 15 16 17 | Next | Last