In 2016 there has been a news series of remotely controlled laboratory power supplies released – Aktakom APS-3xxxLS which has external triggering inputs and which are relevant to the group of LXI standard class C measuring devices. In order to use these laboratory power supplies in measuring systems there are several variants of Software Development Kits represented on our web site including APS-3xxxLx_SDK_Base; APS-3xxxLx_SDK and innovative Aktakom APS-3xxxLx_SDK_MS_VB SDK.
At the moment our Online store includes an absolutely new model. This is AKTAKOM ACE-1748 8-channel USB / LAN input-output module which is designed to remotely monitor the status of sensors (the sensors that have “on” or “off” output statuses) and to control discrete input devices that can be terminated with the monostable relay.
Up-to-date AKTAKOM clamp meters allow you to measure this important parameter fast and efficiently without the network breakup. AKTAKOM ATK-2301 Watt clamp meter with max. resolution 10µA is designed to measure leakage current, this model allows measuring active (0,001W...9999kW), reactive and full power as well as power factor (cos ɸ).
AKTAKOM ATK-4001 clamp meter is designed for grounding resistance, leakage current measuring as well as for continuity test. This model allows user to take measurements only on one ground wire without using any additional electrodes, also ATK-4001 can be used to test multiple grounds systems without turning them off.
We would like to introduce a professional package for research in such areas like electronics, communication, defense, aerospace, industrial electronics, R&D and education - Aktakom-Rigol PRO package (RA-14).
New package includes: Rigol DS4024 200 MHz Digital Oscilloscope, Aktakom APS-3320L DC Power Supply, RIGOL DG2041A function/arbitrary waveform generator.
RIGOL DS1054Z low cost digital oscilloscope is recognized as the most popular innovative product of 2014! This new model has broadened Rigol DS/MSO1000Z series digital oscilloscopes and now it is available from stock!
AM-1118 multimeter support is now added to Aktakom DMM Light software of 184.108.40.206 version. Multimeter AM-1118 has wide range of functions from voltage measurement to temperature measurement with PC data transfer function via built-in optically isolated USB interface. Version 220.127.116.11 of Aktakom DMM Light software has been successfully tested and perfectly operates with Windows 10, Windows XP x32, Windows 7 x32, Windows 8 x32, Windows 8.1 x32, Windows 7 x64, Windows 8 x64, Windows 8.1 x64.
AKTAKOM APS-3320L Single Output DC Regulated Bench power supply is based on a linear circuit of stabilization and structurally it’s assembled on SMD components. This circuit solution provides easy setting and control of the device, high stability of output parameters, low ripple and noise, and also it helps to significantly reduce the device dimensions.
AKTAKOM ASE-4313 multifunctional soldering rework station is designed for a wide range of repair works and it represents 3 devices in one. Powerful embedded vacuum pump has throughput capability of up to 150 l/min and the commutatorless motor provides a low noise level.
As any other information measurement data are stored in some files. Formats which are used therefore can be different.
Check the most popular file formats in “Software” section of our Design Engineer Valued Creative Encyclopedia.
When we speak about today science we should remember whose knowledge and force have contributed to its development. In our Design Engineer Valued Creative Encyclopedia there is special section named Persona where you may read about well-known scientists and academics.
13 - 15 of 59 First
NI, the provider of platform-based systems that enable engineers and scientists to solve the world’s greatest engineering challenges, announced new embedded systems hardware based on the open, flexible LabVIEW reconfigurable I/O (RIO) architecture. This hardware includes the high-performance CompactRIO Controller for integrators with rugged, industrial applications, Controller for FlexRIO for designers with high-performance embedded applications and Single-Board RIO Controller for designers who require more flexibility in their embedded applications.
Rohde & Schwarz designed its GNSS simulator for the R&S SMBV100A with a focus on production testing of GNSS receivers. The fast GNSS production tester supports the GPS, Glonass, BeiDou and Galileo satellite systems and includes a wealth of additional test functions for characterizing GNSS chipsets and modules.
Anritsu Company introduces SkyBridge Tools™, a cloud-based trace judgment solution for tower and in-building Distributed Antenna System (DAS) installations that reduces costs and improves ROI. Serving as a data warehouse for contractors who are installing or modifying equipment for network operators, SkyBridge Tools saves time, reduces rework, and makes timely payment more likely by automating the trace judgment process.
112 - 114 of 613 First