In 2016 there has been a news series of remotely controlled laboratory power supplies released – Aktakom APS-3xxxLS which has external triggering inputs and which are relevant to the group of LXI standard class C measuring devices. In order to use these laboratory power supplies in measuring systems there are several variants of Software Development Kits represented on our web site including APS-3xxxLx_SDK_Base; APS-3xxxLx_SDK and innovative Aktakom APS-3xxxLx_SDK_MS_VB SDK.
At the moment our Online store includes an absolutely new model. This is AKTAKOM ACE-1748 8-channel USB / LAN input-output module which is designed to remotely monitor the status of sensors (the sensors that have “on” or “off” output statuses) and to control discrete input devices that can be terminated with the monostable relay.
Up-to-date AKTAKOM clamp meters allow you to measure this important parameter fast and efficiently without the network breakup. AKTAKOM ATK-2301 Watt clamp meter with max. resolution 10µA is designed to measure leakage current, this model allows measuring active (0,001W...9999kW), reactive and full power as well as power factor (cos ɸ).
AKTAKOM ATK-4001 clamp meter is designed for grounding resistance, leakage current measuring as well as for continuity test. This model allows user to take measurements only on one ground wire without using any additional electrodes, also ATK-4001 can be used to test multiple grounds systems without turning them off.
We would like to introduce a professional package for research in such areas like electronics, communication, defense, aerospace, industrial electronics, R&D and education - Aktakom-Rigol PRO package (RA-14).
New package includes: Rigol DS4024 200 MHz Digital Oscilloscope, Aktakom APS-3320L DC Power Supply, RIGOL DG2041A function/arbitrary waveform generator.
RIGOL DS1054Z low cost digital oscilloscope is recognized as the most popular innovative product of 2014! This new model has broadened Rigol DS/MSO1000Z series digital oscilloscopes and now it is available from stock!
AM-1118 multimeter support is now added to Aktakom DMM Light software of 220.127.116.11 version. Multimeter AM-1118 has wide range of functions from voltage measurement to temperature measurement with PC data transfer function via built-in optically isolated USB interface. Version 18.104.22.168 of Aktakom DMM Light software has been successfully tested and perfectly operates with Windows 10, Windows XP x32, Windows 7 x32, Windows 8 x32, Windows 8.1 x32, Windows 7 x64, Windows 8 x64, Windows 8.1 x64.
AKTAKOM APS-3320L Single Output DC Regulated Bench power supply is based on a linear circuit of stabilization and structurally it’s assembled on SMD components. This circuit solution provides easy setting and control of the device, high stability of output parameters, low ripple and noise, and also it helps to significantly reduce the device dimensions.
AKTAKOM ASE-4313 multifunctional soldering rework station is designed for a wide range of repair works and it represents 3 devices in one. Powerful embedded vacuum pump has throughput capability of up to 150 l/min and the commutatorless motor provides a low noise level.
“Absolute measurement error” service allows you to estimate the measurement accuracy considering uncertainty (error) in the absolute value. It’s important if you take measurements at the range edge when the error value contributes to the value displayed on the device screen.
Our web site has an interesting Measurement Fun Facts section that can always help you to relax, smile and simultaneously refresh your knowledge. Now this section includes some facts we are sure you would be interested to read.
We have updated the description of our AKTAKOM AER-1002-140 and AER-1002-110 ESD table mats.
Well known fact that it’s necessary to pay special attention to protective means against electrostatic charge. AKTAKOM AER-1002-140 and AER-1002-110 ESD table mats are put on the working area of your table and used to provide additional protection to the equipment sensitive to static electricity.
Anritsu Corporation announces the launch of MT8821C, the new Radio Communication Analyzer for research and development testing of mobile devices (User Equipment, UE) with the widest capability for supporting LTE-Advanced.
The new phase noise analyzer and VCO tester from Rohde & Schwarz enables ultrasensitive and ultra-fast phase noise measurements. The R&S FSWP also allows users to very easily measure pulsed sources and residual phase noise of RF components. Plus the instrument can be upgraded to a signal and spectrum analyzer.
Keysight Technologies, Inc. introduced a full line-up of current-voltage (I-V) analyzers for characterizing a wide range of nanomaterials and electronic devices. Referred to collectively as the Precision Current-Voltage Analyzer Series, the analyzers deliver best-in-class accuracy and performance, powerful analysis features, and support for cutting-edge applications.
127 - 129 of 612 First